TST100S
TST100S 1-Wire Temperature Sensor. Suitable for a temperature range of -40 to +85°C. Stainless Steel cylindrical probe, 30mm long with a 6mm diameter. IP65 rated with 1m of cable with soldered wires for direct connection to controller screw terminals...
USB-CAP-4-20
Spare/replacement cap for the EL-USB-4. The USB-CAP-4-20 provides the connection method to the current loop to be recorded by the EL-USB-4 data logger...
XP269C
GSKIN Medium Heat Flux Sensor. Heat flux range -150 to +150kW/m², min sensitivity 7.0µV/(W/m²), response time 0.7 secs. Plate sensing area is 10 x 10mm with a 0.5mm thickness. 1m flying lead for direction connection to meter or data logger...
3CON-0009
Mating connector for A223/320 accelerometer and LSOC inclinometers...
1360-PK-055
Low Voltage Power Communications Interface (LVPCI) Housed in Fibox Euronord Polyester Enclosure. Power Supply: 9-30vDC (200mA Max) with Galvanic Isolation. RS422 Comms Anemometer to PCI and RS232/422 Output from PCI. Operating Conditions: -30 to +60°, 5 to 95%RH. Dimensions: 260 x 160 x 93mm, Weight 2.4Kg. IP54 Rated...
3112-N
3112 Slim Series Isolated PT100 Converter suitable for conversion of 2-, 3- or 4-wire PT100 input to a 0/4-20mA, 0/1-5V or 0/2-10V output signal. Response time: less than 30ms or 300ms, Accuracy better than 0.05% of selected range, or 0.1°C. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing...
400.0413
ThermoAir 4 Directional Thermal-Electric Directional Anemometer. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-5m/s. Accuracy ±0.5% of full scale. The sensor can be used at temperatures from 0 to +60°C. The..
8032204324
N322 Electronic Thermostat for Cooling/Heating Control with Single SPDT Relay Output, Max 250vAC @ 16A. Direct Switching of compressor or electrical heater with simple ON/OFF control and a second SPST-NO Relay (Max 250vAC @ 3A) suitable for additional control or alarm. Accepts Thermocouple (Type J, K or T) Input. Measurement..
95.0013
MiniWater 20 Mini vane anemometer. Flow velocity range 0.03-10m/s with accuracy ±2% of full scale, ±3% of reading. Sensing head 22mm diameter x 28mm, probe length 175mm. Sensor is supplied with 1.8m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Plastic sensing head with..
95.0387
MiniAir20 EEX Mini Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140°C. Range 0-40m/s with a ±1.0% FS accuracy. Probe head dimensions 22mm diameter x 28mm with a probe length of 175mm and 1.8m cable with connector..
DMI815-30-RS485
DMI815 Series Single Axis Inclinometer with touchscreen display for single axis readings. Range ±30° with an accuracy of 0.01° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS485 connection..
DMI825-30-RS485
DMI825 Series Dual Axis Inclinometer with touchscreen display for X-axis and Y-axis readings. Range ±30° with an accuracy of 0.01° and 0.001° resolution. Built-in rechargeable battery suitable for up to 11 hours standalone operation from 3-4 hours charging, or infinite operation when powered (9-36vDC) by the wired connection. The RS485..
MCBH4M-SS
MCBH4M-SS miniature bulkhead connector, suitable for 4000 metres WG, stainless steel with 4 male pins. This item isn't available to purchase online but is normally held in stock. You can contact us directly to check availability and pricing. info@omni.uk.com..
PB-135-OQ
Stainless Steel Thermal Barrier for OQ610-S data loggers. Dimensions: 230mm x 320mm x 135mm, weight 10Kg approx. Thermal capacity of 4.5 Hrs at 100°C or 1.5Hrs at 300°C (max internal temp 70°C)...
PB-5002-3M
Fast Response Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 100mm long and 3.3mm in diameter with a 3m cable. Temperature range -40 to 125°C with a 10 second response time in water...
QT-C-212
SafEye Quasar 902 Transmitter Unit. Range 15-40m. Warm up time: 30 seconds. Xenon Flash Infrared Source, emits IR radiation pulse at a rate of 2 pulse per second. Pulse width of 5-10µsec. ATEX/IECEx Approved Ex d e ib [ib Gb] IIB+H2 T4 Gb, Ex tb IIIC T135°C Db. IP66 and..
1120 Peli Case
The 1120 Peli case is a small protective carry case which is IP67 rated and can be supplied with the Pick N Pluck foam insert. Cases are available in black, orange or yellow with standard interior dimensions of 188L x 125W x 76H. The 1120 is suitable for use with..
MAP-K-G6-3
Air Temperature probe with clamp 6.0m PTFE coated, triple insulated cable. Suitable for use with magnetic substrate materials..
OLCT10-512
OLCT10 Fixed Gas Detector for R404A Refrigerant Gas Range 0-2000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 157 x 60mm, IP65...
PB-5002-5M
Fast Response Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 100mm long and 3.3mm in diameter with a 5m cable. Temperature range -40 to 125°C with a 10 second response time in water...
OLCT10-514
OLCT10 Fixed Gas Detector for R410A Refrigerant Gas Range 0-1000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 126 x 63mm, IP65...
40/40-001
Stainless Steel Tilt Mount for 40/40 SharpEye Flame Detectors...
AP-PC-KIT
PC Kit supplied with PC software and USB cable. Suitable to connect and configure Aquaprobe sensors on a PC...
AquaSonde Vent/Data Hub
AquaSonde Vent/Data Hub is a termination hub that allows a vented cable and desiccant bottle to be attached. Allowing the sensors vent tube to be protect from moisture build up and provides access to the data collected from a Leveline or Aquaread sensor. It can also be used to allow..