Products

Grid View
List View

Edit Content

CA-01/17

Rutland 914i Wind Generator, 12V O/P. ...

CA-02/05

Rutland FM910-4 Wind Charger, 24V Output ...

CA-03/02+CA-04/14

Rutland FM1803 Furlmatic inc MPC2 Control Gear 12V ...

CA-05/04

Rutland 504 Wind Generator, 12v O/P.Generates 25W at 19 knots wind speeds up to a maximum 60W. ...

CA-06/01

Rutland WG1200 Windcharger 12V Output. 483W at 29 knots wind speed. ...

CA-10/201

25W SunWare Slimline Photovoltaic Solar Panel, SW-20145. Charging current of up to 1.37A at a nominal 12V (Max 20.83V). Light-weight mounting plate made from Aluminium sandwich, powder-coated white with 8 drill holes for mounting panel. Panel may also be secured using glue or SunWare fixing clips (available separately). Front junction ...

CA-10/450

SpectraLite SemiFlex Solar Panel. Peak Output 10 Watts. Mono Crystalline Solar Cells with standard ETFE non-slip coating. 4 Corner eyelets for safe and easy installation. Semi-flexible modules with a sealed junction box with blocking diode and 3m of output cable. Dimension 450 x 300 x 4mm . Gross weight 0.7Kg. ...

CA-10/91

10M Multimount Ameresco Photovoltaic Solar Panel Max power 10W, with a charging current of up to 0.56A at a Nominal voltage of 12V (Max 17.9V). Panel includes 36 crystalline silicon cut cells connected in series with EVA encapsulated 3.2mm high transmission glass front cover and white polyester backing on to ...

CA-11/45

HRS 503 12V (for Rutland 500 Series) ...

CA-12/0010

Solar Mounting Kit for a 10W Ameresco Solar Panel U-bolts are required for pole mounting ...

CA-12/01

Marine Stays Kit for Rutland 503 & 504 Wind Chargers. This marine mounting kit includes 2 x 1.0m length stainless steel tubes (38mm diameter), tube joiner & fasteners, deck brackets, guy brackets & fasteners, etc (does not include deck through bolts). Tubes can be cut to size if required with ...

CA-17/03

Sealed Gel Battery. Storage Capacity 7.7Ah, Output 12V. Dimensions: 151 x 65 x 99mm. Weight: 2.5Kg ...

CA-17/17

Absorbed Glass Matt (AGM) Battery. Storage Capacity 13Ah, Output 12V. Dimensions: 151 x 98 x 106mm. Weight: 4Kg ...

CAB4COREHT

High Temperature Silicone Cable, 4 Core, 50m Reel ...

Cable Glands

Compression type cable glands provide sealing and retention for a wide range of cables for general indoor and outdoor applications. ...

CDI 5200

Compressed air flow meter, for pipe sizes ½ to 1½ inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature -7-49°C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P ...

CDI 5250

CDI5250 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating ...

CDI 5450

CDI5450 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating ...

CE4DMID001

MID Certified Conto-D4-Pt Energy Meter. Suitable for measuring the kWh generated by the solar panels in three phase systems in either 230V or 400V ranges. Meters use 5A CT Clamps for current measurement of each phase and generate pulse and RS485 Modbus outputs. Power Supply 230V. Suitable for submetering applications ...

CE4DT06A2

Conto D4-Pd kWh meter with single or three phase input for direct connection up to 63 amps, DIN rail mount, with pulse output ...

CE4ST14A2/770

Multifunction power metre for single or three phase supplies, 1 & 5 Amp CT input with pulse KWh output. ...

CGR4 Pyrgeometer

The CGR4 is a pyrgeometer, designed for top level solar radiation monitoring networks such as the Baseline Surface Radiation Network (BSRN) of the World Meteorological Organisation for the meteorological measurements of downward atmospheric longwave radiation. The CGR4 uses a thermopile detectors and has a sensitivity of 5 to 15V/W/m in ...

CHAR-INLINE-12V

Switch mode bench-top charger unit for lead acid batteries. Capacity up to 12Ah. Charge Current 4A. Input Voltage 100 to 264 vAC. Output Voltage 12vDC, Output Power Max 14.7W. 2 pin IEC 320 connection. Mains lead available separately ...

CMC-141

CMC-141 Multi-Channel Display/Data Logger. 5.7" touchscreen display for digital, bar graph and graphical display of process values of up to 72 analogue inputs, 36 relay/SSR outputs and 18 current outputs. An RS485 Modbus RTU interface allows for integration into local Modbus networks. Power supply options of 19-50vDC and 85-260vAC. Internal ...

Edit Content

CA-01/17

Rutland 914i Wind Generator, 12V O/P. ...

CA-02/05

Rutland FM910-4 Wind Charger, 24V Output ...

CA-03/02+CA-04/14

Rutland FM1803 Furlmatic inc MPC2 Control Gear 12V ...

CA-05/04

Rutland 504 Wind Generator, 12v O/P.Generates 25W at 19 knots wind speeds up to a maximum 60W. ...

CA-06/01

Rutland WG1200 Windcharger 12V Output. 483W at 29 knots wind speed. ...

CA-10/201

25W SunWare Slimline Photovoltaic Solar Panel, SW-20145. Charging current of up to 1.37A at a nominal 12V (Max 20.83V). Light-weight mounting plate made from Aluminium sandwich, powder-coated white with 8 drill holes for mounting panel. Panel may also be secured using glue or SunWare fixing clips (available separately). Front junction box includes 3m of cable and is fully sealed against water ingress. Panel dimensions: 807 x 273 x 16mm, weight (net) 1.6Kg. Panels are supplied ...

CA-10/450

SpectraLite SemiFlex Solar Panel. Peak Output 10 Watts. Mono Crystalline Solar Cells with standard ETFE non-slip coating. 4 Corner eyelets for safe and easy installation. Semi-flexible modules with a sealed junction box with blocking diode and 3m of output cable. Dimension 450 x 300 x 4mm . Gross weight 0.7Kg. ...

CA-10/91

10M Multimount Ameresco Photovoltaic Solar Panel Max power 10W, with a charging current of up to 0.56A at a Nominal voltage of 12V (Max 17.9V). Panel includes 36 crystalline silicon cut cells connected in series with EVA encapsulated 3.2mm high transmission glass front cover and white polyester backing on to a Silver anodised Aluminium frame. The Multimount frame allows for side or rear mounting using M8 or 5/16" hex-head bolts using dual channel grooves designed ...

CA-11/45

HRS 503 12V (for Rutland 500 Series) ...

CA-12/0010

Solar Mounting Kit for a 10W Ameresco Solar Panel U-bolts are required for pole mounting ...

CA-12/01

Marine Stays Kit for Rutland 503 & 504 Wind Chargers. This marine mounting kit includes 2 x 1.0m length stainless steel tubes (38mm diameter), tube joiner & fasteners, deck brackets, guy brackets & fasteners, etc (does not include deck through bolts). Tubes can be cut to size if required with 4 end caps. Hinged clamps to fix to the rail have a 32mm diameter with rubber inserts to absorb any vibration that may occur and ...

CA-17/03

Sealed Gel Battery. Storage Capacity 7.7Ah, Output 12V. Dimensions: 151 x 65 x 99mm. Weight: 2.5Kg ...

CA-17/17

Absorbed Glass Matt (AGM) Battery. Storage Capacity 13Ah, Output 12V. Dimensions: 151 x 98 x 106mm. Weight: 4Kg ...

CAB4COREHT

High Temperature Silicone Cable, 4 Core, 50m Reel ...

Cable Glands

Compression type cable glands provide sealing and retention for a wide range of cables for general indoor and outdoor applications. ...

CDI 5200

Compressed air flow meter, for pipe sizes ½ to 1½ inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature -7-49°C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P ...

CDI 5250

CDI5250 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating temperature 4-49°C. ...

CDI 5450

CDI5450 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating temperature 4-49°C. ...

CE4DMID001

MID Certified Conto-D4-Pt Energy Meter. Suitable for measuring the kWh generated by the solar panels in three phase systems in either 230V or 400V ranges. Meters use 5A CT Clamps for current measurement of each phase and generate pulse and RS485 Modbus outputs. Power Supply 230V. Suitable for submetering applications or solar panel efficiency monitoring. ...

CE4DT06A2

Conto D4-Pd kWh meter with single or three phase input for direct connection up to 63 amps, DIN rail mount, with pulse output ...

CE4ST14A2/770

Multifunction power metre for single or three phase supplies, 1 & 5 Amp CT input with pulse KWh output. ...

CGR4 Pyrgeometer

The CGR4 is a pyrgeometer, designed for top level solar radiation monitoring networks such as the Baseline Surface Radiation Network (BSRN) of the World Meteorological Organisation for the meteorological measurements of downward atmospheric longwave radiation. The CGR4 uses a thermopile detectors and has a sensitivity of 5 to 15V/W/m in a spectral range of 4.5 to 42m. This pyrgeometer has a specially designed silicon meniscus dome with a hard-carbon coating for a smooth spectral response ...

CHAR-INLINE-12V

Switch mode bench-top charger unit for lead acid batteries. Capacity up to 12Ah. Charge Current 4A. Input Voltage 100 to 264 vAC. Output Voltage 12vDC, Output Power Max 14.7W. 2 pin IEC 320 connection. Mains lead available separately ...

CMC-141

CMC-141 Multi-Channel Display/Data Logger. 5.7" touchscreen display for digital, bar graph and graphical display of process values of up to 72 analogue inputs, 36 relay/SSR outputs and 18 current outputs. An RS485 Modbus RTU interface allows for integration into local Modbus networks. Power supply options of 19-50vDC and 85-260vAC. Internal logging memory for up to 125 million readings, expandable via USB memory stick. Case Dimensions:144 x 144 x 100mm. Logging option required additional logger licence ...

CA-01/17

Rutland 914i Wind Generator, 12V O/P. ...

CA-02/05

Rutland FM910-4 Wind Charger, 24V Output ...

CA-03/02+CA-04/14

Rutland FM1803 Furlmatic inc MPC2 Control Gear 12V ...

CA-05/04

Rutland 504 Wind Generator, 12v O/P.Generates 25W at 19 knots wind speeds up to a maximum 60W. ...

CA-06/01

Rutland WG1200 Windcharger 12V Output. 483W at 29 knots wind speed. ...

CA-10/201

25W SunWare Slimline Photovoltaic Solar Panel, SW-20145. Charging current of up to 1.37A at a nominal 12V (Max 20.83V). Light-weight mounting plate made from Aluminium sandwich, powder-coated white with 8 drill holes for mounting panel. Panel may also be secured using glue or SunWare fixing clips (available separately). Front junction ...

CA-10/450

SpectraLite SemiFlex Solar Panel. Peak Output 10 Watts. Mono Crystalline Solar Cells with standard ETFE non-slip coating. 4 Corner eyelets for safe and easy installation. Semi-flexible modules with a sealed junction box with blocking diode and 3m of output cable. Dimension 450 x 300 x 4mm . Gross weight 0.7Kg. ...

CA-10/91

10M Multimount Ameresco Photovoltaic Solar Panel Max power 10W, with a charging current of up to 0.56A at a Nominal voltage of 12V (Max 17.9V). Panel includes 36 crystalline silicon cut cells connected in series with EVA encapsulated 3.2mm high transmission glass front cover and white polyester backing on to ...

CA-11/45

HRS 503 12V (for Rutland 500 Series) ...

CA-12/0010

Solar Mounting Kit for a 10W Ameresco Solar Panel U-bolts are required for pole mounting ...

CA-12/01

Marine Stays Kit for Rutland 503 & 504 Wind Chargers. This marine mounting kit includes 2 x 1.0m length stainless steel tubes (38mm diameter), tube joiner & fasteners, deck brackets, guy brackets & fasteners, etc (does not include deck through bolts). Tubes can be cut to size if required with ...

CA-17/03

Sealed Gel Battery. Storage Capacity 7.7Ah, Output 12V. Dimensions: 151 x 65 x 99mm. Weight: 2.5Kg ...

CA-17/17

Absorbed Glass Matt (AGM) Battery. Storage Capacity 13Ah, Output 12V. Dimensions: 151 x 98 x 106mm. Weight: 4Kg ...

CAB4COREHT

High Temperature Silicone Cable, 4 Core, 50m Reel ...

Cable Glands

Compression type cable glands provide sealing and retention for a wide range of cables for general indoor and outdoor applications. ...

CDI 5200

Compressed air flow meter, for pipe sizes ½ to 1½ inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature -7-49°C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P ...

CDI 5250

CDI5250 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating ...

CDI 5450

CDI5450 Hot-tap Compressed Air Flow Meter, suitable for compressed air and Nitrogen. Unit is supplied with a single Aluminium fixing ring, base assembly and hot tap drill guide. The flow meter includes a 4 digit LED digital display with 4-20mA and pulse output. Accuracy 5% of RDG +1% FSD, operating ...

CE4DMID001

MID Certified Conto-D4-Pt Energy Meter. Suitable for measuring the kWh generated by the solar panels in three phase systems in either 230V or 400V ranges. Meters use 5A CT Clamps for current measurement of each phase and generate pulse and RS485 Modbus outputs. Power Supply 230V. Suitable for submetering applications ...

CE4DT06A2

Conto D4-Pd kWh meter with single or three phase input for direct connection up to 63 amps, DIN rail mount, with pulse output ...

CE4ST14A2/770

Multifunction power metre for single or three phase supplies, 1 & 5 Amp CT input with pulse KWh output. ...

CGR4 Pyrgeometer

The CGR4 is a pyrgeometer, designed for top level solar radiation monitoring networks such as the Baseline Surface Radiation Network (BSRN) of the World Meteorological Organisation for the meteorological measurements of downward atmospheric longwave radiation. The CGR4 uses a thermopile detectors and has a sensitivity of 5 to 15V/W/m in ...

CHAR-INLINE-12V

Switch mode bench-top charger unit for lead acid batteries. Capacity up to 12Ah. Charge Current 4A. Input Voltage 100 to 264 vAC. Output Voltage 12vDC, Output Power Max 14.7W. 2 pin IEC 320 connection. Mains lead available separately ...

CMC-141

CMC-141 Multi-Channel Display/Data Logger. 5.7" touchscreen display for digital, bar graph and graphical display of process values of up to 72 analogue inputs, 36 relay/SSR outputs and 18 current outputs. An RS485 Modbus RTU interface allows for integration into local Modbus networks. Power supply options of 19-50vDC and 85-260vAC. Internal ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Products

CA-01/17

CA-02/05

CA-03/02+CA-04/14

CA-05/04

CA-06/01

CA-10/201

CA-10/450

CA-10/91

CA-11/45

CA-12/0010

CA-12/01

CA-17/03

CA-17/17

CAB4COREHT

Cable Glands

CDI 5200

CDI 5250

CDI 5450

CE4DMID001

CE4DT06A2

CE4ST14A2/770

CGR4 Pyrgeometer

CHAR-INLINE-12V

CMC-141

CA-01/17

CA-02/05

CA-03/02+CA-04/14

CA-05/04

CA-06/01

CA-10/201

CA-10/450

CA-10/91

CA-11/45

CA-12/0010

CA-12/01

CA-17/03

CA-17/17

CAB4COREHT

Cable Glands

CDI 5200

CDI 5250

CDI 5450

CE4DMID001

CE4DT06A2

CE4ST14A2/770

CGR4 Pyrgeometer

CHAR-INLINE-12V

CMC-141

CA-01/17

CA-02/05

CA-03/02+CA-04/14

CA-05/04

CA-06/01

CA-10/201

CA-10/450

CA-10/91

CA-11/45

CA-12/0010

CA-12/01

CA-17/03

CA-17/17

CAB4COREHT

Cable Glands

CDI 5200

CDI 5250

CDI 5450

CE4DMID001

CE4DT06A2

CE4ST14A2/770

CGR4 Pyrgeometer

CHAR-INLINE-12V

CMC-141

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.