MINIJU214
MiniAir20 Micro vane anemometer. Air velocity range 0.7-40m/s with accuracy ±2% of full scale, ±5% of reading. Sensing head 11mm diameter x 15mm, probe length 165mm. Sensor is supplied with 1.8m cable and connector for interfacing with MiniAir Junior display. Plastic sensing head with Aluminium blade turbine suitable for non-aggressive..
MINIJU222
MiniAir20 Mini vane anemometer. Air velocity range 0.4-20m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 22mm diameter x 28mm, probe length 175mm. Sensor is supplied with 1.8m cable and connector for interfacing with MiniAir Junior display. Plastic sensing head with Aluminium blade turbine suitable for non-aggressive..
MINIJU224
MiniAir20 Mini vane anemometer. Air velocity range 0.5-40m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 22mm diameter x 28mm, probe length 175mm. Sensor is supplied with 1.8m cable and connector for interfacing with MiniAir Junior display. Plastic sensing head with Aluminium blade turbine suitable for non-aggressive..
MINIJU232
MiniAir20 Macro vane anemometer. Air velocity range 0.3-20m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 85mm diameter x 80mm, probe length 225mm. Sensor is supplied with 1.8m cable and connector for interfacing with MiniAir Junior display. Plastic sensing head with Aluminium blade turbine suitable for non-aggressive..
MINIJU234
MiniAir20 Macro vane anemometer. Air velocity range 0.4-40m/s with accuracy ±1% of full scale, ±3% of reading. Sensing head 85mm diameter x 80mm, probe length 225mm. Sensor is supplied with 1.8m cable and connector for interfacing with MiniAir Junior display. Plastic sensing head with Aluminium blade turbine suitable for non-aggressive..
MiniWater Snap Heads
The MiniWater Snap Heads are designed to be snapped on to the MiniWater anemometer handles and can be replaced on site quickly without any need for re-calibration or adjustment. Allowing a turbine to be quickly replaced during monitoring, if one has become tangled with weeds or debris in the water..
MINIWATER6MINIHIRE
MiniWater6 probe range 0-5 M/Sec water velocity with SQ2010 logger, and telescopic probe. Complete with software and carry case. Hire charge per week..
Minol Compact Heat Meter
Minocal Compact MID Approved kWh Heat Meters with 1.5m PT500 temperature probe and Tee ball valve. Suitable for heating or cooling applications with a temperature range of 15 to 150 C (meter max 90 C). Units are fitted with an integrated, or detached, LCD multifunction display with a pulse or..
Modbus TCP to DF1 Converter
This device shortens the gap between your pre-existent Modbus TCP application and any DF1-enabled device. This is an easy to use Modbus TCP to DF1 Gateway, designed to gain access to a PLC with DF1 connectivity using any Modbus TCP device. Protocol conversion is based on an easy-to-fill set-up web..
MOUNTBASE-DSCRC
Mounting Base for DSCRC Series. Range 0.2 to 2kN...
MPM4730[0-100MPA]-E-R4-22-M12-C2-G
MPM4730 Programmable Pressure Transmitter with 0-1,000 Bar basic range. 2 Wire, 4-20mA output plus RS485 serial comms. 4 Pin M12 electrical connection with ¼" BSP process connection. Programmed pressure range available from 0-200 Bar up to 0-1,000 Bar...
1416-PK-011
WindUltra 8-Pin M12 Connector with 2m of cable. Suitable for connecting the WindUltra sensor to Power and Serial Output...
17131038-2
Replacement Extended Range Li-ion Battery Pack for MX6 gas detector, UL/CSA/ATEX/IECEx/INMETRO/GOST Certified battery pack...
1733-PK-041
Replacement MetConnect Temperature and Humidity Sensor. Replacement Sensors are a direct replacement for the original supplied sensor and can be fitted into the screen and to the same M12 Connector on the MetConnect Hub Box under the mounting bracket as the existing sensor...
1771-PK-116
Anodized Aluminium Bracket with 316 grade Stainless Steel sensor mount with isolation gasket to reduce corrosion. The Bracket uses a mounting clamp suitable for attaching to a vertical pipe with a diameter of 30-58mm. When mounting the WindObserver, consider the position, orientation and alignment of the unit. Mount at the..
1957-PK-151
Maximet Marine 8-Pin M12 Connector with 2m of cable. Suitable for the GMX560 Weather Station for Power and Serial Communications...
31220011
G1/G2 (B) Deck Mount Hardware Kit..
5200-07S-BR
Set of two blocking rings for resealing pipework when flow meters are removed. Suitable for CDI-5200-07S flow meters..
6797910
19" 6U Wall-Mounted Metal Enclosure for two MX52. IP55, with window door...
812-007
M12 - U-bolt with a 90mm arc diameter. Order 4 per mounting kit...
832-015
Stainless Steel wall bracket for the 9200 series pressure manometers. Suitable for 9205, 9215, 9230 and 9275 models...
8813002001
LogBox-AA IP65 Data Logger, 2 Analogue Channels for PT100, Thermocouples (types J, K, T, E, N, R, S or B), Voltage (0 to 50mV or 0 to 10V), or Current (0 to 20mA or 4 to 20mA). with 64,000 reading memory, battery life up to 3 years. Sensor external power..
CLAN-1520-XF
cLAN Ethernet Data Logger. 2 RS232/485 Port for connecting serial devices to embedded Modbus Master for I/O Expansion, NMEA0138 or Gill Instruments WindSonics and MetPak weather stations. Event logging and Real Time Clock. Power Supply 10 to 30vDC. Dimensions: 85 x 105 x 60mm...
GS-42
GEN II radio transmitter with wired connections for up to 2 voltage/current inputs. Selectable ranges 0-100mV, 0-1vDC, 0-10vDC, 0-20mA, 4-20mA plus EU scaling configured using DARCA software. The GS-42 can also provide a 5 or 12V sensor supply. Supplied with 4 x AA Alkaline batteries and stub antenna...
