DPT-FLOW-7000-AZ-D
DPT-Flow-7000-AZ-D - Air Flow and Velocity Transmitter. Designed for Building Management Automation Systems with measurements for Volume Flow, Velocity and Static and Differential Pressures. Power Supply: 24V ±10% @ <1W. Measuring Range: 700 - 7000 Pascals. Accuracy: >125 Pa, ±1%, ±1 Pa and <125 Pa, ±1%, ±2 Pa. Selectable Output:..
KITFS3
Positector Inspection Kit Suitable for Monitoring Coating Thicknesses of Ferrous Metals, Surface Profiles and Environmental Conditions. KITFS3 Inspection Kit contains: Advanced PosiTector Gage Body, PosiTector 6000 FS Cabled Coating Thickness Probe (Range 0-1,500µm), PosiTector DPM Environmental Probe, PosiTector SPG Surface Profile Probe, Precision Plastic Shims, Glass Zero Plate and Metal..
LEX1-300BAR-0.05%-1/4BSP
LEX 1 Digital Manometer with digital display for pressure and Min/Max values. Range 0 to 300 Bar (Absolute pressure reference) with 0.01 Bar resolution and ±0.05%FS accuracy. Pressure connection: Stainless Steel ¼" BSP male connection with Viton O ring. Rear mating socket for 8-28vDC Power Supply and RS485 Modbus Output...
MCDC8M
Blanking cap for miniature series MCIL type subsea connector, 8 pin male, to suit MCIL8F inline connector or MCBH8F bulkhead connectors. This item isn't available to purchase online but is normally held in stock. You can contact us directly to check availability and pricing. info@omni.uk.com..
MR42 Rain Sensor
The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew,..
N323R Electronic Thermostat with Defrost Cycle
The N323R Electronic Thermostats are designed for refrigeration application with 3 relays. Allowing independent control for the defrost cycle, compressor activation and evaporator programmable defrost cycle that can turn off a compressor at pre-determined time intervals for a specific duration. Manual Defrost key is also available on the front panel...
N323TR Electronic Thermostat with RTC
The N323TR Electronic Thermostats are designed for refrigeration application with 3 relays and an internal clock. Allowing independent control for the defrost cycle, compressor activation and evaporator, plus programmable defrost cycle that can turn off a compressor at specific times of day. Allowing the higher demand periods to be managed..
TGRF-4602-A
inytag Plus Radio Temperature Data Logger with Two Temperature and Relative Humidity Probes. Measurement Range: -25 to +85°C, Resolution 0.01°C and 0.04%RH. Logging Interval: 2 mins to 10 day with 2 Fully Programmable, Latching Alarms, per channel with 1 sec to 10 days Alarm Delay. Red LED and Tinytag Explorer..
TRX Portable Strain Gauge Indicator with TEDS Functionality.
The TRX is a battery, or USB, powered, portable, high resolution digital load cell indicator designed to work with all types of load cell and strain gauge based transducer. The TRX display comes with TEDS (Transducer Electronic Data Sheet) functionality, allowing it to read the calibration data from connected sensors...
TSPC-21S-485
Standard ToughSonic 50 Ultrasonic Level Sensor. Optimal range 305mm to 10m, max range 15.2m. Power Supply 10-30vDC with programmable outputs between 0-10vDC and 4-20mA, plus NPN & PNP switch outputs (configurable as sinking or sourcing) and RS485 serial interface. Marine grade 316 Stainless Steel IP68 smooth housing for easy clamping..
UTGCA3
Positector UTG-CA3 with Advanced Body. 2.8" Impact Resistant Colour Touchscreen with Keypad for Quick Menu Navigation and Batch Renaming, Auto Rotating Display with Flip Lock. Audible and Visual Hi-Lo Alarm, Min Scan Mode, Statistics Mode and Storage Capacity 250,000 Readings in up to 1,000 batches and sub-batches. Bluetooth 4.0 and..
WP1012-RAMP
WP Series - Platform Ramp in Mild Steel for Weighing platform (1000 x 1250mm). Fits to smallest side. Priced per ramp...
18108653
Single-Unit Truck-mount Charger with 12vDC hard-wired connection for Ventis MX4 gas detector...
66703
Replacement Fast Charge Battery Pack for the PS500 Portable Gas Detector..
AC-CT-100A
Current Transducer T16/100A 180cm / 70.87 inches..
BM25KITCHD100
BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 100m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
KITFT3
Positector Inspection Kit Suitable for Monitoring Thick Protective Coatings on Ferrous Metals, Surface Profiles and Environmental Conditions. KITFT3 Inspection Kit contains: Advanced PosiTector Gage Body, PosiTector 6000 FT Integrated Coating Thickness Probe (Range 0-6mm), PosiTector DPM Environmental Probe, PosiTector SPG Surface Profile Probe, Precision Plastic Shims, Glass Zero Plate and..
LEX1-700BAR-0.05%-1/4BSP
LEX 1 Digital Manometer with digital display for pressure and Min/Max values. Range 0 to 700 Bar (Absolute pressure reference) with 0.05 Bar resolution and ±0.05%FS accuracy. Pressure connection: Stainless Steel ¼" BSP male connection with Viton O ring. Rear mating socket for 8-28vDC Power Supply and RS485 Modbus Output...
UTGCX3
Positector UTG-CX3 with Advanced Body. 2.8" Impact Resistant Colour Touchscreen with Keypad for Quick Menu Navigation and Batch Renaming, Auto Rotating Display with Flip Lock. Audible and Visual Hi-Lo Alarm, Min Scan Mode, Statistics Mode and Storage Capacity 250,000 Readings in up to 1,000 batches and sub-batches. Bluetooth 4.0 and..
AC-CT-200A
Current Transducer T24/200A 180cm / 70.87 inches..
KITFTS3
Positector Inspection Kit Suitable for Monitoring Thick Protective Coatings on Ferrous Metals, Surface Profiles and Environmental Conditions. KITFTS3 Inspection Kit contains: Advanced PosiTector Gage Body, PosiTector 6000 FTS Integrated Coating Thickness Probe (Range 0-6mm), PosiTector DPM Environmental Probe, PosiTector SPG Surface Profile Probe, Precision Plastic Shims, Glass Zero Plate and..
LEX1-1000BAR-0.05%-1/4BSP
LEX 1 Digital Manometer with digital display for pressure and Min/Max values. Range 0 to 1,000 Bar (Absolute pressure reference) with 0.1 Bar resolution and ±0.05%FS accuracy. Pressure connection: Stainless Steel ¼" BSP male connection with Viton O ring. Rear mating socket for 8-28vDC Power Supply and RS485 Modbus Output...
UTGCLF3
Positector UTG-CLF3 with Advanced Body. 2.8" Impact Resistant Colour Touchscreen with Keypad for Quick Menu Navigation and Batch Renaming, Auto Rotating Display with Flip Lock. Audible and Visual Hi-Lo Alarm, Min Scan Mode, Statistics Mode and Storage Capacity 250,000 Readings in up to 1,000 batches and sub-batches. Bluetooth 4.0 and..
