X005-425
X005-425 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 4-20mA output. Tri-port isolation between power supply,..
X005-426
X005-426 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 20-4mA output. Tri-port isolation between power supply,..
X005-545
X005-545 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 0.5-9.5vDC output. Tri-port isolation between power supply,..
X005-546
X005-546 Galvanic Isolation Amplifier for use with Intrinsically Safe Position Sensors coded Z000. Power supply 12-30vDC. The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited 5vDC power supply to the sensor and amplifies the returned ratiometric output to a factory configured 9.5-0.5vDC output. Tri-port isolation between power supply,..
X101 Intrinsically Safe Linear Position Sensor
The X101 is an ATEX approved, Intrinsically Safe stand alone linear position sensor that is suitable for use in hazardous areas with potentially explosive gases or vapours. The X101 units are supplied with a ratiometric 0.5-4.5vDC output, calibrated to any travel distance between 50 and 600mm, and full EMC protection..
X101 Intrinsically Safe Linear Position Sensor
X101 Intrinsically Safe Linear Position Sensor for Hazardous Gas Atmospheres. Range: Any distance from 50 to 600mm. Galvanic Isolation Amplifier with -0.5 to 9.5vAC or 4-20mA outputs with cable length up to 1,000m. Electronics sealed to IP65 (connector)/IP67 (cable). The sensor is ATEX/IECEx approved to II 1G Ex ia IIC..
X603
X603 Quarter Wave Flexi Strand Radio Modem Helical Antenna with TNC male connection. Suitable for covering local sites where aerial size is a limiting factor...
X604
X604 Half Wave Mast mounted omni-directional Dipole radio modem Antenna with TNC Male connection. 0dB Gain. Suitable for general site coverage with a 360° radiation pattern...
X605
X605 Eight Element High Gain Yagi Radio Modem Antenna. 10dB Gain. This type of antenna concentrates the signal into a 40° beam. Suitable for outstations sending readings back to an omni directional antenna at the base station or between two fixed locations...
X7301-100
CCTV Video Bridge - 1 Channel, 100mW, 1.394GHz . Range 500-1Km Line of Sight, IP67 Enclosure. External Antenna,..
X7301-500
CCTV Video Bridge - 1 Channel, 500mW, 1.394GHz. Range 1-2Km Line of Sight..
XR-440-M
Pace XR-440 Pocket Logger, 4 analogue inputs, resistance or 0 - 5vDC, 86,016 reading memory at 12 bit resolution, data logging rate programmable from 200Hz to 12 hours, battery life 2 years, operating temperature -40 to + 60 C. Each Pocket Logger includes battery, terminal block and Certificate of Validation..
XR450 Data Logger
The XR450 Pocket Logger is a 4 channel compact data logger designed for standalone monitoring of temperature, humidity, light, AC/DC current and voltage, analogue, digital and inputs from any PACE sensors. The low power design makes this ideal for remote installations using single or multiple loggers. Selectable logging rates from..
XR5 Data Logger
The XR5 data logger is a compact logger with 8 analogue and 3 digital channels. Logging rates are programmable from 1Hz to 24 hours, with a fast mode logging up to 1000Hz. Logging modes include manual start, external trigger and log on alarm. The resolution is 12 bit and battery..
XR5-SE
XR5 8 channel logger. 8 chan Input range 0 - 2.5 volts or 5 V, resistance/temperature/2.5v I/P. With 2.5v & 5v channel excitation and SMS text messaging. Memory 64K. Also 3 digital I/O, configurable as 3 pulse external trigger or alarm O/P..
XR5-SE-M
XR5 8 channel logger. 8 chan Input range 0 - 2.5 volts or 5 V, resistance/temperature/2.5v I/P. With 2.5v & 5v channel excitation and SMS text messaging. Memory 256K. Also 3 digital I/O, configurable as 3 pulse external trigger or alarm O/P..
YAGIGSM8
8 Element GSM Yagi antenna, 868 MHz, with 2 metres cable and SMA connector..
ZU-PW10W
Power Supply, 12vDC @ 10W suitable for BMCM DAQ Measurement Systems...
ZU-PW40W
Power Supply, 24vDC @ 40W suitable for BMCM DAQ Measurement Systems...
ZU-PW70W
Power Supply, 24vDC @ 70W suitable for BMCM DAQ Measurement Systems...
ZU-SCHI
ZU-SCHI is used for DIN rail mounting for the LAN-AD16f, USB-AD12f, USB-AD16f, and BP16 modules..
ZU37BB
Analogue connection board for LAN-AD16F, USB-AD16F, USB-AD12F, USB-AD DAQ units. With 16 bannana connectors..
ZU37CB
Analogue connection board for LAN-AD16F, USB-AD16F, USB-AD12F, USB-AD DAQ units. With 16 bannana connectors and 16 screw terminal blocks..
