The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...
3101 Slim Series Thermocouple Temperature Converter suitable for use in ATEX Zone 2 Environments. Conversion of J & K Type Thermocouple temperature sensor input signal to a 0(2)-10V, 0(1)-5V or 0(4)-20mA output signals. Response time: less than 30ms (300ms when signal dampening), Accuracy better than ±0.1% of span. Power Supply: ...
PR3103 Slim Series Isolated Repeater suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of current signals within the range 0-20mA, Response time: less than 7 ms, Accuracy 0.05% of span. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
3186A1 Single Channel 2-Wire Transmitter Isolator suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of passive current input signals with 3.5-32.5V excitation, Response time: less than 5 ms, Accuracy 0.05% of the 3.8-20.5mA span. Loop powered via the output loop, voltage drop 2.5V typical. 6mm Slimline ...
PR3225A Slim Series Universal Converter suitable for use in Hazardous Areas. Frequency Input: 0.001Hz to 100kHz. Output: 1 Analogue (Current: 0-20, 4-20, ±10mA, or ±20mA; Voltage: 0-5, 1-5, 0-10, 2-10, ±5, ±10vDC), Power and Off). Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
4 core screened cable, current rating 1 amp, voltage rating 440 V, with 7 / 0.2mm tinned copper strands. Black PVC insulation. Suitable for 0-10v, 4-20mA signals, RS232 & 485 data connections etc. Ideal cable for wiring sensors and other instruments back to a main enclosure or data logger. ...
MC 4.0 Multiprobe Anemometer with Touchscreen, 4.000mAh Lithium Polymer Battery & Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, ...
MC 4.0 ManoAir Manometer Display. Range ±2,000Pa. The MC 4.0 can measure absolute or differential pressures, filter and pitot tubes for ventiliation ducts. Measurement Range ±2000Pa. Resolution: 1Pa, Accuracy: <100 Pa ± 3 Pa + ±0.10%FS >100 Pa ±10 Pa + ±0.10%FS. 3.2" TFT-Display, 2Hz measurement rate, internal logger for ...
Lab 4.0 - Manometer with 2 included modules: ±250Pa, ±2,500Pa (other on request) Touch Screen and 10,000mAh Battery. Dimensions 270 x 245 x 95mm, Weight 1.22Kg ...
MC 4.0 ThermoAir Anemometer Display with 4,000mAh Lithium Polymer Battery, Lemo and USB C Connector. The MC 4.0 display has the Extramodule fitted to connect up to two ThermoAir Anemometers to take very low air flow readings. 3.2" Display, 2Hz measurement rate, internal logger for up to 1 million readings. ...
PR4104 Universal Uni-/Bi-Polar Signal Transmitter with universal AC or DC power supply. Programmable Inputs: Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Voltage - 0-1V, 0.2-1V, 0-5V, 1.5V, 0-10V, 2-10V, ±1V, ±5V or ±10V. Outputs: Active Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Passive Current - 0-20mA, 4-20mA; Voltage - 0-1V, ...
PR4114 Programmable Universal Transmitter with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating ...
The PR 4114 is a programmable universal transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The unit converts the input into a configurable 0(4)-20mA or 0-10V output that is proportional and linear to the value of the input. Units are available with ...
PR4116 Programmable Universal Transmitter/Trip Amplifier with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V; and 2 configurable relays. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 ...
PR4179 Programmable Universal AC/DC Transmitter with universal AC or DC power supply. Input: 0-5A AC RMS or 0-300vAC RMS. Output: Active unipolar or bipolar ±20mA, 2-wire 0-20mA, bipolar ±10V with direct or inverted action. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: ...
PR4184 Programmable Universal Uni/Bi-Polar Signal Transmitter. Input: ±300vDC or ±100mA. Output: ±23mA (Active or Passive) or ±10vDC. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60°C, 0-95%RH (non-condensing). ...
ThermoAir Pro Directional (V) Thermal-Electric Directional Anemometer. Air Velocity Range: 0.015-1m/s with a 0-1V Output. Accuracy ±1.0% of full scale. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. The sensor can be used at temperatures from ...
Liquid level float switch, overhead suspension type, with 5 metres of cable, contact rated max Switching Voltage 250V AC, 110V DC. Maximum current 10 amps. ...
PR Electronics 5104 programmable transmitter, 24-230 VAC/DC power supply, 1 channel with 0-20, 4-20mA, voltage input & mA or voltage output. See datasheet for Input & Output options. ...
The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units. ...
3101 Slim Series Thermocouple Temperature Converter suitable for use in ATEX Zone 2 Environments. Conversion of J & K Type Thermocouple temperature sensor input signal to a 0(2)-10V, 0(1)-5V or 0(4)-20mA output signals. Response time: less than 30ms (300ms when signal dampening), Accuracy better than ±0.1% of span. Power Supply: 24vDC ±30%. 6mm Slimline housing. Units are DIP-switch configured. ...
PR3103 Slim Series Isolated Repeater suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of current signals within the range 0-20mA, Response time: less than 7 ms, Accuracy 0.05% of span. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
3186A1 Single Channel 2-Wire Transmitter Isolator suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of passive current input signals with 3.5-32.5V excitation, Response time: less than 5 ms, Accuracy 0.05% of the 3.8-20.5mA span. Loop powered via the output loop, voltage drop 2.5V typical. 6mm Slimline housing. ...
PR3225A Slim Series Universal Converter suitable for use in Hazardous Areas. Frequency Input: 0.001Hz to 100kHz. Output: 1 Analogue (Current: 0-20, 4-20, ±10mA, or ±20mA; Voltage: 0-5, 1-5, 0-10, 2-10, ±5, ±10vDC), Power and Off). Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
4 core screened cable, current rating 1 amp, voltage rating 440 V, with 7 / 0.2mm tinned copper strands. Black PVC insulation. Suitable for 0-10v, 4-20mA signals, RS232 & 485 data connections etc. Ideal cable for wiring sensors and other instruments back to a main enclosure or data logger. ...
MC 4.0 Multiprobe Anemometer with Touchscreen, 4.000mAh Lithium Polymer Battery & Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth connectivity. Dimensions: 168 x 68 x 38mm, Weight 300g, IP67 with a removeable blue rubber ...
MC 4.0 ManoAir Manometer Display. Range ±2,000Pa. The MC 4.0 can measure absolute or differential pressures, filter and pitot tubes for ventiliation ducts. Measurement Range ±2000Pa. Resolution: 1Pa, Accuracy: <100 Pa ± 3 Pa + ±0.10%FS >100 Pa ±10 Pa + ±0.10%FS. 3.2" TFT-Display, 2Hz measurement rate, internal logger for up to 1 million readings and bluetooth connectivity. Dimensions: 168 x 68 x 38mm, Weight 300g, IP67 with a removeable green rubber case. Operating Temperature ...
Lab 4.0 - Manometer with 2 included modules: ±250Pa, ±2,500Pa (other on request) Touch Screen and 10,000mAh Battery. Dimensions 270 x 245 x 95mm, Weight 1.22Kg ...
MC 4.0 ThermoAir Anemometer Display with 4,000mAh Lithium Polymer Battery, Lemo and USB C Connector. The MC 4.0 display has the Extramodule fitted to connect up to two ThermoAir Anemometers to take very low air flow readings. 3.2" Display, 2Hz measurement rate, internal logger for up to 1 million readings. Dimensions: 168 x 68 x 38mm, Weight 300g, IP67 with a removable red rubber case. Operating Temperature 0 to 60°C, 0-99%RH. ...
PR4104 Universal Uni-/Bi-Polar Signal Transmitter with universal AC or DC power supply. Programmable Inputs: Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Voltage - 0-1V, 0.2-1V, 0-5V, 1.5V, 0-10V, 2-10V, ±1V, ±5V or ±10V. Outputs: Active Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Passive Current - 0-20mA, 4-20mA; Voltage - 0-1V, 0.2-1V, 0-5V, 1.5V, 0-10V, 2-10V, ±1V, ±5V or ±10V. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: 109 x 23.5 ...
PR4114 Programmable Universal Transmitter with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60 C, 0-95%RH (non-condensing). ...
The PR 4114 is a programmable universal transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The unit converts the input into a configurable 0(4)-20mA or 0-10V output that is proportional and linear to the value of the input. Units are available with the 4510 programming display or the 4511 Modbus communications/programming interface. Universal AC or DC power supply. ...
PR4116 Programmable Universal Transmitter/Trip Amplifier with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V; and 2 configurable relays. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60 C, 0-95%RH (non-condensing). ...
PR4179 Programmable Universal AC/DC Transmitter with universal AC or DC power supply. Input: 0-5A AC RMS or 0-300vAC RMS. Output: Active unipolar or bipolar ±20mA, 2-wire 0-20mA, bipolar ±10V with direct or inverted action. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60°C, 0-95%RH (non-condensing). ...
PR4184 Programmable Universal Uni/Bi-Polar Signal Transmitter. Input: ±300vDC or ±100mA. Output: ±23mA (Active or Passive) or ±10vDC. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60°C, 0-95%RH (non-condensing). ...
ThermoAir Pro Directional (V) Thermal-Electric Directional Anemometer. Air Velocity Range: 0.015-1m/s with a 0-1V Output. Accuracy ±1.0% of full scale. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. The sensor can be used at temperatures from 0 to +60°C with automatic temperature compensation at 0 to 60°C. The associated cable for connection to the remote transmitter has a total length of ...
Liquid level float switch, overhead suspension type, with 5 metres of cable, contact rated max Switching Voltage 250V AC, 110V DC. Maximum current 10 amps. ...
PR Electronics 5104 programmable transmitter, 24-230 VAC/DC power supply, 1 channel with 0-20, 4-20mA, voltage input & mA or voltage output. See datasheet for Input & Output options. ...
The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...
3101 Slim Series Thermocouple Temperature Converter suitable for use in ATEX Zone 2 Environments. Conversion of J & K Type Thermocouple temperature sensor input signal to a 0(2)-10V, 0(1)-5V or 0(4)-20mA output signals. Response time: less than 30ms (300ms when signal dampening), Accuracy better than ±0.1% of span. Power Supply: ...
PR3103 Slim Series Isolated Repeater suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of current signals within the range 0-20mA, Response time: less than 7 ms, Accuracy 0.05% of span. Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
3186A1 Single Channel 2-Wire Transmitter Isolator suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of passive current input signals with 3.5-32.5V excitation, Response time: less than 5 ms, Accuracy 0.05% of the 3.8-20.5mA span. Loop powered via the output loop, voltage drop 2.5V typical. 6mm Slimline ...
PR3225A Slim Series Universal Converter suitable for use in Hazardous Areas. Frequency Input: 0.001Hz to 100kHz. Output: 1 Analogue (Current: 0-20, 4-20, ±10mA, or ±20mA; Voltage: 0-5, 1-5, 0-10, 2-10, ±5, ±10vDC), Power and Off). Power Supply: 24vDC ±30%, via power rail or terminals. 6mm Slimline housing. ...
4 core screened cable, current rating 1 amp, voltage rating 440 V, with 7 / 0.2mm tinned copper strands. Black PVC insulation. Suitable for 0-10v, 4-20mA signals, RS232 & 485 data connections etc. Ideal cable for wiring sensors and other instruments back to a main enclosure or data logger. ...
MC 4.0 Multiprobe Anemometer with Touchscreen, 4.000mAh Lithium Polymer Battery & Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Touchscreen Display, 2Hz measurement rate, ...
MC 4.0 ManoAir Manometer Display. Range ±2,000Pa. The MC 4.0 can measure absolute or differential pressures, filter and pitot tubes for ventiliation ducts. Measurement Range ±2000Pa. Resolution: 1Pa, Accuracy: <100 Pa ± 3 Pa + ±0.10%FS >100 Pa ±10 Pa + ±0.10%FS. 3.2" TFT-Display, 2Hz measurement rate, internal logger for ...
Lab 4.0 - Manometer with 2 included modules: ±250Pa, ±2,500Pa (other on request) Touch Screen and 10,000mAh Battery. Dimensions 270 x 245 x 95mm, Weight 1.22Kg ...
MC 4.0 ThermoAir Anemometer Display with 4,000mAh Lithium Polymer Battery, Lemo and USB C Connector. The MC 4.0 display has the Extramodule fitted to connect up to two ThermoAir Anemometers to take very low air flow readings. 3.2" Display, 2Hz measurement rate, internal logger for up to 1 million readings. ...
PR4104 Universal Uni-/Bi-Polar Signal Transmitter with universal AC or DC power supply. Programmable Inputs: Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Voltage - 0-1V, 0.2-1V, 0-5V, 1.5V, 0-10V, 2-10V, ±1V, ±5V or ±10V. Outputs: Active Current - 0-20mA, 4-20mA, ±10mA or ±20mA; Passive Current - 0-20mA, 4-20mA; Voltage - 0-1V, ...
PR4114 Programmable Universal Transmitter with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating ...
The PR 4114 is a programmable universal transmitter suitable for Thermocouple, RTD, Resistance, mV, mA or Voltage inputs and 3.75 kVAC galvanic isolation. The unit converts the input into a configurable 0(4)-20mA or 0-10V output that is proportional and linear to the value of the input. Units are available with ...
PR4116 Programmable Universal Transmitter/Trip Amplifier with universal AC or DC power supply. Input: RTD; Thermocouples; Ohm; potentiometers; mA; V. Output: 0(4)-20mA; 0-10V; and 2 configurable relays. Galvanic isolation of inputs and outputs. Power supply 21.6 - 253vAC or 19.2 - 300vDC plus 16-25vDC auxiliary supply. DIN Rail mounted. Dimensions: 109 ...
PR4179 Programmable Universal AC/DC Transmitter with universal AC or DC power supply. Input: 0-5A AC RMS or 0-300vAC RMS. Output: Active unipolar or bipolar ±20mA, 2-wire 0-20mA, bipolar ±10V with direct or inverted action. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: ...
PR4184 Programmable Universal Uni/Bi-Polar Signal Transmitter. Input: ±300vDC or ±100mA. Output: ±23mA (Active or Passive) or ±10vDC. 2.3kVAC isolation voltage. Power supply 21.6 - 253vAC or 19.2 - 300vDC. DIN Rail mounted. Dimensions: 109 x 23.5 x 104mm. Operating Temperature -20 to +60°C, 0-95%RH (non-condensing). ...
ThermoAir Pro Directional (V) Thermal-Electric Directional Anemometer. Air Velocity Range: 0.015-1m/s with a 0-1V Output. Accuracy ±1.0% of full scale. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. The sensor can be used at temperatures from ...
Liquid level float switch, overhead suspension type, with 5 metres of cable, contact rated max Switching Voltage 250V AC, 110V DC. Maximum current 10 amps. ...
PR Electronics 5104 programmable transmitter, 24-230 VAC/DC power supply, 1 channel with 0-20, 4-20mA, voltage input & mA or voltage output. See datasheet for Input & Output options. ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
