WSR-8V
GEN II Wireless Sensor Receiver (WSR) unit with 8 input channels and 8 x 0.5V Outputs. Supplied with detachable antenna, built in rechargeable batteries (6 x NiMh AA batteries), MP12U AC power supply, LC-TX3 set-up leads, User Instructions and RxConfig software...
WTUNNEL-2002
wTunnel Transparent Wireless Tunnel Device. Power supply 10-30vDC, operating temperature -5 to +65°C, DIN rail mounting. 1 x RS232/RS485 serial port, 2 Digital Inputs and 2 Digital Outputs. 2.4GHZ Zigbee radio communications, maximum range 2KM line of sight...
XM279C
GSKIN Small Heat Flux Sensor. Heat flux range -150 to +150kW/m², min sensitivity 1.5µV/(W/m²), response time 0.7 secs. Plate sensing area is 4.4 x 4.4mm with a 0.5mm thickness. 1m cable terminated in a TEG connector suitable for attaching to a DLOG logger...
XO677C-TEMP
GSKIN Combined Heat Flux and Temperature Sensor. Heat Flux Range: -15 to +15kW/m², min sensitivity 7µV/(W/m²). Temperature Range: -30 to 70°C, accuracy: ±0.2°C (0-30°C), ±0.4°C (-20 to +60°C). Plate sensing area is 30 x 30mm with a 3.3mm thickness. 1.0m flying lead...
XPD12 Disc Mount Proximity Probe
Senturion Disc Mounted Eddy Current Probe Type XPD12. Low profile disc mounted probe with a tip diameter of 25mm. Measurement range of 0-12mm...
8801801015
WL420 Submersible Hydrostatic Level Transmitter. Depth Range 1mH2O. 2-Wire Loop Powered 4-20mA Output with a 12-36vDC Power Supply. 15m Polyurethane (PUR) Cable with Ventilation Tube. Over-Pressure 300% FS, Burst Pressure 600% FS. Stainless Steel Sensor with 105mm Body Length and 26.5mm Diameter...
CA-05/06
Rutland 505 Wind Turbine. with Horizontal-Axis Wind Turbine (HAWT) Design. Power Output: 3 Watts @ 5m/s, 60 Watts @ 15m/s. Voltage Output: 12V. Cut in Speed: 3m/s, Turbine Diameter: 510mm, Turning Radius: 304mm. Weight: 3.5Kg (net), Supplied with Marlec SMR1 12V Charge Controller and Manual...
HiTemp140-TSK Extreme Temperature Data Loggers
The HiTemp140-TSK Extreme Temperature Data Logger is a rugged, high precision, temperature data logger that is built for use in harsh environments. The stainless steel device is submersible and has an operating temperature range of -40 to +140°C. The logger comes with with a thermal shield allowing short-term temperature range..
OLCT100 Fixed Gas Detector for Refrigerant Gases
Designed for the detection of refrigerant gases, this detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). These detectors are ATEX approved and suitable for the detection of refrigerant gas leaks. The unit is also SIL 2 certified Hazardous Area Approved..
P.Touch Pressure Sensor
The P.Touch Pressure Sensor incorporates an integrated TFT touch display. This innovative design enables direct pressure readings on the sensor itself and allows for convenient adjustment of switching points using a virtual rotary wheel on the touch screen. The sensors are further enhanced by the inclusion of an IO-Link Communications..
Water Detection Alarm System WD-AMX
The WD-AMX range of water leak detection modules are designed for use with the WD-CS, WD-PS and WD-RS range of water leak detection sensors. They are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required...
WindSonic M Ultrasonic Anemometer
The Windsonic M Ultrasonic anemometer provides wind speed and direction in the range of 0-60m/s. The WindSonic M is a durable, hard-anodised aluminium alloy housing with an optional heating system allowing for operations down to -40°C. Readings can be provided as an RS232, RS422, or RS485 Serial or two analogue..
P.Trace Pressure Sensor
The P.Trace Pressure Sensor stands out as a compact and exceptionally robust solution, utilising a durable ceramic measuring cell. Enclosed in an IP68-rated stainless steel housing, it is designed to withstand harsh industrial environments and deliver reliable performance under continuous operation...
1-Wire Temperature and Humidity Sensor
The TSH202 is a digital 1-Wire environmental sensor combining capacitive humidity and band-gap temperature sensors with a 12-bit Analogue to Digital Converter for an accurate, calibrated output and fast response. Each TSH202 has a unique 64-bit serial code, allowing multiple sensors to be connected on a single bus, enabling scalable..
11220002
ComNav G2 GNSS Satellite with Compass Differential GPS (DGPS) correction and 30m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 90° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G2..
11220009
ComNav G1 GNSS Satellite Compass with 30m cable. Output: NMEA0183. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 45° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G1 contains a ComNav receiver module..
1360-PK-060
WindObserver Intrinsically Safe System with Low Voltage PSU. WindObserver IS Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind Speed 0-75m/s, Accuracy 2%, Wind Direction 0-360°, Accuracy ±4°. Low Voltage Power Communications Interface (LVPCI) Housed in 316 Stainless Steel Enclosure. Power Supply: 9-30vDC @ 200mA Max with Galvanic Isolation. RS422..
1416-PK-210-12
WindUltra Ultrasonic Heated Anemometer. Wind speed 0-75m/s, accuracy <2%, wind direction 0-360°, accuracy <1°. Output RS485, Modbus, NMEA and SDI-12. Operating Temperature -40 to +70°. Power Supply: 5 to 30vDC @ 7.6W. Thermoplastic and marine-grade Stainless Steel housing material with 1" Pole Mounting Adaptor and 2m M12 Cable. Dimensions: 81mm..
224-602
Therma-Hygrometer, 6000 model with integrated probe. Ranges -20 to +50°C and 0 to 100%RH. The unit incorporates a clear custom backlit LCD display that simultaneously shows both temperature and humidity readings. The units require 3 standard AAA batteries and have a minimum life of 10,000 hours, with an auto power..
271-101
The MicroCal 1+ thermocouple simulator and thermometer. Designed to simulate a chosen temperature to test thermocouple thermometers. It has 12 adjustable temperature point and incorporates a high accuracy thermometer. Comes with a five point UKAS Certificate of Calibration which indicates deviations from standards at the various points and a one..
271-302
3002 Dry-Well Calibrator. Suitable for providing a portable heat source for testing temperature probes over a temperature range of +33 to +300°C with a resolution of 0.1°C. Power supply 230vAC. Dimensions 57 x 125 x 158mm, weight 900g. Suitable for probe diameters of 3.3, 4.76, 6.35 and 9.6mm. Unit comes..
3103-N
PR3103-N Slim Series Isolated Repeater suitable for use in ATEX Zone 2 Environments. Isolation and 1:1 conversion of current signals within the range 0-20 mA, Response time: less than 7 ms, Accuracy 0.05% of span. Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing...
3225A-N
PR3225A-N Slim Series Universal Converter suitable for use in Hazardous Areas. Frequency Input: 0.001Hz to 100kHz. Output: 1 Analogue (Current: 0-20, 4-20, ±10mA, or ±20mA; Voltage: 0-5, 1-5, 0-10, 2-10, ±5, ±10vDC). Power Supply: 24vDC ±30%, via terminals only. 6mm Slimline housing...
400.0204
MC 4.0 Multiprobe Anemometer with 4.000mAh Lithium Polymer Battery & Lemo Connector. The MC 4.0 is the base unit and can be used for determining the flow velocity, temperature and relative humidity of gaseous and liquid media with the relevant measurement probes. 3.2" TFT Display, 2Hz measurement rate, internal logger..
