omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Need Help?

DIN-Rail Mounted Temperature Transmitters

DIN rail-mounted temperature transmitters are designed for installation on standard DIN rails within control cabinets and electrical panels. These devices are typically used when multiple transmitters need to be housed in a centralized location, often alongside other control equipment. Their robust, modular design allows for a high density of instruments in a limited space, simplifying wiring and maintenance. By bringing the sensor wiring from the field into the panel, these transmitters provide a secure and organized solution for signal conversion, making them a cornerstone of any modern industrial automation system.

PR3100 Slim Series Temperature Isolators

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and..
View Product
PR3300 Series Temperature Converters

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART..
View Product

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved..
View Product

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail...
View Product

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit..
View Product

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can..
View Product

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on..
View Product

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors..
View Product

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant..
View Product

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC..
View Product
PR3100 Slim Series Temperature Isolators

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units. ...
View Product
PR3300 Series Temperature Converters

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART 7 protocol unit that allow for integrating PT100 and thermocouples into a HART system. HART 7 revision protocol allows for extended programming. All units are ...
View Product

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved ...
View Product

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
View Product

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions. ...
View Product

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
View Product

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can accept single or dual channel inputs with the option of intrinsically safe versions and galvanic isolation. ...
View Product

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors and provide a 4-20mA output with individual, difference or average temperature measurements. The unit requires a 8 to 35vDC power supply and can be mounted ...
View Product

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant ...
View Product

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC by RS-232 port. The units also accept, 0-50mV, 0-10v, 0-20mA and 4-20mA input signals and can be used as signal amplifiers or isolators. ...
View Product

DIN rail-mounted temperature transmitters are designed for installation on standard DIN rails within control cabinets and electrical panels. These devices are typically used when multiple transmitters need to be housed in a centralized location, often alongside other control equipment. Their robust, modular design allows for a high density of instruments in a limited space, simplifying wiring and maintenance. By bringing the sensor wiring from the field into the panel, these transmitters provide a secure and organized solution for signal conversion, making them a cornerstone of any modern industrial automation system.

PR3100 Slim Series Temperature Isolators

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and..
View Product
PR3300 Series Temperature Converters

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART..
View Product

5131 2-Wire Programmable Transmitter

The 5131 is a 2-wire programmable transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The transmitter converts the input into a 4-20mA output that is proportional and linear to the value of the input. Hazardous Area Approved..
View Product

6331 2-Wire Programmable Transmitter

The 6331 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100, TC, ohm or bipolar mV signals. The transmitters converts the inputs into 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail...
View Product

6333 2-Wire Programmable Transmitter

The 6333 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for PT100/PT1000, Ni100 or Ohm inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit..
View Product

6334 2-Wire Programmable Transmitter

The 6334 is an extremely high accuracy DIN Rail mounting programmable transmitters suitable for TC or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 7.2 to 35vDC power supply and can be mounted vertically or horizontally on a DIN rail. The unit can..
View Product

6335 2-Wire Transmitter with HART 5 Protocol

The 6335 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART protocol suitable for PT100/PT1000, Ni100, TC, Ohm or mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The unt requires a 8 to 35vDC power supply and can be mounted vertically or horizontally on..
View Product

6337 2-Wire Transmitter with HART 7 Protocol

The 6337 is an extremely high accuracy DIN Rail mounting programmable transmitters with HART 5 or HART 7 protocol suitable for PT100/PT1000, Ni100, TC, Ohm or bipolar mV inputs. The transmitters converts the inputs into a 4-20mA outputs. The 6337 will also accept inputs from 2 RTD or TC sensors..
View Product

9113 Temperature/mA Converter

Temperature/mA converter module, detachable front programming unit 4501, can be configured for all types of standard industrial measuring signals such as RTD, TC, Ohm, potentiometer, mA and V. ATEX and SIL2 compliant..
View Product

Isolated Temperature Transmitter TxIsoRail

The TxIsoRail are fully programmable isolated temperature transmitters dedicated to PT100 and thermocouple industrial sensors. The TxIsoRail is a DIN rail mount unit suitable for mounting in panels or enclosures. Units are easily configured for input type and working range by means of an interface cable connected to a PC..
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now