9400B1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 750mm (±2mm) lengths and can be cut to size and fitted with additional end..
ACS-5050
The Stevenson type screen, or instrument shelter, shield data loggers against precipitation and direct heat radiation from outside sources, while still allowing air to circulate freely around it.This screen is big enough to accommodate two Tinytag Plus 2 sized data loggers...
B104456
Wall Mounted Enclosure with Window for MX43 Gas Controller. IP66...
SHOCK-MOUNT-OSB
OSB Shear Beam Load Cell. Shock Mounting Assemly option suitable for ranges 0-250Kg to 0-2000Kg...
9400B2
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 7.5mm (W x D). Supplied in 750mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400C2
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 7.5mm (W x D). Supplied in 500mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400C1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 500mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400D1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 250mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400D2
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 7.5mm (W x D). Supplied in 250mm (±2mm) lengths and can be cut to size and fitted with additional end..
9402
Additonal end covers for 9400 Power Rail. Kit includes a pair of end covers for a 9400 Power Rail...
CAB-3233
CAB-3233 is a 3-wire interface cable for the Tinytag Talk 2 voltage and current data loggers (1.5m length) for use with (TK-4702-PK, TK-4703-PK and TK-4802-PK)...
GD-72E
GEN II radio transmitter with wired connections for Littlemore Scientific light sensors (LS50 & LS70 modules) and RHT10D temperature and humidity probe. Temperature Range -40 to +120°C..
WIFIBM
2.4GHz Wi-Fi body mounted antenna. Dome shaped, robust waterproof housing...
9404
Module Stop for 9400 Power Rail. Provides support and secure mounted devices to power rail...
CAB-3239
Tinytag CAB-3249 Voltage/Current Input Lead for connection of voltage and current input signals to Tinytag data loggers. Includes a 5-pin connection to logger and 1m flying tails...
CAB-3246
Tinytag CAB-3246 Count Input Lead for connection of 2-wire input signals to Tinytag data loggers. Includes a 2-pin connection to logger and 1m flying tails...
ACS-6000
Trigger Start Magnet for various Tinytag data loggers. The magnet is ideal for delayed triggering of Tinytag loggers that have been set up for a trigger start. The magnet is merely passed over the correct location on the logger and the lights will start to flash showing that logging procedure..
1122449
Straight 4-pin M12 female mating connector. Connection secures with an M12 screw locking system. IP67 Protection rating...
133-158
General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 1 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-158..
1620-DIVIDER-SET
1620 Divider Set for the 1620 Pelicase. Includes velcro dividers and provides additional padded protection for your equipment. Comes with the convoluted lid foam..
1620-LID-ORGANISER
The 1620 Lid Organiser allows the space in the lid of your 1620 pelicase to be used to store various accessories and tools in small pockets. The organiser can be secured in place with the supplied screws into pre-moulded bosses inside the lid...
1660-DIVIDER-SET
1660 Divider Set for the 1660 Pelicase. Includes velcro dividers and provides additional padded protection for your equipment. Comes with the convoluted lid foam..
1660-LID-ORGANISER
The 1660 Lid Organiser allows the space in the lid of your 1660 pelicase to be used to store various accessories and tools in small pockets. The organiser can be secured in place with the supplied screws into pre-moulded bosses inside the lid...
1690-DIVIDER-SET
1690 Divider Set for the 1690 Pelicase. Includes velcro dividers and provides additional padded protection for your equipment. Comes with the convoluted lid foam..
