LSI Series gravity referenced servo inclinometer, linearity 0.02% FRO, operating temperature -20 to +80°C, output 5vDC.Power supply 9 - 36vDC or 15vDC, Range 14.5, 30 or 90 degrees. ...
LSOC/P Gravity-Referenced Servo Inclinometer. Ranges ±1°, ±3°, ±14.5°, ±30° or ±90° . Power supply 12 to 18vDC, for a 5vDC output, or 20-30vDC, for a 4-20mA output. Options for solder pins or 6-way connector output. Operating temperature -18 to +70°C. ...
Laser Sighting Tool. This tool screws onto the front of the PyroCouple or PyroMini sensor and is used only during installation to aim the sensor at the required point. Activated by push button. ...
M31 Multiplexer for XR440 Pocket Loggers. Allows for up to 3 XR440 Pocket Loggers to be networked with one M31. Multiple M31 may be daisy-chained up to a maximum of 255 Pocket Loggers. Internal Lithium battery, average life 3 years. ...
Amplifier MA-UI with adjustable input ranges +/-10mV....+/-10V, +/-2mA...+/-200mA. Output 0-5v DC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
Amplifier MA-UNI with adjustable input ranges suitable for mV, Voltage, Current, Resistance (Thermocouple), Strain gauges, LVDTs and linear potentiometers. Output +/-5vDC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
Maestro M100 RS232/USB 3G Modem. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz. M100 modem comes with the Maestro SmartPack pre-loaded and includes auto baud-rate detection, auto TCP/UDP connection, self-healing network connection, industry specific protocols and many more features. ...
Maestro M100 RS232/USB 3G Modem Starter Kit includes: M100 RS232/USB 3G Mode; 12V Power Supply; DC Power Cable; 15/9 Serial Data Cable; and Magnetic Antenna. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz ...
MAG930 battery powered electromagnetic flowmeter, PN16 (PN10 above 200mm) with display unit to display rate & total (IP67), with USB Modbus communications, calibration and FlowAssistant configuration software, calibration certificate. Integral programmable data logger as standard. ...
MAL-FU Series miniature amplifier suitable for frequency input with ranges of 0-100Hz, 0-1kHz or 0 to 10kHz. Amplifier provides proportional 0-5vDC output with galvanic isolation. ...
MAL-I Series miniature amplifier suitable for input ranges of ±20mA. Amplifier provides a proportional ±5vDC output and 5vDC sensor supply with a 0.2% accuracy and selectable cut off frequencies of (2, 15, 340Hz) ...
Miniature Amplifiers for PT100 Input. Suitable for PT100 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT100 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: ...
Miniature Amplifiers for PT1000 Input. Suitable for PT1000 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT1000 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: ...
MAL-R1K Series miniature amplifier suitable for resistance input with ranges of 0-1,000 Ohms. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG2 Series miniature amplifier suitable for strain gauge input with ranges of ±2mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG5 Series miniature amplifier suitable for strain gauge input with ranges of ±5mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
LSI Series gravity referenced servo inclinometer, linearity 0.02% FRO, operating temperature -20 to +80°C, output 5vDC.Power supply 9 - 36vDC or 15vDC, Range 14.5, 30 or 90 degrees. ...
LSOC/P Inclinometer
LSOC/P Gravity-Referenced Servo Inclinometer. Ranges ±1°, ±3°, ±14.5°, ±30° or ±90° . Power supply 12 to 18vDC, for a 5vDC output, or 20-30vDC, for a 4-20mA output. Options for solder pins or 6-way connector output. Operating temperature -18 to +70°C. ...
LSTS
Laser Sighting Tool. This tool screws onto the front of the PyroCouple or PyroMini sensor and is used only during installation to aim the sensor at the required point. Activated by push button. ...
M12x1.5
M12 Cable gland with a 1.5mm thread. Cable Diameter range 3 to 6.5mm. Panel Hole 12mm. ...
M16x1.5
M16 Cable gland with a 1.5mm thread. Cable Diameter range 5 to 10mm. Panel Hole 16mm ...
M20x1.5
M20 Cable gland with a 1.5mm thread. Cable Diameter range 10 to 14mm. Panel Hole 20mm ...
M25x1.5
M16 Cable gland with a 1.5mm thread. Cable Diameter range 13 to 18mm. Panel Hole 25mm ...
M31
M31 Multiplexer for XR440 Pocket Loggers. Allows for up to 3 XR440 Pocket Loggers to be networked with one M31. Multiple M31 may be daisy-chained up to a maximum of 255 Pocket Loggers. Internal Lithium battery, average life 3 years. ...
MA-U
Amplifier MA-U with adjustable input ranges ±10mV, ±100mV, ±1V or ±10V. Output 0-5V or ±5V. With 10kHz bandwidth, it is ideal for dynamic signals. ...
MA-UI
Amplifier MA-UI with adjustable input ranges +/-10mV....+/-10V, +/-2mA...+/-200mA. Output 0-5v DC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
MA-UNI
Amplifier MA-UNI with adjustable input ranges suitable for mV, Voltage, Current, Resistance (Thermocouple), Strain gauges, LVDTs and linear potentiometers. Output +/-5vDC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
MAESTROM100
Maestro M100 RS232/USB 3G Modem. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz. M100 modem comes with the Maestro SmartPack pre-loaded and includes auto baud-rate detection, auto TCP/UDP connection, self-healing network connection, industry specific protocols and many more features. ...
MAESTROM100-KIT
Maestro M100 RS232/USB 3G Modem Starter Kit includes: M100 RS232/USB 3G Mode; 12V Power Supply; DC Power Cable; 15/9 Serial Data Cable; and Magnetic Antenna. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz ...
MAG930 Battery Operated Magnetic Flowmeter
MAG930 battery powered electromagnetic flowmeter, PN16 (PN10 above 200mm) with display unit to display rate & total (IP67), with USB Modbus communications, calibration and FlowAssistant configuration software, calibration certificate. Integral programmable data logger as standard. ...
MAL-FU
MAL-FU Series miniature amplifier suitable for frequency input with ranges of 0-100Hz, 0-1kHz or 0 to 10kHz. Amplifier provides proportional 0-5vDC output with galvanic isolation. ...
MAL-I20MA
MAL-I Series miniature amplifier suitable for input ranges of ±20mA. Amplifier provides a proportional ±5vDC output and 5vDC sensor supply with a 0.2% accuracy and selectable cut off frequencies of (2, 15, 340Hz) ...
MAL-ISO1
Galvanically isolating signal amplifier for input ranges +/-1v or 4-20mA, output +/- 5v, frequency range 0-160 Hz. ...
MAL-PT100
Miniature Amplifiers for PT100 Input. Suitable for PT100 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT100 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: 0.1% typical. Power Supply: 7.5 -15vDC @ 2mA. Dimensions: 33 x 20 x 15mm. Operating Temperature: -25 to +50°C. Module can be plugged into the ...
MAL-PT1000
Miniature Amplifiers for PT1000 Input. Suitable for PT1000 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT1000 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: 0.1% typical. Power Supply: 7.5 -15vDC @ 2mA. Dimensions: 33 x 20 x 15mm. Operating Temperature: -25 to +50°C. Module can be plugged into the ...
MAL-R1K
MAL-R1K Series miniature amplifier suitable for resistance input with ranges of 0-1,000 Ohms. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG2
MAL-SG2 Series miniature amplifier suitable for strain gauge input with ranges of ±2mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG5
MAL-SG5 Series miniature amplifier suitable for strain gauge input with ranges of ±5mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
LSI Series gravity referenced servo inclinometer, linearity 0.02% FRO, operating temperature -20 to +80°C, output 5vDC.Power supply 9 - 36vDC or 15vDC, Range 14.5, 30 or 90 degrees. ...
LSOC/P Gravity-Referenced Servo Inclinometer. Ranges ±1°, ±3°, ±14.5°, ±30° or ±90° . Power supply 12 to 18vDC, for a 5vDC output, or 20-30vDC, for a 4-20mA output. Options for solder pins or 6-way connector output. Operating temperature -18 to +70°C. ...
Laser Sighting Tool. This tool screws onto the front of the PyroCouple or PyroMini sensor and is used only during installation to aim the sensor at the required point. Activated by push button. ...
M31 Multiplexer for XR440 Pocket Loggers. Allows for up to 3 XR440 Pocket Loggers to be networked with one M31. Multiple M31 may be daisy-chained up to a maximum of 255 Pocket Loggers. Internal Lithium battery, average life 3 years. ...
Amplifier MA-UI with adjustable input ranges +/-10mV....+/-10V, +/-2mA...+/-200mA. Output 0-5v DC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
Amplifier MA-UNI with adjustable input ranges suitable for mV, Voltage, Current, Resistance (Thermocouple), Strain gauges, LVDTs and linear potentiometers. Output +/-5vDC. With 10kHz bandwidth, it is ideal for dynamic signals. ...
Maestro M100 RS232/USB 3G Modem. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz. M100 modem comes with the Maestro SmartPack pre-loaded and includes auto baud-rate detection, auto TCP/UDP connection, self-healing network connection, industry specific protocols and many more features. ...
Maestro M100 RS232/USB 3G Modem Starter Kit includes: M100 RS232/USB 3G Mode; 12V Power Supply; DC Power Cable; 15/9 Serial Data Cable; and Magnetic Antenna. GSM/GPRS/EDGE - Quadband Class 10 - Class 12. HSDPA 900/2100 Mhz ...
MAG930 battery powered electromagnetic flowmeter, PN16 (PN10 above 200mm) with display unit to display rate & total (IP67), with USB Modbus communications, calibration and FlowAssistant configuration software, calibration certificate. Integral programmable data logger as standard. ...
MAL-FU Series miniature amplifier suitable for frequency input with ranges of 0-100Hz, 0-1kHz or 0 to 10kHz. Amplifier provides proportional 0-5vDC output with galvanic isolation. ...
MAL-I Series miniature amplifier suitable for input ranges of ±20mA. Amplifier provides a proportional ±5vDC output and 5vDC sensor supply with a 0.2% accuracy and selectable cut off frequencies of (2, 15, 340Hz) ...
Miniature Amplifiers for PT100 Input. Suitable for PT100 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT100 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: ...
Miniature Amplifiers for PT1000 Input. Suitable for PT1000 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT1000 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy: ...
MAL-R1K Series miniature amplifier suitable for resistance input with ranges of 0-1,000 Ohms. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG2 Series miniature amplifier suitable for strain gauge input with ranges of ±2mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
MAL-SG5 Series miniature amplifier suitable for strain gauge input with ranges of ±5mV/V. Amplifier provides a 0-5vDC output with 5V sensor excitation. Accuracy 0.2% and cut off frequency of 1000Hz. ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
