CGR4 Pyrgeometer
The CGR4 is a pyrgeometer, designed for top level solar radiation monitoring networks such as the Baseline Surface Radiation Network (BSRN) of the World Meteorological Organisation for the meteorological measurements of downward atmospheric longwave radiation. The CGR4 uses a thermopile detectors and has a sensitivity of 5 to 15V/W/m in..
CSD3 Sunshine Duration Sensor
The CSD 3 is used for monitoring sunshine duration and automates the process previously undertaken by a traditional Campbell-Stokes recorder. The CSD 3 measures solar radiation through a high quality glass tube. It has no moving parts and uses 3 photo-diodes with specially designed diffusers to make an analogue calculation..
RaZON+ All-In-One Solar Monitoring System
The RaZON+ is an all-in-one solar monitoring system that can accurately monitor the direct and diffuse solar irradiance. The unit comes with integrated pyrheliometer to measure the DNI and a shaded pyranometer to measure the DHI. The RaZON+ uses the DNI and DHI values to calculate the Global Horizontal Solar..
SP Lite2 Silicon Pyranometer
The SP Lite2 Silicon cell photo-diode pyranometer offers an economical solution for the reliable routine measurement of incoming global solar irradiance. It has a conical diffuser that offers excellent directional (cosine) response, causes rain to run off and is easy to keep clean. The SP Lite2 can be used under..
SGR4 Smart Pyrgeometer
The SGR4 is a Smart Pyrgeometer, designed to provide meteorological measurements of downward atmospheric long wave radiation. The construction of SGR4 pyrgeometers is identical to the CGR4 pyrgeometers but it includes a Modbus interface and amplified analogue output. The SGR4 uses a thermopile detector in a spectral range of 4.5..
CMP3 Pyranometer
The CMP3 is a spectrally flat class C pyranometer that is smaller and lighter than the other CMP series pyranometers, providing an economical solution for the routine measurement of incoming global solar radiation. The CMP3 uses a 64-junction thermopile detectors and provides an expected output of 0-48mV based on a..
CUV5 Ultra-Violet Radiometer
The CUV 5 radiometer measures the total UV irradiance of the UVA and UVB components. The CUV 5 uses a photo-diode sensors with optical filters located behind a specially shaped diffuser and glass dome for a very good UV transmission and excellent directional response. Sensitivity of 300 to 500V/W/m for..
Solys2 Sun Tracker
SOLYS2 is a cost-effective and simple sun tracking solution. It does not require a computer and software for installation because the integrated GPS automatically configures location and time data. Multi-colour LEDs indicate the operating status. The high-efficiency belt drive system requires no maintenance and the low consumption makes it ideal..
SMP3 Smart Pyranometer
The SMP3 Pyranometer is a spectrally flat class C pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP3 is identical to the CMP3 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V..
SUV Series UV Spectrum Radiometers
The SUV series of Smart UV Radiometers provide outputs for specific types of Ultraviolet radiation. The SUV range includes units optimised for a specific band of UV radiation, each unit is adapted for UVA, UVB and the UVE Erythemal (sunburn) action spectrum of the human skin. These units are identical..
CMP6 Pyranometer
The CMP6 Pyranometer is a Spectrally Flat Class B pyranometer that has a similar detector to the CMP3 but with improved performance. The CMP6 uses a 64-junction thermopile detectors and provides an expected output of 0-30mV based on a sensitivity of 5 to 20µV/W/m². The CMP6 has two, 2mm thick,..
SMP6 Smart Pyranometer
The SMP6 Pyranometer is a Class B pyranometer with industry standard digital and analogue amplified outputs. The SMP6 is identical to the CMP6 pyranometer but includes an RS485 Modbus RTU interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The SMP6 has a dual-dome construction with..
CMP10 Pyranometer
The CMP10 Pyranometer is a Spectrally Flat Class A pyranometer which provides a faster response, better linearity and a wider measurement range than the CMP3 and CMP6. The CMP10 has been update to the CMP10X pyranometer. It maintains the improved thermopile detector, providing an expected output of 0-24mV based on..
NR Lite2 Net Radiometer
The NR Lite2 is a single component net radiometer used for monitoring the difference in incoming radiation from the Sun and sky and outgoing radiation from the ground. The NR Lite2 uses a double-sided thermopile detector fitted with black PTFE coated conical absorbers with a single output for the net..
CNR4 Net Radiometer
The CNR4 net radiometer integrated 4 solar sensors into a single instrument body. The CNR4 consists of a pair of pyranometers and a pair of pyrgeometers. Each pair has one facing upwards for incoming radiation and one facing downwards for the outgoing radiation. The CNR4 has four separate output signals..
SMP10X Smart Pyranometer
The SMP10X Pyranometer is a Smart pyranometer with just the RS485 Digital Output. The SMP10 includes a sealed internal drying cartridge that allows for 10 years operation without replacement. The SMP10X is identical to the CMP10X pyranometer but includes an RS485 Modbus RTU interface allowing for an improved response time..
SMP12 Fast Response Smart Pyranometer
The new SMP12 is an industry's first fast response spectrally flat Class A Pyranometer that combines solid-state dome heating to mitigate the effects of morning dew, frost or snow. The SMP12 combines proven sensor and diffuser technology from the RaZON+ PH1 and PR1 radiometers with an enhanced version of the..
CMP21 Pyranometer
The CMP21 Pyranometer is a secondary standard pyranometer that is similar to the CMP11 but has individually optimised temperature compensation. The CMP21 uses a 32-junction thermopile detector and provides an expected output of 0-20mV based on a sensitivity of 7 to 14µV/Wm². The CMP21 has two, 2mm thick, high quality..
CMP22 Pyranometer
The CMP22 Pyranometer is a Spectrally Flat Class A pyranometer that uses very high quality quartz domes for a wider spectral range, improved directional response and reduced thermal offsets than the CMP21. The CMP22 uses a 32-junction thermopile detector and provides an expected output of 0-21mV based on a sensitivity..
SMP21 Smart Pyranometer
The SMP21 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP21 is identical to the CMP21 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA..
SMP22X Smart Pyranometer
The SMP22 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP22 is identical to the CMP22 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The SMP22 uses very high quality quartz domes..
CVF 4 Ventilation Unit
The CVF4 Ventilation unit is a low maintenance ventilation unit with a fan and inlet filter that provides a flow of clean air over the dome of a radiometer. The integrated heater allows the air to be warmed when necessary. The fan of the CVF4 runs continuously to reduce dust..
DustIQ Soiling Monitoring System
The DustIQ Soiling Monitoring System is a professional-grade solution designed for accurate measurement of PV module soiling in solar power plants. Using unique Optical Soiling Measurement (OSM) technology, it continuously reports the Soiling Ratio (SR), Transmission Loss (TL), and module temperature every minute, day or night. Constructed from the same..
Meteon Data Logger
The Meteon is an accurate handheld display and data logger designed specifically for the measurement of solar irradiance in combination with Kipp & Zonen radiometers and pyranometers. The Meteon will log up to 3500 samples, storing min, max and average value per logging interval. The logger will operate for 50..
