CA3GD
Panel-mounted socket. 3 pin Female Connection..
CA3GS
Panel-mounted connector. 3 pin Female Connection..
CA3LD
Cable Socket. 3 pin Female Connection..
CA3LS
Cable Connector. 3 pin Male Connection...
CA6GD
Panel-mounted Socket. 6 pin Female Connection...
CA6GS
Panel-mounted connector. 6 pin Female Connection..
CA6LD
Cable Socket. 6 pin Female Connection..
CA6LS
Cable Connector. 6 pin male connection...
Cable Gland Fitted
System integrated cable gland fitted to a purchased enclosure by our technicians...
CCDG 1000T
CCDG Column Compression Load Cell, Range 1000 Tonnes. Accuracy 0.25%...
CCDG 100T
CCDG Column Compression Load Cell, Range 100 Tonnes. Accuracy 0.25%...
CCDG 200T
CCDG Column Compression Load Cell, Range 200 Tonnes. Accuracy 0.25%...
CCDG 500T
CCDG Column Compression Load Cell, Range 500 Tonnes. Accuracy 0.25%...
CDI 25
CDI 25 Compressed Air Flow Meter for local display with alarm functions. Suitable for compressed air and Nitrogen. Unit comes with two band clamps, 4 digit LED digital display. Accuracy 5% of RDG +1% FSD, Operating temperature 4-49°C...
CDI 6200
Compressed air flow meter, for pipe sizes 1/2 to 1 1/2 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure...
CDI 6400
Compressed air flow meter, for pipe sizes 2 inch to 6 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure...
CF916-1/8
Bored through stainless steel fitting for the PT916 probe. 1/8" NPT thread...
CMP3
CMP 3 Pyranometer, ISO Second Class, is suitable for solar irradiance measurements in spectral ranges of 310 to 2800nm up to a maximum of 2,000 W/m² with response time <18 seconds and typical sensitivity 10µV/W/m² that varies less than 5 % from -10 to +40°C. The pyranometer uses a 4mm..
COLGSM-868MHZ
Colinear GSM Wall mount antenna, 3dB gain with 5m of Cable and SMA male connector. Supplied with mounting bracket...
Corrosive Chemical Oval Gear Meter
The CR range of oval gear meters for corrosive chemical applications. Made with a PPS body, Hastelloy C shaft and PPS Rotors...
CP11 – Handheld Instrument for Temp, RH and CO2 Measurements
The CP11 handheld instrument is an economical multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. Operating ranges: -20 to +60°C, 0.1 to 99.95% RH and 0-5,000ppm CO2, calculated Dew Point and Wet Bulb Temperature. 18,000 values with time stamp, automatic recording (%RH/°C/ppm), 99 single values with..
CRE-S100-CAB
RS232 connection cable with CRE subsea connectors, depth rated to 4000 metres..
CS-SP10L
CS Series Current Transducer. Jumper selectable Current Ranges: 0-10, 0-20 or 0-50A with a self-powered 0-10V Output, Accuracy ±1%FS, Response Time: 0.5 Seconds. Suitable for single phase circuits with a frequency 40-100Hz. Isolation voltage 600vAC RMS. Solid Core transducer with a 22.6mm conductor hole. UL94V-0 flamablility rated ABS enclosure 63..
CS-SP420L
CS Series Current Transducer. Jumper selectable Current Ranges: 0-10, 0-20 or 0-50A with a 24vDC loop-powered 4-20mA Output, Accuracy ±1%FS, Response Time: 0.5 Seconds. Suitable for single phase circuits with a frequency 40-100Hz. Isolation voltage 600vAC RMS. Split Core transducer with a 22.6mm conductor hole. UL94V-0 flamablility rated ABS enclosure..
