SCA Series Inclinometers
The SCA Series inclinometer are industrial grade inclinometers with options for voltage or current analog and serial data outputs. The SCA inclinometers are available in a rugged industrial enclosure, or as an OEM board for installation into your own equipment or enclosure. Accuracy up to 0.02, fast angle response of..
Senturion XPR04 Proximity Probe
The Senturion XPR04 proximity probe system is an 8mm tip proximity sensor that uses eddy current principle to measure distance up to 2.5mm or 4mm with resolution of less than 1 micrometer. It is designed for monitoring targets from as little as 16mm in applications, even those in a harsh..
SGA/D
SGA/D Mains Power Strain Gauge Amplifier for Load Cells and Stain Gauges. Power Supply 18/24vDC. 5 or 10V Bridge Excitation with Bridge Sensitivity 0.06 to 30mV/V and Output Options: ±5, ±10, 0-5 or 0-10V and 0-20 or 4-20mA. Operating Temperature Range -10 to +50°C, IP67 ABS Housing with 3 M16..
SGR Series Rotary Transducer For Torque, Speed & Power Measurements
These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the..
SGR4 Smart Pyrgeometer
The SGR4 is a Smart Pyrgeometer, designed to provide meteorological measurements of downward atmospheric long wave radiation. The construction of SGR4 pyrgeometers is identical to the CGR4 pyrgeometers but it includes a Modbus interface and amplified analogue output. The SGR4 uses a thermopile detector in a spectral range of 4.5..
SGR512
SGR512 TorqSense Torque sensor with a fixed analogue outputs for Torque, Speed and Power measurements with integral electronics. Torque ranges from 0-175mNm to 0-13,000 Nm and 360 Pulse/Revolution...
SGR520/521/522 Series Digital Rotary Torque Transducer
The SGR520/521/522 TorqSense Transducers offer RS232, CANBus, USB and Ethernet outputs as well as variable voltage or current outputs for Torque, Speed/Angle and Power monitoring. Featuring BIT self-diagnostics, a status LED, an output pin for health feedback, and temperature sensors for enhanced accuracy...
SGR533
SGR533 TorqSense Torque sensor with a fixed analogue outputs for torque and power measurements with external electronics. Torque ranges from 0-1Nm to 0-13,000 Nm...
SGR540 TorqSense Transducer
SGR540 TorqSense Transducer for Torque Measurements with External Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR540 can provide readings for Torque Only with a variable analogue current or voltage output with a power supply 12-32vDC. Select Options to build your own the SGR540 on our Part Builder...
SGR541 TorqSense Transducer
SGR541 TorqSense Transducer for Torque Measurements with External Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR541 can provide readings for Torque, Speed and Power with 60 pulse per revolution encoder with variable analogue current or voltage outputs with a power supply 12-32vDC. Select Options to build your own..
SGR542 TorqSense Transducer
SGR542 TorqSense Transducer for Torque Measurements with External Electronics and Digital (RS232, CANBus, USB or Ethernet) outputs. SGR542 can provide readings for Torque, Speed/Angle and Power with 360 pulse per revolution encoder with up to 3 variable analogue current or voltage outputs with a power supply 12-32vDC. Select Options to..
SII4R2
COM port redirector driver enables legacy serial software to gain access to the network. 1 seat. 2 virtual Serial COM...
SP-LITE-15M
SP-LITE Pyranometer is suitable for solar irradiance measurements in spectral ranges of 400 to 1100nm up to a maximum of 2,000 W/m² with response time less than 1 seconds and typical sensitivity of 10µV/W/m² that varies less than 0.15%/°C from -30 to +70°C. The pyranometer uses a Double 2mm glass..
Spectrex 20/20MI Series Mini Triple IR (IR3) Flame Detectors
The Spectrex 20/20MI range includes the Mini IR3 Flame Detectors. These detectors offer a lower cost, lower power, compact design in a general purpose (non-Ex approved) flame detection. The Mini series flame detectors are ideal for indoor applications in locations such as transport terminals, storage areas, industrial kitchens and historical..
SQ-1009
24 event/digital channels with screw terminals..
SQ451
4 Channels. Universal inputs each V/C, thermistor or thermocouple ( max 1Hz)..
Squirrel 450/850 Series Data Logger
The Squirrel 450/850 series is a cost effective portable data logger with a maximum of 4 or 8 universal inputs. In common with its bigger brother, the Squirrel 1000 series data logger, the 450 and 850 series are equipped with impressive specifications, long battery life and a three year guarantee...
Squirrel OQ610 Temperature Data Logger
The OQ610 temperature data logger is suitable for a wide range of temperature recording applications in industry, research and development. It is available as a standalone temperature logger or as part of a complete system for through process monitoring in the food and paint industries. The OQ610 can accept up..
SRD-N16 Wall Mounted Data Logger
The SRD-N16 data logger is designed to record signal inputs and display current values in graphs and numeric form. The SRD-N16 is equipped with 1, 4 or 8 input channels, suitable for either temperature (PT100/500/1000 or Thermocouples) or analogue (0/4-20mA or 0-5/10V) inputs across all available channels. A pulse (digital)..
SSE232-1C0-10C-IA3-IS
Transparent Serial Server. 1 x RS232 & 1 x RS485 port. Up to 2 serial devices can be connected. 4 Digital Inputs and 4 Digital Outputs. Suitable for industrial applications...
SSE232-LE Serial to Ethernet Converter
The SSE232-LE is a Serial to Ethernet converter with a single RS232/RS485 serial port. The SSE232-LE allows for the remote communication of any serial device (RS232 or RS485) over a standard Ethernet Network. The SSE232-LE works as a transparent serial server to convert the serial string to an Ethernet TCP/IP..
SUBSEA-AH-NB160-IL300-15C
Subsea logger housing, aluminium, suitable for immersion to 300 metres seawater ( external case pressure 30 bar ). NB160 - nominal bore 160 mm. IL300 - internal length 300 mm. 15C - fitted with subsea Subconn bulkhead connector port x 15..
SUBSEA-SW2
Subsea switch assembly comprising of square mounting plate 200 x 200 x 8mm thick, 316 stainless steel, with rotating switch bar (190 x 50 x 25mm), fitted with 2 permanent magnet. Subsea housing with proximity switch mounted behind the square switch assembly with relay changeover contacts operated by proximity switch,..
SUBSEA-TEMP-SML-0-50C-MA-1/2NPTM-25mm-MCBH5M
Subsea Temperature Sensor Housing: SML - Small Housing 39.5mm Diameter, 86.5mm Housing Length Temp Range: 0-50C - Measurement Range: 0 to 50°C Output: MA - 2-Wire 4-20mA Output Signal Process Connection: 1/2NPTM - ½" NPT Male Thread Probe Probe Length: 25mm - 25mm Long Insertion Probe with Flat End, 19mm..
