omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Parts Builder

Edit Content
PA600-LR Series Low Range Pressure Sensors

PA600-LR Low Range Industrial Pressure Transmitters

The PA600-LR series of low range pressure sensors are suitable for measuring mBar pressures in gas and liquid media across a wide range of general purpose and industrial applications. The standard the PA600-LR comes with: Viton O-ring, 303 stainless steel case, 316L Stainless Steel diaphragm with Silicon-based sensing element and ...
View Product

PTM/N Programmable Submersible Depth Sensor

The PTM/N level transmitter is a programmable depth sensor available with a scalable 4-20mA analogue output. The unit can be supplied preprogrammed to your specific requirements, or with the optional programming kit to allow the unit to be re-ranged by the user. The range is adjustable up to 1:4 of ...
View Product
Senturion XPR02 Proximity Probe

Senturion XPR02 Proximity Probe

The Senturion XPR02 proximity probe system is a 5mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm with resolution of less than 1 micrometer. It is designed for tight installation and harsh environments (up to 180°C). The system includes a driver unit with a ...
View Product

SGR510 TorqSense Transducer

SGR510 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR510 will provide readings for Torque Only with a fixed analogue current or voltage output with a power supply 12-32vDC. Select Options to build your ...
View Product

SGR511 TorqSense Transducer

SGR511 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR511 will provide readings for Torque, Speed and Power with 60 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply ...
View Product

SGR512 TorqSense Transducer

SGR512 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR513 will provide readings for Torque, Speed and Power with 360 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply ...
View Product

SGR520 TorqSense Transducer

SGR520 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR520 can provide readings for Torque Only with a variable analogue current or voltage output with a power supply 12-32vDC. Select Options ...
View Product

SGR521 TorqSense Transducer

SGR521 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR521 can provide readings for Torque, Speed and Power with 60 pulse per revolution encoder with variable analogue current or voltage outputs with a power ...
View Product

SGR522 TorqSense Transducer

SGR522 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR522 can provide readings for Torque, Speed/Angle and Power with 360 pulse per revolution encoder with up to 3 variable analogue current ...
View Product
SGR Series Torque Transducers with External Electronics

SGR530 TorqSense Transducer

SGR530 Part Builder

SGR530 TorqSense Transducer for Torque Measurements with External Electronics and Fixed Analogue Outputs.
...
View Product
SGR Series Torque Transducers with External Electronics

SGR531 TorqSense Transducer

SGR531 Part Builder

SGR531 TorqSense Transducer with a fixed analogue outputs for torque and RPM measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm.
...
View Product
SGR Series Torque Transducers with External Electronics

SGR532 TorqSense Transducer

SGR532 Part Builder

SGR532 TorqSense Transducer with variable analogue outputs for Torque, Speed and Power measurements with integral electronics. Torque ranges from 0-175mNm to 0-13,000 Nm and 360 Pulse/Revolution.
...
View Product
SRD-99 Data Logger

SRD-99 Data Logger Display Unit

The SRD-99 data logger is designed to record signal inputs and display current values in graphs and numeric form. The SRD-99 is equipped with 1, 4 or 8 input channels, suitable for either temperature (RTD or Thermocouples) or analogue (0/4-20mA or 0-10V) inputs across all available channels. A pulse (digital) ...
View Product
AKF390 3-Axis Accelerometer with 0-5V Output

Three Axis Accelerometers with an Analogue Output.

The AKF390B is a 3-Axis accelerometer with an analogue 0-5V or 4-20mA output. The unit is designed with patented Swiss technology and is widely used in vibration and impact testing, plus various other applications. The AKF390B uses a monocrystalline silicon capacitive sensor, micromachined silicon chip, microprocessor and integrated temperature sensor. ...
View Product

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
View Product

1400 Peli Case

The 1400 Peli case is a small-medium protective carry case which is IP67 rated and can be supplied with the Pick N Pluck foam insert. Cases are available in black, orange or yellow with standard interior dimensions of 306L x 234W x 130H. The 1400 is suitable for use with ...
View Product

DBBSM S Beam – Bi-directional Load Cell

The DBBSM series loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers ...
View Product
Safsonic Fixed Doppler Flow Meter

DFM2 Fixed Ultrasonic Doppler Flow Meter

The DFM2 is a microprocessor-controlled flow meter for the measurement and control of liquids flowing through process and effluent pipelines using the non-intrusive Doppler principle. The flow meter display indicates flow rate and total volume for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and ...
View Product

Keller PD39X Series Differential Pressure Transmitter

The Keller PD39X series differential pressure transducer is designed to indirectly measure differential pressure by using two absolute pressure sensors providing a more robust sensor in relation to unbalanced pressures that transducers using a single sensor. Differential pressure ranges between 0-3 and 0-300 bar are available with output signal options ...
View Product

Keller Series 7L Miniature OEM Pressure Transducer

The 7L Series are miniature pressure transducer with a robust stainless steel housing for optimum long-term stability for a wide range of OEM applications. The transducers includes a robust and corrosion-resistant front-flush crevice-free welded diaphragm and a piezoresistive pressure sensor, which is made from Silicon, separated from the measured medium. ...
View Product
MSR145 Mini Data Logger

MSR145 Mini Data Logger

The MSR145 Mini Data Logger is a miniature universal data logger with options for monitoring temperature, humidity, pressure, 3-axis accelerometer (X, Y and Z axes) and light sensors with internal and external sensors. The units are available in a selection of housings and have an internal rechargeable battery. Additionally, the ...
View Product
MTN/1187 RMS Acceleration Sensor

MTN/1187 RMS Acceleration Sensor with 4-20mA Output

The MTN/1187 is a general purpose, top-entry acceleration sensor with a 4-20mA output of the RMS acceleration values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral ...
View Product

P501 Miniature Rotary Sensor

The P501 RIPS (Rotary Inductive Position Sensor) suitable for OEM applications. Each unit is supplied with the output calibrated to the angle required by the customer, between 30 and 140 degrees. It is particularly suitable for OEMs seeking good sensor performance for arduous applications where space is important. ...
View Product
PA600 Series Pressure Sensors

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but ...
View Product
Edit Content
PA600-LR Series Low Range Pressure Sensors

PA600-LR Low Range Industrial Pressure Transmitters

The PA600-LR series of low range pressure sensors are suitable for measuring mBar pressures in gas and liquid media across a wide range of general purpose and industrial applications. The standard the PA600-LR comes with: Viton O-ring, 303 stainless steel case, 316L Stainless Steel diaphragm with Silicon-based sensing element and a ¼"BSP male process connection, but various standard options are available. The PA600-LR series provides a wide choice of electrical outputs from its ASIC-based amplifier ...
Select options

PTM/N Programmable Submersible Depth Sensor

The PTM/N level transmitter is a programmable depth sensor available with a scalable 4-20mA analogue output. The unit can be supplied preprogrammed to your specific requirements, or with the optional programming kit to allow the unit to be re-ranged by the user. The range is adjustable up to 1:4 of the nominal range of the sensor. The unit is suitable for a water depth from 1m up to 250m and has various options for cabling, ...
Select options
Senturion XPR02 Proximity Probe

Senturion XPR02 Proximity Probe

The Senturion XPR02 proximity probe system is a 5mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm with resolution of less than 1 micrometer. It is designed for tight installation and harsh environments (up to 180°C). The system includes a driver unit with a 5, 7, or 9m extension cable. The cable system incorporates snap lock connectors and double screened cable for easy installation and high immunity to interference. ...
Read more

SGR510 TorqSense Transducer

SGR510 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR510 will provide readings for Torque Only with a fixed analogue current or voltage output with a power supply 12-32vDC. Select Options to build your own the SGR510 on our Part Builder.
...
Select options

SGR511 TorqSense Transducer

SGR511 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR511 will provide readings for Torque, Speed and Power with 60 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply 12-32vDC. Select Options to build your own the SGR511 on our Part Builder.
...
Select options

SGR512 TorqSense Transducer

SGR512 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR513 will provide readings for Torque, Speed and Power with 360 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply 12-32vDC. Select Options to build your own the SGR512 on our Part Builder.
...
Select options

SGR520 TorqSense Transducer

SGR520 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR520 can provide readings for Torque Only with a variable analogue current or voltage output with a power supply 12-32vDC. Select Options to build your own the SGR520 on our Part Builder.
...
Select options

SGR521 TorqSense Transducer

SGR521 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR521 can provide readings for Torque, Speed and Power with 60 pulse per revolution encoder with variable analogue current or voltage outputs with a power supply 12-32vDC. Select Options to build your own the SGR521 on our Part Builder.
...
Select options

SGR522 TorqSense Transducer

SGR522 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR522 can provide readings for Torque, Speed/Angle and Power with 360 pulse per revolution encoder with up to 3 variable analogue current or voltage outputs with a power supply 12-32vDC. Select Options to build your own the SGR522 on our Part Builder.
...
Select options
SGR Series Torque Transducers with External Electronics

SGR530 TorqSense Transducer

SGR530 Part Builder

SGR530 TorqSense Transducer for Torque Measurements with External Electronics and Fixed Analogue Outputs.
...
Select options
SGR Series Torque Transducers with External Electronics

SGR531 TorqSense Transducer

SGR531 Part Builder

SGR531 TorqSense Transducer with a fixed analogue outputs for torque and RPM measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm.
...
Select options
SGR Series Torque Transducers with External Electronics

SGR532 TorqSense Transducer

SGR532 Part Builder

SGR532 TorqSense Transducer with variable analogue outputs for Torque, Speed and Power measurements with integral electronics. Torque ranges from 0-175mNm to 0-13,000 Nm and 360 Pulse/Revolution.
...
Select options
SRD-99 Data Logger

SRD-99 Data Logger Display Unit

The SRD-99 data logger is designed to record signal inputs and display current values in graphs and numeric form. The SRD-99 is equipped with 1, 4 or 8 input channels, suitable for either temperature (RTD or Thermocouples) or analogue (0/4-20mA or 0-10V) inputs across all available channels. A pulse (digital) input for controlling the recording process and 2 relay alarm outputs driven by single or group of channels with individually adjustable thresholds for each channel. ...
Select options
AKF390 3-Axis Accelerometer with 0-5V Output

Three Axis Accelerometers with an Analogue Output.

The AKF390B is a 3-Axis accelerometer with an analogue 0-5V or 4-20mA output. The unit is designed with patented Swiss technology and is widely used in vibration and impact testing, plus various other applications. The AKF390B uses a monocrystalline silicon capacitive sensor, micromachined silicon chip, microprocessor and integrated temperature sensor. Power supply 9-36V, low power consumption 60mA @ 12V. ...
Select options

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
Select options

1400 Peli Case

The 1400 Peli case is a small-medium protective carry case which is IP67 rated and can be supplied with the Pick N Pluck foam insert. Cases are available in black, orange or yellow with standard interior dimensions of 306L x 234W x 130H. The 1400 is suitable for use with the SQ2010, GL220/900 or DT82 data loggers. Omni Instruments can also customise your peli case by fitting it with Hirschmann connectors, cable glands, internal batteries ...
Select options

DBBSM S Beam – Bi-directional Load Cell

The DBBSM series loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ...
Select options
Safsonic Fixed Doppler Flow Meter

DFM2 Fixed Ultrasonic Doppler Flow Meter

The DFM2 is a microprocessor-controlled flow meter for the measurement and control of liquids flowing through process and effluent pipelines using the non-intrusive Doppler principle. The flow meter display indicates flow rate and total volume for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and sludges. The Safsonic DFM2 requires fluids with a minimum concentration of 100 ppm of solids or bubbles having minimum size of 100 microns. The unit ...
Read more

Keller PD39X Series Differential Pressure Transmitter

The Keller PD39X series differential pressure transducer is designed to indirectly measure differential pressure by using two absolute pressure sensors providing a more robust sensor in relation to unbalanced pressures that transducers using a single sensor. Differential pressure ranges between 0-3 and 0-300 bar are available with output signal options of 4-20mA and 0-10V. These units also have an RS485 output in addition to the standard analogue outputs. Typical error band ≤0,05 %FS typ. (linearity, ...
Select options

Keller Series 7L Miniature OEM Pressure Transducer

The 7L Series are miniature pressure transducer with a robust stainless steel housing for optimum long-term stability for a wide range of OEM applications. The transducers includes a robust and corrosion-resistant front-flush crevice-free welded diaphragm and a piezoresistive pressure sensor, which is made from Silicon, separated from the measured medium. Transducers are available with Stainless Steel, or Titanium for operating pressures up to 200 Bar and temperature for up to 125°C. Low power consumption: 1mA ...
Select options
MSR145 Mini Data Logger

MSR145 Mini Data Logger

The MSR145 Mini Data Logger is a miniature universal data logger with options for monitoring temperature, humidity, pressure, 3-axis accelerometer (X, Y and Z axes) and light sensors with internal and external sensors. The units are available in a selection of housings and have an internal rechargeable battery. Additionally, the MSR145 can be fitted with dual or quad analogue input module to allow the connection of third party sensors and the housings allow for the ...
Select options
MTN/1187 RMS Acceleration Sensor

MTN/1187 RMS Acceleration Sensor with 4-20mA Output

The MTN/1187 is a general purpose, top-entry acceleration sensor with a 4-20mA output of the RMS acceleration values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral stainless steel overbraided ETFE or heavy duty PU cable. Mounting options include a quick fit, 1/4" UNF or various mounting adapters to standard mounting threads. ...
Select options

P501 Miniature Rotary Sensor

The P501 RIPS (Rotary Inductive Position Sensor) suitable for OEM applications. Each unit is supplied with the output calibrated to the angle required by the customer, between 30 and 140 degrees. It is particularly suitable for OEMs seeking good sensor performance for arduous applications where space is important. ...
Read more
PA600 Series Pressure Sensors

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but various standard options are available. The PA600 series provides a wide choice of electrical outputs from its ASIC-based amplifier circuit, these include 4-20mA, 0-5V, 0-10V, ...
Select options
PA600-LR Series Low Range Pressure Sensors

PA600-LR Low Range Industrial Pressure Transmitters

The PA600-LR series of low range pressure sensors are suitable for measuring mBar pressures in gas and liquid media across a wide range of general purpose and industrial applications. The standard the PA600-LR comes with: Viton O-ring, 303 stainless steel case, 316L Stainless Steel diaphragm with Silicon-based sensing element and ...
View Product

PTM/N Programmable Submersible Depth Sensor

The PTM/N level transmitter is a programmable depth sensor available with a scalable 4-20mA analogue output. The unit can be supplied preprogrammed to your specific requirements, or with the optional programming kit to allow the unit to be re-ranged by the user. The range is adjustable up to 1:4 of ...
View Product
Senturion XPR02 Proximity Probe

Senturion XPR02 Proximity Probe

The Senturion XPR02 proximity probe system is a 5mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm with resolution of less than 1 micrometer. It is designed for tight installation and harsh environments (up to 180°C). The system includes a driver unit with a ...
View Product

SGR510 TorqSense Transducer

SGR510 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR510 will provide readings for Torque Only with a fixed analogue current or voltage output with a power supply 12-32vDC. Select Options to build your ...
View Product

SGR511 TorqSense Transducer

SGR511 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR511 will provide readings for Torque, Speed and Power with 60 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply ...
View Product

SGR512 TorqSense Transducer

SGR512 TorqSense Transducer for Torque Measurements with Internal Electronics and Fixed Analogue Outputs. SGR513 will provide readings for Torque, Speed and Power with 360 pulse per revolution encoder. Fixed analogue current or voltage outputs with a power supply ...
View Product

SGR520 TorqSense Transducer

SGR520 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR520 can provide readings for Torque Only with a variable analogue current or voltage output with a power supply 12-32vDC. Select Options ...
View Product

SGR521 TorqSense Transducer

SGR521 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR521 can provide readings for Torque, Speed and Power with 60 pulse per revolution encoder with variable analogue current or voltage outputs with a power ...
View Product

SGR522 TorqSense Transducer

SGR522 TorqSense Transducer for Torque Measurements with Internal Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR522 can provide readings for Torque, Speed/Angle and Power with 360 pulse per revolution encoder with up to 3 variable analogue current ...
View Product
SGR Series Torque Transducers with External Electronics

SGR530 TorqSense Transducer

SGR530 Part Builder

SGR530 TorqSense Transducer for Torque Measurements with External Electronics and Fixed Analogue Outputs.
...
View Product
SGR Series Torque Transducers with External Electronics

SGR531 TorqSense Transducer

SGR531 Part Builder

SGR531 TorqSense Transducer with a fixed analogue outputs for torque and RPM measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm.
...
View Product
SGR Series Torque Transducers with External Electronics

SGR532 TorqSense Transducer

SGR532 Part Builder

SGR532 TorqSense Transducer with variable analogue outputs for Torque, Speed and Power measurements with integral electronics. Torque ranges from 0-175mNm to 0-13,000 Nm and 360 Pulse/Revolution.
...
View Product
SRD-99 Data Logger

SRD-99 Data Logger Display Unit

The SRD-99 data logger is designed to record signal inputs and display current values in graphs and numeric form. The SRD-99 is equipped with 1, 4 or 8 input channels, suitable for either temperature (RTD or Thermocouples) or analogue (0/4-20mA or 0-10V) inputs across all available channels. A pulse (digital) ...
View Product
AKF390 3-Axis Accelerometer with 0-5V Output

Three Axis Accelerometers with an Analogue Output.

The AKF390B is a 3-Axis accelerometer with an analogue 0-5V or 4-20mA output. The unit is designed with patented Swiss technology and is widely used in vibration and impact testing, plus various other applications. The AKF390B uses a monocrystalline silicon capacitive sensor, micromachined silicon chip, microprocessor and integrated temperature sensor. ...
View Product

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
View Product

1400 Peli Case

The 1400 Peli case is a small-medium protective carry case which is IP67 rated and can be supplied with the Pick N Pluck foam insert. Cases are available in black, orange or yellow with standard interior dimensions of 306L x 234W x 130H. The 1400 is suitable for use with ...
View Product

DBBSM S Beam – Bi-directional Load Cell

The DBBSM series loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers ...
View Product
Safsonic Fixed Doppler Flow Meter

DFM2 Fixed Ultrasonic Doppler Flow Meter

The DFM2 is a microprocessor-controlled flow meter for the measurement and control of liquids flowing through process and effluent pipelines using the non-intrusive Doppler principle. The flow meter display indicates flow rate and total volume for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and ...
View Product

Keller PD39X Series Differential Pressure Transmitter

The Keller PD39X series differential pressure transducer is designed to indirectly measure differential pressure by using two absolute pressure sensors providing a more robust sensor in relation to unbalanced pressures that transducers using a single sensor. Differential pressure ranges between 0-3 and 0-300 bar are available with output signal options ...
View Product

Keller Series 7L Miniature OEM Pressure Transducer

The 7L Series are miniature pressure transducer with a robust stainless steel housing for optimum long-term stability for a wide range of OEM applications. The transducers includes a robust and corrosion-resistant front-flush crevice-free welded diaphragm and a piezoresistive pressure sensor, which is made from Silicon, separated from the measured medium. ...
View Product
MSR145 Mini Data Logger

MSR145 Mini Data Logger

The MSR145 Mini Data Logger is a miniature universal data logger with options for monitoring temperature, humidity, pressure, 3-axis accelerometer (X, Y and Z axes) and light sensors with internal and external sensors. The units are available in a selection of housings and have an internal rechargeable battery. Additionally, the ...
View Product
MTN/1187 RMS Acceleration Sensor

MTN/1187 RMS Acceleration Sensor with 4-20mA Output

The MTN/1187 is a general purpose, top-entry acceleration sensor with a 4-20mA output of the RMS acceleration values. Sensors are constructed of stainless steel throughout for a robust sensor suitable for continuous vibration monitoring, even in harsh environments. Electrical connection options include a 3-pin 62GB connector, 2-pin MS connector, integral ...
View Product

P501 Miniature Rotary Sensor

The P501 RIPS (Rotary Inductive Position Sensor) suitable for OEM applications. Each unit is supplied with the output calibrated to the angle required by the customer, between 30 and 140 degrees. It is particularly suitable for OEMs seeking good sensor performance for arduous applications where space is important. ...
View Product
PA600 Series Pressure Sensors

PA600 Series Standard Industrial Pressure Transducers and Transmitters

The PA600 series of industrial pressure sensors are suitable for measuring gas and liquid pressures across a wide range of general purpose and industrial applications. The standard the PA600 comes with: Viton O-ring, 303 stainless steel case, ceramic diaphragm (96% Aluminium Oxide Al2O3) and a ¼"BSP male process connection, but ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now