PB-135-OQ
Stainless Steel Thermal Barrier for OQ610-S data loggers. Dimensions: 230mm x 320mm x 135mm, weight 10Kg approx. Thermal capacity of 4.5 Hrs at 100°C or 1.5Hrs at 300°C (max internal temp 70°C)...
PB-5002-3M
Fast Response Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 100mm long and 3.3mm in diameter with a 3m cable. Temperature range -40 to 125°C with a 10 second response time in water...
QT-C-212
SafEye Quasar 902 Transmitter Unit. Range 15-40m. Warm up time: 30 seconds. Xenon Flash Infrared Source, emits IR radiation pulse at a rate of 2 pulse per second. Pulse width of 5-10µsec. ATEX/IECEx Approved Ex d e ib [ib Gb] IIB+H2 T4 Gb, Ex tb IIIC T135°C Db. IP66 and..
1120 Peli Case
The 1120 Peli case is a small protective carry case which is IP67 rated and can be supplied with the Pick N Pluck foam insert. Cases are available in black, orange or yellow with standard interior dimensions of 188L x 125W x 76H. The 1120 is suitable for use with..
MAP-K-G6-3
Air Temperature probe with clamp 6.0m PTFE coated, triple insulated cable. Suitable for use with magnetic substrate materials..
PB-5002-5M
Fast Response Thermistor Probe with moulded handle and connector (IP68 rated). The stainless steel probe is 100mm long and 3.3mm in diameter with a 5m cable. Temperature range -40 to 125°C with a 10 second response time in water...
OLCT10-514
OLCT10 Fixed Gas Detector for R410A Refrigerant Gas Range 0-1000ppm. Output 4-20mA. Power supply 15-30vDC, consumption 100mA max. Operating temperature -10 to +60°C. Life span 24 months. Plastic housing, 118 x 126 x 63mm, IP65...
40/40-001
Stainless Steel Tilt Mount for 40/40 SharpEye Flame Detectors...
AP-PC-KIT
PC Kit supplied with PC software and USB cable. Suitable to connect and configure Aquaprobe sensors on a PC...
AquaSonde Vent/Data Hub
AquaSonde Vent/Data Hub is a termination hub that allows a vented cable and desiccant bottle to be attached. Allowing the sensors vent tube to be protect from moisture build up and provides access to the data collected from a Leveline or Aquaread sensor. It can also be used to allow..
AQUATEL-DATA-12M
AQUATEL-DATA-12M is a 12 month subscription for data hosting on the web platform for the Aquatel telemetry units...
AQUATEL-SIM-12M
AQUATEL-SIM-12M is a 12 month subscription for Aquatel telemetry units (UK only)..
AS-VDH
AquaSonde vented desiccant hub. A termination device for the vented cable that allows a desiccant bottle to be attached and provides a USB port for data retrieval and a visual indication of AquaSonde health, battery and memory condition...
DEPLOYCORD-10
10m non-stretch Kevar deployment cord including two carabiner clips...
DEPLOYCORD-20
20m non-stretch Kevar deployment cord including two carabiner clips...
DEPLOYCORD-30
30m non-stretch Kevar deployment cord including two carabiner clips...
DEPLOYCORD-50
50m non-stretch Kevar deployment cord including two carabiner clips...
EX-LL-5M
EX-LL-5M is a 5 meter cable for non-vented LeveLine sensors. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers...
EX-LL-5M-V
EX-LL-5M-V is a 5 meter cable for gauge LeveLine sensors and includes a vent tube. Cable comes complete with AquaConn connectors, suitable for direct connection to Aquatel, Bluelink or Leveline Loggers. (Desiccant recommended to prevent moisture entering vent tube)...
EX-TDH
Extension cable desiccant housing. For use with vented extension cables. Requires desiccant cartridge...
FH3.3/020
External Plug-in Relative Humidity Sensor for MSR Data Loggers, IP60 Rated. Relative Humidity Range: 0 to 100%RH, Accuracy ±1.8%RH (10...85%, 0...+40°C) & ±4%RH (85...95%, 0...+40°C). 0.2m black cable suitable for use up to +75°C (white cable up to +200°C available on request). A maximum of 5 pre-calibrated sensors can be..
LL-EXT-TEL-AD
Eextension lead to flying lead adapter for telemetry. Can be used with the LeveLine extension lead to be connected to telemetry, or other, data loggers...
LL-MINI-ABS-010
The LL-MINI-ABS-010 is a precise water level and temperature sensor designed for diverse seawater and surface water applications. Encased in a sealed unit, it integrates temperature and water level sensing capabilities. The LL-MINI-ABS-010 includes an Absolute piezoresistive ceramic pressure sensor suitable for a 10m water depth range. (Non-vented cable required)...
LL-MINI-ABS-020
The LL-MINI-ABS-020 is a precise water level and temperature sensor designed for diverse seawater and surface water applications. Encased in a sealed unit, it integrates temperature and water level sensing capabilities. The LL-MINI-ABS-020 includes an Absolute piezoresistive ceramic pressure sensor suitable for a 20m water depth range. (Non-vented cable required)...
