omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Need Help?

Specialist Load Cells

Custom designed load cells designed for specific purposes. These include: brake pedal load cells for monitoring the force applied under braking; Load pins for marine or other off-shore applications; and miniature load cells where space is restricted.

CCG Annular Force Washer – Compression Load Cell

The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring..
View Product
CCGBP Brake Pedal Compression Load Cell

CCGBP Series – Brake Pedal Load Cell

The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly..
View Product

DBEP Load Pin – Compression Load Cell

The DBEP shear pin load cells are designed for the measurement of both tension and compression forces in general applications such as process monitoring, offshore, civil engineering and industrial applications. They are environmentally sealed to IP67 as standard but can be enhanced to IP68 for fully submersible applications in sea..
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product

CCG Annular Force Washer – Compression Load Cell

The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring continuously, or periodically, the tension profile of bolts during their use in the installation. The CCG load cell can also be used in cable tension ...
View Product
CCGBP Brake Pedal Compression Load Cell

CCGBP Series – Brake Pedal Load Cell

The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly onto the pedal, with customised mounting options available for any vehicle. Ranges 50 to 200Kg. Standard output is 2mV/V with options for inline amplifiers for ...
View Product

DBEP Load Pin – Compression Load Cell

The DBEP shear pin load cells are designed for the measurement of both tension and compression forces in general applications such as process monitoring, offshore, civil engineering and industrial applications. They are environmentally sealed to IP67 as standard but can be enhanced to IP68 for fully submersible applications in sea water of 6500 metres or more. Load cells are available with a bi-directional range of 2.5 tonnes up to 50 tonnes with a standard 1-1.5mV/V ...
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65. ...
View Product

Custom designed load cells designed for specific purposes. These include: brake pedal load cells for monitoring the force applied under braking; Load pins for marine or other off-shore applications; and miniature load cells where space is restricted.

CCG Annular Force Washer – Compression Load Cell

The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring..
View Product
CCGBP Brake Pedal Compression Load Cell

CCGBP Series – Brake Pedal Load Cell

The CCGBP load cell is a very low profile load cell designed for the measurement of brake pedal compressive forces. At just 12.5mm high, the CCGBP load cell is small enough to fit in the tightest spaces. The integral mounting and loading plate allows for fast and simple fitting directly..
View Product

DBEP Load Pin – Compression Load Cell

The DBEP shear pin load cells are designed for the measurement of both tension and compression forces in general applications such as process monitoring, offshore, civil engineering and industrial applications. They are environmentally sealed to IP67 as standard but can be enhanced to IP68 for fully submersible applications in sea..
View Product

DBBSS/TSF Torque & Tension Load Cell

Stainless Steel combined Torque and Axial Forces Load Cell. Ranges 1kN to 250kN, output 1.5mV/V to 3.0mV/V (refer to datasheet), accuracy 0.05%, sealed to IP65...
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now