400.0901
Volatile Organic Compound Probe for Lab 4.0. Ethanes, molar fraction 5ppm. Isopropenes, molar fraction 10ppm. Ethanol, molar fraction 10ppm. Acetones, molar fraction 50ppm. CO, molar fraction 15ppm...
60990003
ΒΎ" BSP Inlet and Outlet Pipe Set for F.Core Flow Sensor...
6313963
8 Relay module for the MX32 v2 & MX43 Gas Controllers. Output module includes 8 relay outputs with 2 additional logic inputs. MX32 v2 can manage up to 16 external relays and the MX43 up to 24 external relays...
6451442
2 Channel Input Card for the MX52 Gas Detection Control Unit. Suitable for 2 x 4-20mA gas sensor inputs...
8032204024
N322 Electronic Thermostat for Cooling/Heating Control with Single SPDT Relay Output, Max 250vAC @ 16A. Direct Switching of compressor or electrical heater with simple ON/OFF control and a second SPST-NO Relay (Max 250vAC @ 3A) suitable for additional control or alarm. Accepts Thermocouple (Type J, K or T) Input. Measurement..
877263
ABS Plastic Protective Cover for Next Generation 40/40 SharpEye Flame Detectors. Protects the detector from extreme weather conditions, such as heavy snow and heavy rain...
8803126430
RHT-DM-485-LCD 250mm Duct Mounted Temperature and Relative Humidity Transmitter with LCD Display and RS485 Modbus Output. Readings for Air temperature, Relative humidity and calculated Dew point values. Display can show two values, or temperature on its own. Temperature Range: -40 to +100Β°C, Relative Humidity Range: 0 to 100%RH and Dew..
8804151001
RHT Climate-DM-150S-485 Duct Mounted Temperature and Relative Humidity Transmitter with 150mm Stainless Steel Probe. Two analogue outputs, configurable as 4-20mA or 0-10V for any sensor or calculated psychromatic readings. Two configurable alarm outputs and RS485 Modbus Comms. Temperature Range -40 to +100Β°C, Relative Humidity Range 0 to 100%RH. Power Supply..
95.0011
MiniWater 20 Micro vane anemometer. Flow velocity range 0.05-10m/s with accuracy Β±2% of full scale, Β±3.5% of reading. Sensing head 11mm diameter x 15mm, probe length 165mm. Sensor is supplied with 1.8m cable and connector for interfacing with MC20 and MC 4.0 Displays with Lemo Connectors. Plastic sensing head with..
95.0385
MiniAir20 EEX Micro Vane Anemometer. Plastic measuring head, designed as a snap-on head with aluminium vane and shaft. Suitable for media temperatures up to 140Β°C. Range 0-40m/s with a Β±1.0% FS accuracy. Probe head dimensions 11mm diameter x 15mm with a probe length of 165mm and 1.8m cable with connector..
ACS-0021
Replacement Large Rogowski Coil (175mm loop diameter). Can be used with any of the Tinytag Energy Logger...
ACSRF-4040-PK-A
Tinytag Radio Receiver Unit complete with software, Internal buffer memory for up to 45 hours, 90mm stub antenna user replaceable akaline battery size AA (x2) powered via the RJ45 port, Operational temperature range: -15 C to +60 C, Waterproof IP67 housing, dimension 140 x 155 x 80mm (including aerial) Weight:..
BATT-12V-80AH-PELI
Rechargeable battery pack, 12v, 80 amp hour, LiFePO4, operating temperature -20 to +60 deg C, with short circuit, over charge and discharge protection, self discharge rate 0.5% per day. Fitted in IP65 Peli case. With charge indicator. Supplied with smart charger. Weight: 10.7kg. Dimensions: 361 x 289 x 165mm..
BETA-PULSE-OPTION-K=10
Pulse output option for Beta water meters 10Ltr/pulse. Not available on larger 50mm diameter flow meters...
CA-11/44
HRDi voltage controller for the FM910-4 wind charger, 12/24V. Provides overvoltage protection and will slow turbine when batteries are full. Full LED display reading charge currents and battery voltages over up to 2 separate battery banks...
CA-12/16
Stainless steel tube pre-drilled at one end to suit a Windcharger for customers to adapt to own tower design. 500mm Length Stainless Steel Tube suitable for Rutland 504 Windcharger...
CabU_3m_RJ11
1-Wire interface cable with RJ11 connectors. Cable length 3m. The CabU_3m_RJ11 cable can also be used to add one of the 1-Wire sensors with screwless terminals to a network by using the SPL2_RJ11 cable...
CAP-K-G3-3
Air Temperature probe with clamp 3.0m PTFE coated, triple insulated cable. Suitable for use with all substrate materials..
EL-PROBE-EXTENDER-3M
3m Thermistor Probe Extension Cable. Male 3.5mm Jack to Female 3.5m Socket with Gold Plated Connections to limit signal loss. Suitable for use with EL-P-TP, EL-P-TP+ and EL-P-VAC Thermistor Probes..
ETH-E
Ethylene Propylene seal material, replaces standard Viton seal..
EX-10
AQUAPLUS 10m Extension Cable. Connectors are suitable for 10m submersion..
GS-CO2-S-UN-LED
GS-CO2 Space Mounted Carbon Dioxide Transmitter with LEDs. Measurement Range: 0-2,000ppm. 3-colour LED indication: Green <1,000ppm; Amber 1,000 to 1,500ppm; Red >1,500ppm. Output: 4-20mA or 0-10vDC selectable. Power supply: 24vDC. IP30 Flame retardant ABS housing, dimensions 115 x 85 x 30mm...
KTC-SURFACE-5MFL
K type thermocouple, surface mount 13mm x 25mm, measurement range up to -40 to 350 deg C with 5 M stainless steel overbraided cable...
LEO2-1-30BAR-1/4BSP
LEO 2 Digital Manometer with digital display. Pressure range -1 to 30 Bar with 10mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16"-20 UNF male connection with ΒΌ" BSP swivel adapter...
