5715B
PR 5715B 4 Digit Red LED display. Accepts a single 4-20mA, 0-1V, 0.2.1V, 0-10V, PT100 and Thermocouple inputs. Programmable via front keys, 2.3kVAC Galvanic isolation, 4 x Relay output. Universal power supply: 21.6 to 253vAC or 19.2 to 300vDC, plus Auxiliary supply for sensors of 16-25vDC / 0-20mA. IP65 Rated..
5725A
Digital display, 4 digit red LED display, pulse or frequency input, P/S 21.6 - 253vAC/19.2-300vDC...
59630-1-T-02-A
Normally Open vertical float switch suitable for most liquids. Sensor uses an integral float magnet, switching when float falls to end stop position. Sensor is supplied with 300mm cable and an M8 x 1.25mm pitch thread. Capable of switching up to 200vDC at 10VA in an operating temperature of -40..
601-ABCD
Polargraphic Dissolved Oxygen Electrode with a Teflon membrane. Output at Saturation: 600nA..
60101503
F.Core Inline Flow Sensor for compressed air and Nitrogen with OLED display. Outputs 4-20mA, digital and IO Link. ½″ BSP Female Ports. Accuracy ±3% of reading. Power Supply: 17-30vDC. Operating pressure 16 Bar Max...
603-ABCD
Galvanic Dissolved Oxygen Probe...
6185A
6185 Single Channel Loop Powered Isolator. Galvanic isolation and 1:1 conversion of current signals within the range 0-20 mA, Response time: less than 4 ms, Accuracy 0.1% of span. Power Supply: Loop powered via the input loop, voltage drop less than 1.8V...
6331A2A
2-Wire programmable transmitter with a 7.2-35vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail...
6333A1A
2-Wire programmable transmitter with a 8-35vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. Can be mounted vertically or horizontally on a DIN rail...
6334A2A
2-Wire programmable transmitter with a 7.2-35vDC power supply. Single channel unit for TC or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail...
6335A2A
2-Wire programmable transmitter with HART Protocol and an 8-35vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail...
6337A2A
PR6337A 2-Wire programmable transmitter with HART 7 Protocol and an 8-35vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail...
6513542
OLCT80 Transmitter with LCD display for flameproof local sensor, sensor block available separately. The OLCT80 transmitter is supplied with 6 XP sealing plugs (4x M20 and 2 x M25), suitable cable gland kits are available separately to allow access to 2 auxiliary inputs (4-20mA or digital state), 3 SPDT relay..
6514807
SV4B, DIN rail mounting single channel monitor..
748-521
Type T slimline, 6.2mm thick DIN rail mount thermocouple transmitter, range -50 to + 100 deg c, power supply 19.2 - 30v DC, accuracy 0.1%, output 4-20mA..
8032101012
N321 Electronic Thermostat for General Cooling/Heating Control with Single SPDT Relay Output, Max 250vAC @ 16A. Direct Switching of compressor or electrical heater, with programmable delay on power up. Accepts PT100 Input (NBR 13773/97 Standard). Measurement Range: -50 to +300°C (-58 to 572F), Accuracy 0.2%FS, ±2°C @ 25°C. Power Supply:..
80321R3012
N321R Electronic Thermostat for Refrigeration Control with Defrost Cycle. Programmable defrost cycle interval and duration as well as compressor stop, resistance heating or reverse cycle. Direct switching of compressor, with single SPDT relay. Accepts NTC Thermistor Input. Measurement Range: -50 to +120°C (-58 to 248F), Accuracy 0.6°C between -19.9 to..
8032201022
N322 Electronic Thermostat for Cooling/Heating Control with Single SPDT Relay Output, Max 250vAC @ 16A. Direct Switching of compressor or electrical heater with simple ON/OFF control and a second SPST-NO Relay (Max 250vAC @ 3A) suitable for additional control or alarm. Accepts PT100 Input (NBR 13773/97 Standard). Measurement Range: -50..
8096200020
N960-RR - Input: Thermocouples, PT100 - Output: 2 relays - Power Supply: 85/264Vca...
814-038
Ray-Temp-38 Infrared non-contact gun-shaped thermometer. Temperature range -60 to +1000°C, target ratio 50:1, resolution 0.1°C between -10 and 200°C (otherwise 1°C). Also incorporates a thermocouple socket for K Type thermocouple probes...
81500G0210
N1500G Large 5-Digit Universal Indicator. Display will accept inputs from PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC with a 24vDC power supply available for sensor excitation. Unit provides outputs in RS485 ModBus RTU, an analogue 0/4-20mA output and 2 alarm relays. Power Supply 100-240vAC...
81500LC410
N1500-LC Load Cell Indicator. Suitable for Load Cells requiring a 5 or 10vDC excitation voltage. Input Range: 0-20mV; 0-50mV; -20 to +20mV; or 0/4-20mA. Programmable via front keypad and bright LED display. IP20 ABS and Polycarbonate Enclosure with IP65 Polycarbonate Front Panel Dimensions 96 x 48 x 92mm. 41 -..
82000S0130
N2000-S Servo-positioning In: Universal / out: 2 relays and 4-20mAdc..
8200200130
N2000 Universal Controller with dual LED display suitable for PT100, Thermocouples, 4-20mA, 0-50mV and 0-5vDC inputs. One digital input for dry contact. Isolated 4-20mA output channel, also configurable for Digital I/O (10vDC @ 20mA). Dual SPST 250vAC @ 3A relays and dual SPDT 250vAC @ 5A relays can be individually..
