9400A
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 1m (±2mm) lengths and can be cut to size and fitted with additional end..
ACS-5001
Tinytag Alarm Box for use with Tinytag Plus 2 and Tinytag View 2 loggers to provide an audible warning when an alarm condition has been met. A pair of volt free changeover contacts are available with programmable delay (1 second to 11 days). A blanking plug in the side of..
ACS-9700
2-pin plug. Suitable for use with TGPR-0804, TGPR-1001 and TGPR-1201 communication interface and on various loggers for the temperature sensor inputs...
GL-70
GEN II radio transmitter with integrated Littlemore Scientific light (Visible and UV), temperature and relative humidity sensors. Temperature Range -30 to +65°C, Resolution 0.1°C and Accuracy ±0.4°C (5 to 40°C). Humidity Range 0-100%, Resolution 0.1% and Accuracy ±2% (10 to 90%). Visible Light Range 0-4,000 Lux @ 0.1 Lux resolution..
HMI5043N
HMI5043N graphic HMI 4.3 inch TFT colour touchscreen display. 2 serial ports, RS232 and RS485, power supply 24vDC@250mA, IP65 front panel. Fully programmable with graphic indicators, dials, bar graphs and process symbols, pop up alarms etc. 480 x 272 pixel resolution. 128MB flash memory, 64MB DRAM. Can act as MODBUS..
HYGR201
HygroAir 20 Temperature and Humidity probe with lemo connector for direct connection to the MC20 display. Humidity range 0 to 99.9%RH, accuracy ±1.8% at 10-90%RH. Temperature range -20 to 70°C, accuracy ±0.3°C at 0-40°C...
MPM-393 Connectors
Mating plug mPm-393 with 2m cable...
MULTIDIP
2.4GHZ WiFi antenna centre fed dipole 5m cable SMA..
PSU-01
AC Mains Adapter Power Supply, 12-32vDC...
SCREEN-MODEL-306
Stevenson screen to protect the air temperature probe from the affects of rain and wind on the temperature reading. The white UV stabilized thermoplastic discs offer a high reflectivity, low thermal conductivity and rugged weather resistance. Stainless Steel mounting bracket suitable for pipes up to 27mm, or direct connection to..
SHOCK-MOUNT
OBBS Bending Beam Load Cell. Shock Mounting Assemly option suitable for ranges 0-5Kg to 0-500Kg...
UA-KIT-USB-232
SenixView RS-232 Configuration Kit with USB adaptor for sensor setup or real-time monitoring. Kit comes complete with Serial RS-232 to USB converter, serial data cable, Interface board, Universal power supply and software CD (with SenixVIEW software, videos and drivers). Kit is also compatible with Universal Terminal Board and Universal Terminal..
ACS-9701
3 Pin Plug. Suitable for use with all Tinytag Ultra, Plus and View data loggers. For use with the communication interface...
HYGR202
HygroAir 20 Temperature and Humidity probe with 1.8m cable and lemo connector for direct connection to the MC20 display. Humidity range 0 to 99.9%RH, accuracy ±1.8% at 10-90%RH. Temperature range -20 to 70°C, accuracy ±0.3°C at 0-40°C...
UA-KIT-USB-485
SenixView RS-485 Configuration Kit with USB adaptor for sensor setup or real-time monitoring. Kit comes complete with Serial RS-485 to USB converter, Interface board, Universal power supply and software CD (with SenixVIEW software, videos and drivers). Kit is also compatible with Universal Terminal Board and Universal Terminal Board with Relays...
ACS-9703
A 5-pin plug which can be used to connect your own cable for Tinytag voltage and current data loggers. It can also be used to connect your own PT100/PT1000 probe/sensor with suitable Tinytag loggers...
9400B1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 750mm (±2mm) lengths and can be cut to size and fitted with additional end..
ACS-5050
The Stevenson type screen, or instrument shelter, shield data loggers against precipitation and direct heat radiation from outside sources, while still allowing air to circulate freely around it.This screen is big enough to accommodate two Tinytag Plus 2 sized data loggers...
B104456
Wall Mounted Enclosure with Window for MX43 Gas Controller. IP66...
SHOCK-MOUNT-OSB
OSB Shear Beam Load Cell. Shock Mounting Assemly option suitable for ranges 0-250Kg to 0-2000Kg...
9400B2
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 7.5mm (W x D). Supplied in 750mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400C2
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 7.5mm (W x D). Supplied in 500mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400C1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 500mm (±2mm) lengths and can be cut to size and fitted with additional end..
9400D1
9400 Power Rail distributes power to mounted 3100 Slim Series isolators. The Power Rail is supplied with cover and 2 end covers (1 right-hand and 1 left-hand). Dimensions: 35 x 15mm (W x D). Supplied in 250mm (±2mm) lengths and can be cut to size and fitted with additional end..
