4179 Universal AC/DC Transmitter
The 4179 is a programmable universal transmitter suitable for converting AC voltage or current to a standard DC voltage and current signal with 2.3kV isolation. The unit is capable of measuring up to 0 to 5A RMS and 0-300V RMS directly with a narrow 500mA RMS and 500mV RMS span...
8801825040
WL420 Submersible Hydrostatic Level Transmitter. Depth Range 25mH2O. 2-Wire Loop Powered 4-20mA Output with a 12-36vDC Power Supply. 40m Polyurethane (PUR) Cable with Ventilation Tube. Over-Pressure 200% FS, Burst Pressure 500% FS. Stainless Steel Sensor with 105mm Body Length and 26.5mm Diameter...
CA-17/05
Sealed Gel Battery. Storage Capacity 75Ah, Output 12V. Dimensions: 272 x 165 x 188mm. Weight: 21.5Kg..
CA-17/25
Absorbed Glass Matt (AGM) Battery. Storage Capacity 169Ah, Output 12V. Dimensions: 340 x 173 x 280mm. Weight: 39.6Kg..
CTH-400A-5V-24VDC
CTH type 5 DC current sensor range 0-400 AMPS DC, output 0-5v DC, power supply 24v DC, with 21mm diameter hole...
EL-WiFi-TP Thermistor Probe Data Logger
The EL-WiFi-TP is a wireless data logger with an external thermistor probe. The logger transmits the collected temperature readings via a WiFi network back to a PC for monitoring. The internal memory can retain up to 1 million data set entries between downloads. Measurement ranges are -40 to +125°C (-40..
IPRO608
GasBadge Pro Personal Single Gas Monitor for Chlorine Dioxide (ClO2). Range 0-1 ppm in 0.01ppm increments. 1 Year continuous data logging, plus event logging for last 15 alarm events. Backlit LCD display. Ultra-bright LED, vibrating and audible (95dB) alarms with STEL and TWA and selectable low and high alarm levels...
Keller PD10L OEM Differential Pressure Transducer
Series PD10L Piezoresistive OEM differential pressure transducers with optimum stability from Keller. The PD10L Series pressure transducers are designed to measure differential pressure using a single silicon diaphragm, which is pressurised from both sides and measured the pressure difference directly. This design allows the sensor to measure tiny differences in..
MSR160 Data Logger with 4 Analogue Inputs
The MSR160 is a miniature universal data logger for measuring up to four integrated analogue inputs, a high measurement rate and the optional MicroSD card provides a gigantic memory capacity for over 1 billion parameters. The analogue inputs modules accepts a range of V and mA inputs with a 12..
Nemo 96 HD Multi-Function Power Meters
The Nemo 96 HD is a multifunction power meter designed as a panel mounted meter with plug in modules for different communication outputs. Output modules include RS485 (Modbus/JBus RTU protocols), RS232, Pulse Output, 4-20mA, SPST Relays, M-Bus and Profibus protocols...
OMEGA-WP-SDC250
OMEGA Helix Woltmann Type Bulk Water Meter. Pipe diameter 250mm with PN16 flanged connections, flow range: Qmin 7.9m3/hr; Qn 630m3/hr; Qmax 788m3/hr. Epoxy coated cast Iron body suitable for up to water up to 30 C with WRAS Approval. All OMEGA Flowmeters come prepared for a pulse output of Ltr/pulse...
PDFM3L Portable Doppler Flow Meter
The PDFM3L is a handheld non-invasive microprocessor based meter for measuring the flow rate and total volume of liquids flowing through process and effluent pipelines. It is suitable for a wide range of liquids, including aerated water, liquids containing suspended solids, slurries and sludges. The PDFM3L requires fluids with a..
PL-692-10
PL-692-10 differential pressure transmitter suitable for liquids, steam and gases. Pressure range 0-10 BarD over a 4-20mA output with 11-33vDC power supply. IP65 stainless steel casing with a pair of 6mm compression pressure connection, ceramic Al2O3 (96%) diaphragm and 1.5m flying lead. Operating temperature range -15 to +85°C...
PM-CT-600SC
Current Transformer (split core type) - Primary current - 600A, Rating Class 3 - 5.0 VA..
PM-CT-M600
Current Transformer (moulded type) - Primary current - 600A, Rating Class 3 - 10VA..
RMS1-XR-11008-0X-GR-MB
Remote Outputs Module, 8 Digital Relay Outputs. RS232/RS485 Modbus ASCII/RTU Communication, Wide power supply range: 10 up to 30vDC, DIN rail mounting...
Tinytag Plus 2 Instrumentation Data Loggers for Digital Inputs
These Tinytag Plus 2 instrumentation loggers are designed to monitor digital and contact inputs. The logger can count up to 14,000 per logging interval with a max 50Hz frequency. Digital inputs with low levels ±0.3V and high 3-5V and contact inputs as simple open or closed circuits. The unit has..
WPI-SDC-250
WPI-SDC Irrigation Water Flowmeter. Pipe diameter DN250 with standard PN16 flanges. Flow range Q1 50m³/h, Q2 80m³/h, Q3 1,000m³/h and Q4 1,250m³/h. IP68 Epoxy Coated Iron body with replaceable copper can mechanism. Additional pulse output options from 1 to 10 m³/pulse are available at the time of order. (Please order..
Keller PD10LHP OEM Differential High Pressure Transducer
The Keller PD10LHP utilises a dual-cell construction with a higher pressure rating then the PD10L, allowing up to 600 Bar Line Pressures. The unique architecture provides superior accuracy over even low differential pressures at high line pressures. It is critical that line pressure is applied evenly to both sides of..
4184 Universal Uni/Bi-Polar Signal Transmitter
The 4184 is a programmable universal transmitter suitable for converting uni/bi-polar DC voltage or current inputs to uni-bi-polar DC outputs. The unit is capable of measuring DC voltages from -300V to +300V and DC currents from -100mA to +100mA. Units are available with the 4510 programming display or the 4511..
8801840050
WL420 Submersible Hydrostatic Level Transmitter. Depth Range 40mH2O. 2-Wire Loop Powered 4-20mA Output with a 12-36vDC Power Supply. 50m Polyurethane (PUR) Cable with Ventilation Tube. Over-Pressure 200% FS, Burst Pressure 500% FS. Stainless Steel Sensor with 105mm Body Length and 26.5mm Diameter...
CA-17/28
Absorbed Glass Matt (AGM) Battery. Storage Capacity 188Ah, Output 12V. Dimensions: 530 x 209 x 214mm. Weight: 52.2Kg..
CA-17/37
Sealed Gel Battery. Storage Capacity 88Ah, Output 12V. Dimensions: 259 x 168 x 208mm. Weight: 23.30Kg..
DG7 Series Intelligent Gas Detectors
The DG7 Series Intelligent gas detectors is split over three main options housed in a common unit with interchangeable, intrinsically safe sensor cartridges that can be replaced while powered. The DGI-TT7-E monitors toxic gases or oxygen using electrochemical cells, the DG-TT7-S employs a solid-state metal oxide semiconductor, and the DG-TX7..
