PD 2 Docking Station
PD 2 Docking Station, lockable..
PD10L OEM Differential Pressure Transducer
Series 10L, Piezoresistive differential pressure transducer...
PG16
PG16 Cable gland. Cable Diameter range 9 to 14mm. Panel Hole 23mm...
PG21
PG21 Cable gland. Cable Diameter range 13 to 18mm. Panel Hole 28.3mm...
PG7
PG7 Cable gland. Cable Diameter range 2.5 to 6.5mm. Panel Hole 12.5mm...
CAB-5M-M12-CA3LD
Cable 5m with M12 Connector to Hirschmann CA3LD Connector..
PMCE
Extended sensing head cable (-MA models). Standard units are supplied with 1m of cable, max cable length 30m...
PMCEHT
Extended sensing head cable, high temperature (-HA and -JA models). Standard units are supplied with 1m of cable, max cable length 30m...
POSITECTOR-200B/ADV
PosiTector 200 Series, model Advanced B. Measures total thickness of polymer coatings on wood, plastics, etc, thickness ranges between 13-1000 microns (0.5 - 40 mils). The unit will measure up to 3 individual layers min 13 microns. Also features a graphical readout for detailed analysis of the coatings. Each unit..
POSITECTOR-200B/STD
PosiTector 200 Series, model Standard B. Measures total thickness of polymer coatings on wood, plastics, etc, thickness ranges between 13-1000 microns (0.5 - 40 mils). Each unit comes complete with probe, precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, nylon carrying case with shoulder strap,..
POSITECTOR-200C/ADV
PosiTector 200 Series, model Standard C. Measures total thickness of thicker coatings on concrete, fibreglass, etc, thickness ranges between 50-3800 microns (2 - 150 mils). The unit will measure up to 3 individual layers min 13 microns. Also features a graphical readout for detailed analysis of the coatings. Each unit..
POSITECTOR-200C/STD
PosiTector 200 Series, model Standard C. Measures total thickness of thicker coatings on concrete, fibreglass, etc, thickness ranges between 50-3800 microns (2 - 150 mils). Each unit comes complete with probe, precision plastic shims, protective rubber holster with belt clip, 3 AAA batteries, instructions, nylon carrying case with shoulder strap,..
POW12V
12v sensor supply board..
POW24V
24v sensor supply board..
PR36XWEI
PR36XW Ei Intrinsically safe submersible pressure transmitter. ranges 0-1, 0-3, 0-10, 0-30 metres WG..
PS1100 Infrared CO2 Detector.
The PS1100 is a portable gas detector for the detection of Carbon Dioxide (CO2). The PS1100 is equipped with an infra-red cell to provide reliable, accurate and stable CO2 readings with a range of 0-3% vol, 15 second response time and an accuracy of 3% of reading or 0.02% vol...
PS1100-03
PS1100 portable gas detector for Carbon Dioxide (CO2). Measurement range of 0-3% vol, 15 second response time and an accuracy of 3% of reading or 0.02% vol. Alarms: Audible 80dB, 5 step LED bar graph displaying hazard level. Lightweight (135g), ABS housing, dimensions 125 x 52 x 32mm. Operating temperature..
PS24-12V/0.5A
100~240V AC to 12V DC Power Supply..
PT100 Sensor with 1/2″ BSP Thread
RTD Sensor in 304 Stainless Steel (316 on request). 6mm diameter and 100mm length probe. Connection thread is 1/2" BSP male thread and the probe comes with 2m PVC flying lead. Operating and measurement temperature range of -50 to 100°C..
PT907
PT907 low cost temperature sensor with an epoxy tip and PVC insulated leads. Probe dimensions: 0.127" (3.23mm) diameter, 0.37" (9.4mm) long and 4 feet (1.2m) cable. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C Response time: 2.5 Seconds..
PT916-12
PT916 temperature sensor with a closed end 1/8 inch diameter, 12" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
PT916-4
PT916 temperature sensor with a closed end 1/8 inch diameter, 4" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
PT916-6
PT916 temperature sensor with a closed end 1/8 inch diameter, 6" long Stainless Steel tube and 3 feet (0.9m) Teflon insulated leads. Temperature Range: -50 to 75 C. Accuracy: 0.15 C from 0-40 C and 0.3 C from -25 to +85 C. Response time: 3.0 Seconds in stirred oil bath...
