omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Fixed Gas Sensors for Toxic and Flammable gases

Edit Content

OLCT100 Fixed Gas Detector

Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe ...
View Product

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
View Product

OLCT60 Fixed Gas Detector with Display

The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available ...
View Product
DG-TT7-S Solid-State (MOS) Gas Detector

DG7 Series Intelligent Gas Detectors

The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7 ...
View Product

OLC(T)10 EXPLO Gas Detectors for Explosive Gases

The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line ...
View Product
OLCT10 Toxic & Refrigerant Gas Detector

OLCT10 Gas Detectors for Refrigerant and Toxic Gases

The OLCT10 TOX gas detectors are designed for commercial applications for the detection of refrigerant gases and the presence of exhaust gases from combustion in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses. ...
View Product

OLCT10N Fixed Digital Gas Detectors

The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These ...
View Product

CTX300 Gas Detector for Non-Hazardous Areas

The CTX300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for ...
View Product
Quasar 900 Open Path Gas Detectors

SafEye Quasar 900 Open Path Combustible Hydrocarbon Gas Detector

The New SafEye Quasar 900 is an open path detection system which provides continuous monitoring for combustible hydrocarbon gases. It employs spectral "fingerprint" analysis of the atmosphere between a transmitter and detector unit to determine the levels of the Hydrocarbon gas present using the Differential Optical Absorption Spectroscopy (DOAS) technique. ...
View Product
GS-CO2-xx-S-UN CO2 Transmitters

GS-CO2 Space Mounted CO2 Transmitters

The GS-CO2 is a non-dispersive infrared sensor for measuring CO2 concentrations in controlled spaces. The GS-CO2-S is designed for use in indoor spaces to monitoring Carbon Dioxide levels using a microprocessor based electronics and a unique self calibration algorithm to improve long term stability and accuracy. It is ideal to ...
View Product
Edit Content

OLCT100 Fixed Gas Detector

Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe environmental conditions, where the presence of poisons could harm the use of catalytic sensors. The unit is also SIL 2 certified Hazardous Area Approved ...
Select options

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
Select options

OLCT60 Fixed Gas Detector with Display

The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available as explosion-proof XP or intrinsically safe IS sensors and can be used remotely to provide detection in Zone 0. The detector units are IP66 and ...
Read more
DG-TT7-S Solid-State (MOS) Gas Detector

DG7 Series Intelligent Gas Detectors

The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7 utilizes dual OXYCOL catalytic sensors. These microprocessor-driven detectors are easily configured via a wireless hand-held terminal (TLU) or a hard-wired HART option, allowing for flexible ...
Read more

OLC(T)10 EXPLO Gas Detectors for Explosive Gases

The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line to allow two detectors to connect back to the one controller channel. These detectors provide a wheatstone bridge or 4-20mA output. The OLCT10 detectors can ...
Add to basket
OLCT10 Toxic & Refrigerant Gas Detector

OLCT10 Gas Detectors for Refrigerant and Toxic Gases

The OLCT10 TOX gas detectors are designed for commercial applications for the detection of refrigerant gases and the presence of exhaust gases from combustion in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses. Up to 5 OLCT10 TOX units can be networked in a single line to cover the same gas. These detectors provide a 4-20mA output that ...
Add to basket

OLCT10N Fixed Digital Gas Detectors

The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These detectors provide an RS485 Modbus output, allowing a fast and accurate response. ...
Add to basket

CTX300 Gas Detector for Non-Hazardous Areas

The CTX300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for maintenance by a single person. Units provide a 4-20mA output for the gas levels detected and an optional display can be incorporated. ...
Read more
Quasar 900 Open Path Gas Detectors

SafEye Quasar 900 Open Path Combustible Hydrocarbon Gas Detector

The New SafEye Quasar 900 is an open path detection system which provides continuous monitoring for combustible hydrocarbon gases. It employs spectral "fingerprint" analysis of the atmosphere between a transmitter and detector unit to determine the levels of the Hydrocarbon gas present using the Differential Optical Absorption Spectroscopy (DOAS) technique. The Xenon Flash Infrared transmitter and receiver units can be separated over a line of sight from 7m up to 200m. The Quasar 900 transmitter ...
Add to basket
GS-CO2-xx-S-UN CO2 Transmitters

GS-CO2 Space Mounted CO2 Transmitters

The GS-CO2 is a non-dispersive infrared sensor for measuring CO2 concentrations in controlled spaces. The GS-CO2-S is designed for use in indoor spaces to monitoring Carbon Dioxide levels using a microprocessor based electronics and a unique self calibration algorithm to improve long term stability and accuracy. It is ideal to ensure adequate ventilation while maximizing energy savings by ventilating at the optimum level. Units are also available with integrated temperature and relative humidity sensors to ...
Add to basket

OLCT100 Fixed Gas Detector

Designed for the detection of explosive gases, toxic gases or oxygen, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and available in explosion safe or intrinsically safe versions. In addition, infrared sensors are also available for more severe ...
View Product

OLCT100 Fixed Gas Detector for Refrigerant Gases

Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved ...
View Product

OLCT60 Fixed Gas Detector with Display

The OLCT60 is a new high quality industrial fixed gas detector suitable for a wide range of industrial applications for the detection of flammable, toxic gases or Oxygen. The transmitters has a digital display and will provide a 4-20mA output. The detectors are ATEX approved, SIL 2 certified and available ...
View Product
DG-TT7-S Solid-State (MOS) Gas Detector

DG7 Series Intelligent Gas Detectors

The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7 ...
View Product

OLC(T)10 EXPLO Gas Detectors for Explosive Gases

The OLC(T)10 Flammable gas detectors are designed for commercial applications and units are available for safe area and hazardous area applications. These detectors are ideal for the continuous monitoring of flammable gases present in car parks or boiler rooms. the OLC10 TWIN units can be connected in a single line ...
View Product
OLCT10 Toxic & Refrigerant Gas Detector

OLCT10 Gas Detectors for Refrigerant and Toxic Gases

The OLCT10 TOX gas detectors are designed for commercial applications for the detection of refrigerant gases and the presence of exhaust gases from combustion in ambient air. These detectors are ideal for the continuous monitoring of toxic gases in car parks, boiler rooms and plant rooms for shops and warehouses. ...
View Product

OLCT10N Fixed Digital Gas Detectors

The OLCT10N gas detectors are designed for common gases in commercial and light industrial applications. These detectors are ideal for use in combination with the MX16, MX32 or MX43 gas controllers. Up to 32 OLCT10N detectors can be connected on a same digital line or distributed on 8 lines. These ...
View Product

CTX300 Gas Detector for Non-Hazardous Areas

The CTX300 gas detector is designed with a robust polycarbonate housing for gas detection in safe areas of Oxygen, Carbon Dioxide, Toxic and refrigerant gases. The polycarbonate housing is very durable and is not affected by harsh environments. The CTX 300 comes equipped with pre-calibrated sensor units and allows for ...
View Product
Quasar 900 Open Path Gas Detectors

SafEye Quasar 900 Open Path Combustible Hydrocarbon Gas Detector

The New SafEye Quasar 900 is an open path detection system which provides continuous monitoring for combustible hydrocarbon gases. It employs spectral "fingerprint" analysis of the atmosphere between a transmitter and detector unit to determine the levels of the Hydrocarbon gas present using the Differential Optical Absorption Spectroscopy (DOAS) technique. ...
View Product
GS-CO2-xx-S-UN CO2 Transmitters

GS-CO2 Space Mounted CO2 Transmitters

The GS-CO2 is a non-dispersive infrared sensor for measuring CO2 concentrations in controlled spaces. The GS-CO2-S is designed for use in indoor spaces to monitoring Carbon Dioxide levels using a microprocessor based electronics and a unique self calibration algorithm to improve long term stability and accuracy. It is ideal to ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now