DR-30 Series DIN Rail Mounted Power Supply – 12vDC at 24 Watts
The DR-30 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 12vDC output voltage at 2A. This provides an energy supply for bigger installations with many, or higher demand devices. ...
FTR DIN Rail Mounted Power Supply – 24vDC at 3 Watts
The FTR switch mode power supply provides a fixed stabilised output of 24vDC with a maximum power output of 3 Watts from a 85-250vAC power supply. The FTR power supply provides an isolated power supply and is suitable for powering instruments such as 4-20mA field transmitters and other devices requiring ...
DR-60 Series DIN Rail Mounted Power Supply – 24vDC at 60 Watts
The DR-60 Series power supply is a direct replacement for the FTR-60. The DR-60 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 24vDC output voltage at 2.5A. This provides an energy supply for bigger installations with many, or higher ...
The PR 5104 can be used as a power supply and signal isolator for 2-wire transmitters or as a signal isolator or repeater for a variety of standard industrial analogue input signals. The PR 5104A is available for safe area use as a single or dual channel device, whilst the ...
The SD-15X are single output panel-mount isolated DC/DC Converter Modules supplied in a well ventilated metal casing. This DC to DC converter can be used to converter a 9-72vDC power supply to a 5vDC, 12vDC or 24vDC power supply. Ideal applications are for converting a 12V solar panel, battery bank ...
We have a range of DC to DC converter modules, designed to power sensors requiring a 5vDC, 12vDC or 24vDC stabilised supply, where only a nominal 12vDC or 24vDC supply is available ...
DR-30 Series DIN Rail Mounted Power Supply – 12vDC at 24 Watts
The DR-30 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 12vDC output voltage at 2A. This provides an energy supply for bigger installations with many, or higher demand devices. ...
FTR DIN Rail Mounted Power Supply – 24vDC at 3 Watts
The FTR switch mode power supply provides a fixed stabilised output of 24vDC with a maximum power output of 3 Watts from a 85-250vAC power supply. The FTR power supply provides an isolated power supply and is suitable for powering instruments such as 4-20mA field transmitters and other devices requiring a 24vDC power supply. The FTR power supply is designed for DIN Rail mounting and wiring via screw terminals. This power supply is ideal for ...
DRAN30 Series Power Supply – 24vDC at 30 Watts
DIN Rail mounted mains power supply unit, wide 85-264 VAC input range. Unit provides a 24vDC output voltage at 1250mA. ...
DR-60 Series DIN Rail Mounted Power Supply – 24vDC at 60 Watts
The DR-60 Series power supply is a direct replacement for the FTR-60. The DR-60 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 24vDC output voltage at 2.5A. This provides an energy supply for bigger installations with many, or higher demand devices. ...
DRAN120 Series Power Supply – 24vDC at 120 Watts
DIN Rail mounted mains power supply unit, wide 115-230 VAC input range. Unit provides a 24vDC output voltage at 5A. ...
5104 Repeater/Power Supply
The PR 5104 can be used as a power supply and signal isolator for 2-wire transmitters or as a signal isolator or repeater for a variety of standard industrial analogue input signals. The PR 5104A is available for safe area use as a single or dual channel device, whilst the PR 5104B is suitable for use in hazardous areas. Programming is done using internal DIP switches using any one of the 20 factory calibrated measurement ...
DC to DC Converter with Screw Terminals
The SD-15X are single output panel-mount isolated DC/DC Converter Modules supplied in a well ventilated metal casing. This DC to DC converter can be used to converter a 9-72vDC power supply to a 5vDC, 12vDC or 24vDC power supply. Ideal applications are for converting a 12V solar panel, battery bank or alternator power supplies to a 24vDC power supply. Units can also be used to provide a stable regulated supply from an unregulated supply. Max ...
DC to DC Converters for Sensor Excitation
We have a range of DC to DC converter modules, designed to power sensors requiring a 5vDC, 12vDC or 24vDC stabilised supply, where only a nominal 12vDC or 24vDC supply is available ...
DR-30 Series DIN Rail Mounted Power Supply – 12vDC at 24 Watts
The DR-30 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 12vDC output voltage at 2A. This provides an energy supply for bigger installations with many, or higher demand devices. ...
FTR DIN Rail Mounted Power Supply – 24vDC at 3 Watts
The FTR switch mode power supply provides a fixed stabilised output of 24vDC with a maximum power output of 3 Watts from a 85-250vAC power supply. The FTR power supply provides an isolated power supply and is suitable for powering instruments such as 4-20mA field transmitters and other devices requiring ...
DR-60 Series DIN Rail Mounted Power Supply – 24vDC at 60 Watts
The DR-60 Series power supply is a direct replacement for the FTR-60. The DR-60 is a DIN Rail mounted mains power supply unit with a wide 100-240 VAC input range. Unit provides a 24vDC output voltage at 2.5A. This provides an energy supply for bigger installations with many, or higher ...
The PR 5104 can be used as a power supply and signal isolator for 2-wire transmitters or as a signal isolator or repeater for a variety of standard industrial analogue input signals. The PR 5104A is available for safe area use as a single or dual channel device, whilst the ...
The SD-15X are single output panel-mount isolated DC/DC Converter Modules supplied in a well ventilated metal casing. This DC to DC converter can be used to converter a 9-72vDC power supply to a 5vDC, 12vDC or 24vDC power supply. Ideal applications are for converting a 12V solar panel, battery bank ...
We have a range of DC to DC converter modules, designed to power sensors requiring a 5vDC, 12vDC or 24vDC stabilised supply, where only a nominal 12vDC or 24vDC supply is available ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
