SGW1-4B0-00-IA3-MMP
Modbus Multiplexer and Converter. 4 x RS232/RS485 configurable ports, with 1 x USB port for configuration. DIN Rail mounted industrial enclosure with terminal blocks. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: 100 x 22.5 x 112mm. Operating Temperature: -15 to 65°C...
SII4R1
COM port redirector driver enables legacy serial software to gain access to the network. 1 seat. 1 virtual Serial COM...
SKYWATCH-33230
Skywatch Eole handheld meter for wind speed monitoring. Measuring Range: 2 to 150km/h, displayed in km/h, mph, m/s, fps, knots and bft. Instant, Max and Average (Selectable, 3 seconds to 24 hours) Wind Speeds. Polyethylene protection foam casing with Aluminium plate for tripod attachment (1/4" thread) and 54mm impeller with..
SKYWATCH-POUCH
Skywatch Pouch for Skywatch Eole, Meteos or Atmos..
Smappee Infinity Energy Monitoring
The Smappee Infinity system is an easy-to-use energy monitoring system for both residential and commercial applications. Supporting current measurements up to 10,000 amps as well as single, split, and three-phase systems...
SMARTLINK
SmartLink for Wireless Connectivity of PosiTector Sensors. PosiTector SmartLink and free mobile app allows your cell phone or tablet to become a virtual PosiTector display. Compatible with coating thickness, environmental and surface profile sensors. SmartLink Comes Complete with free PosiTector App, AAA battery, protective rubber holster, belt clip, wrist strap,..
Solid State Relay
The MPDCD3 is a PCB mounted solid state relay (SSR) suitable for switching power to DC devices. Operation voltage 3-32vDC, Load voltage 3-60vDC, maximum current 3A. SPST normally open or closed contacts...
SP Lite2 Silicon Pyranometer
The SP Lite2 Silicon cell photo-diode pyranometer offers an economical solution for the reliable routine measurement of incoming global solar irradiance. It has a conical diffuser that offers excellent directional (cosine) response, causes rain to run off and is easy to keep clean. The SP Lite2 can be used under..
SP-LITE
SP-LITE Pyranometer is suitable for solar irradiance measurements in spectral ranges of 400 to 1100nm up to a maximum of 2,000 W/m² with response time less than 1 seconds and typical sensitivity of 10µV/W/m² that varies less than 0.15%/°C from -30 to +70°C. The pyranometer uses a Double 2mm glass..
Spectrex 20/20MPI Polycarbonate Series Indoor Flame Detectors
The Spectrex 20/20MPI Commercial series is a compact, lightweight Mini IR3 Flame Detectors. These detectors offer a lower cost, lower power, compact design in a polycarbonate housing. The Mini series flame detectors are ideal for indoor applications in locations such as transport terminals, storage areas, industrial kitchens and historical and..
SQ Series Data Loggers with 8-16 Analogue Inputs
The SQ Series data loggers are a range of general purpose data loggers with universal inputs suitable for monitoring current, voltage, resistance, temperatures and digital channels for alarms and triggering. Loggers have 8 differential/16 single-ended, 8 digital state inputs and 4 digital outputs. The logger can be used as a..
SQ16
Squirrel SQ16 Data Logger, 8 differential or 16 single ended channels suitable for 2-Wire PT100, Thermocouples, V and mA inputs. 32 bit resolution, 4GB internal memory (200 million readings), 8 digital inputs and 4 digital alarm outputs. USB to PC connection & Bluetooth wireless interface, complete with SquirrelView, AA Batteries,..
SQ851
8 Channels. Universal inputs each V/C, thermistor or thermocouple ( max 1Hz)..
SRD-99 Data Logger Display Unit
The SRD-99 data logger is designed to record signal inputs and display current values in graphs and numeric form. The SRD-99 is equipped with 1, 4 or 8 input channels, suitable for either temperature (RTD or Thermocouples) or analogue (0/4-20mA or 0-10V) inputs across all available channels. A pulse (digital)..
SRT-N118 Temperature Meter
SRT-N118 LED temperature meter with a wall mountable IP65 enclosure. Large 20mm, 4 digit, red LED Digital Display. Accepts PT100, PT500, PT1000 and Thermocouples (type K, J, S, T, N, R, B or E) inputs and provides a RS485 Modbus RTU output with options for an isolated current output and..
SSE232-1083-ST-HT
Ethernet data acquisition unit, 8 digital / pulse inputs. Each channel may be configured for digital state or pulse input ( max 4Hz ). Internal back up battery stores pulse count if external power is lost. Unit publishes data to .web php page. Power supply 9-26vAC or 9-30vDC..
SSE232-1B0-00-LE
Transparent Serial Server. Single RS232/485 port and one RJ45 connector Ethernet 10/100 Base T port. Power supply 10-30vDC. Suitable for Low End applications...
SSE232-1B0-00-LE-WIFI
Transparent Serial Server. Single RS232/485 port and one RJ45 connector Ethernet 10/100 Base T port. Internal WiFi Antenna for 2.4Ghz 802.11b/g/n Wireless Connection. Power supply 10-30vDC. Suitable for Low End applications...
SSE232-1C0-00-2ETH-IA3-IS
Transparent Serial Server. Single Isolated RS232/485/422 port and two RJ45 connector Ethernet 10/100 Base T port. Power supply 10-30vDC. Suitable for industrial applications...
SSE232-1C0-00-IA3-IS
Transparent Serial Server. Single Isolated RS232/485/422 port and one RJ45 connector Ethernet 10/100 Base T port. Power supply 10-30vDC. Suitable for industrial applications...
SSE232-IA3 Industrial Serial Server
The SSE232-IA3 is an Ethernet communications devices designed to connect any serial device (RS232, RS485 or RS422) to a standard Ethernet Network. The SSE232 works as a transparent serial server to convert the serial string to an Ethernet TCP/IP or UDP/UP protocol. Units are available with a single isolated serial..
Subsea Temperature Transmitter
Subsea temperature sensor, with 316 stainless steel body suitable for external seawater pressure 400 bar, with Birns MCBH5M bulkhead connector. Accuracy 0.2% FSD...
SUBSEA-AH-NB100-IL300-2C
Subsea logger housing, aluminium, suitable for immersion to 300 metres seawater ( external case pressure 30 bar ). NB100 - nominal bore 100 mm. IL300 - internal length 300 mm. 2C - fitted with subsea Subconn bulkhead connector port x 2..
SUBSEA-DISP-HOUSING
Subsea display housing, with clear acrylic tube, internal diameter 75mm and internal length 225mm, suitable for a variety of LCD and LED indicators. With stainless steel endcaps and CRE bulkhead connector...
