These accessories are to enhance your Tinytag monitoring setup with our selection of specialised Tinytag accessories. From the “Tinytag Alarm Box – ACS-5001” that provides audible alerts and the protective Stevenson screen for accurate outdoor readings, to the convenience of the trigger start magnet for seamless field activation, these tools are designed to extend the functionality and reliability of your data loggers.
Tinytag Alarm Box for use with Tinytag Plus 2 and Tinytag View 2 loggers to provide an audible warning when an alarm condition has been met. A pair of volt free changeover contacts are available with programmable delay (1 second to 11 days). A blanking plug in the side of the case allows an external device, such as an SMS alarm unit, to be connected to the unit. Each unit is supplied with a 3m connection cable to connect to the data logger and alarm box and 9V battery. Dimensions: 122 x 79 x 32mm, weight 169g.
The Stevenson Type Screen (model ACS-5050) is an instrument shelter designed to protect Tinytag data loggers from adverse conditions, such as direct sunlight and precipitation, while allowing for free air circulation. It is specifically intended for outdoor monitoring applications and provides a stable, protected environment for the loggers.
The Stevenson type screen, or instrument shelter, shield data loggers against precipitation and direct heat radiation from outside sources, while still allowing air to circulate freely around it.This screen is big enough to accommodate two Tinytag Plus 2 sized data loggers.
The Trigger Start Magnet (model ACS-6000) is an accessory designed to initiate recording on various Tinytag data loggers that have been preconfigured for a trigger start. By simply passing the magnet over a designated location on the back of the logger, users can activate the device on-site without needing download cables, computers, or software at the deployment location. This setup is highly advantageous for medical applications to minimise contamination risks and streamlines fieldwork by eliminating the need for on-site technical training.
Trigger Start Magnet for various Tinytag data loggers. The magnet is ideal for delayed triggering of Tinytag loggers that have been set up for a trigger start. The magnet is merely passed over the correct location on the logger and the lights will start to flash showing that logging procedure has been started. The position of the unit's trigger start switch is indicated by the • • • label on the back of the logger.
A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
