ThermoAir 4 Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from ...
Stainless Steel Temperature and Humidity Probe for Lab 4.0. Temperature Range -40 to 85°C, Accuracy ±0.1°C. Humidity Range 0 to 100%RH, Accuracy ±1.5% at 10-90%RH. ...
AP-5000 Ammonium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-8,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Probe will also monitor Ammonia when used in combination with pH and temperature readings on the AP-5000 Aquaprobe sensor ...
AP-5000 Calcium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-1,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-CAL is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
AP-5000 Chloride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-19,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). The 5000-CHL is designed for use with the AP-5000 Aquaprobe sensor ...
AP-5000 Fluoride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-FLU is designed for use with the AP-5000 Aquaprobe sensor with pH probe. Readings may be affected by Hydroxide ions. ...
AP-5000 Nitrate Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-29,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.5 ppm. The 5000-NIT is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
PR5104B Single Channel Repeater/Power Supply suitable for hazardous area applications. Single Channel, ATEX II (1) GD, with 2 x 4-20mA inputs, 24-230 vAC/DC power supply, provides 18V loop power to transmitters via zener barrier and 2 x isolated 4-20mA O/P s to external devices. ...
The 6185 is a loop powered isolator suitable for the galvanic separation of analogue current signals with a straight 1:1 conversion of 0-20mA inputs. The 6185 is available in single, dual and four channel versions with a slimline 3185 series available in single and dual channel versions, all with no ...
4 Relay module for the MX32 v2 & MX43 Gas Controllers. Output module includes 4 relay outputs with 2 additional logic inputs. MX32 v2 can manage up to 16 external relays and the MX43 up to 24 external relays. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 8-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-35vDC power supply. Single channel unit for TC or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
2-Wire programmable transmitter with HART Protocol and an 8-35vDC power supply. Dual channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with HART Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
PR6337D Intrinsically safe 2-Wire programmable transmitter with HART 7 Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
ThermoAir 4 Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from 0 to +60°C. The associated cable for connection to the remote transmitter has a total length of 1.5m. Thermo-electric anemometer suitable for dry instrument air ...
Stainless Steel Temperature and Humidity Probe for Lab 4.0. Temperature Range -40 to 85°C, Accuracy ±0.1°C. Humidity Range 0 to 100%RH, Accuracy ±1.5% at 10-90%RH. ...
AP-5000 Ammonium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-8,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Probe will also monitor Ammonia when used in combination with pH and temperature readings on the AP-5000 Aquaprobe sensor ...
AP-5000 Calcium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-1,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-CAL is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
AP-5000 Chloride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-19,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). The 5000-CHL is designed for use with the AP-5000 Aquaprobe sensor ...
AP-5000 Fluoride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-FLU is designed for use with the AP-5000 Aquaprobe sensor with pH probe. Readings may be affected by Hydroxide ions. ...
AP-5000 Nitrate Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-29,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.5 ppm. The 5000-NIT is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
PR5104B Single Channel Repeater/Power Supply suitable for hazardous area applications. Single Channel, ATEX II (1) GD, with 2 x 4-20mA inputs, 24-230 vAC/DC power supply, provides 18V loop power to transmitters via zener barrier and 2 x isolated 4-20mA O/P s to external devices. ...
The 6185 is a loop powered isolator suitable for the galvanic separation of analogue current signals with a straight 1:1 conversion of 0-20mA inputs. The 6185 is available in single, dual and four channel versions with a slimline 3185 series available in single and dual channel versions, all with no separate power supply and a low voltage drop of less than 1.8vDC. ...
4 Relay module for the MX32 v2 & MX43 Gas Controllers. Output module includes 4 relay outputs with 2 additional logic inputs. MX32 v2 can manage up to 16 external relays and the MX43 up to 24 external relays. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 8-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-35vDC power supply. Single channel unit for TC or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
2-Wire programmable transmitter with HART Protocol and an 8-35vDC power supply. Dual channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with HART Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
PR6337D Intrinsically safe 2-Wire programmable transmitter with HART 7 Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
ThermoAir 4 Directional Thermal-Electric Directional Anemometer with Barometric Pressure Compensation. Sensing head 8mm diameter, handle 15mm diameter, probe length 300mm. The required diameter of the retraction opening for the probe is 9mm. Air Velocity Range: 0.015-1m/s. Accuracy ±1.0% of full scale. The sensor can be used at temperatures from ...
Stainless Steel Temperature and Humidity Probe for Lab 4.0. Temperature Range -40 to 85°C, Accuracy ±0.1°C. Humidity Range 0 to 100%RH, Accuracy ±1.5% at 10-90%RH. ...
AP-5000 Ammonium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-8,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Probe will also monitor Ammonia when used in combination with pH and temperature readings on the AP-5000 Aquaprobe sensor ...
AP-5000 Calcium Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-1,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-CAL is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
AP-5000 Chloride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-19,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). The 5000-CHL is designed for use with the AP-5000 Aquaprobe sensor ...
AP-5000 Fluoride Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.05 ppm. The 5000-FLU is designed for use with the AP-5000 Aquaprobe sensor with pH probe. Readings may be affected by Hydroxide ions. ...
AP-5000 Nitrate Electrode with 2 Auto-Range scales 0-99.9 mg/L (ppm) or 100-29,999 mg/L (ppm). Accuracy ±10% of readings or 2ppm (whichever is greater). Minimum Level of Detection 0.5 ppm. The 5000-NIT is designed for use with the AP-5000 Aquaprobe sensor with pH probe. ...
PR5104B Single Channel Repeater/Power Supply suitable for hazardous area applications. Single Channel, ATEX II (1) GD, with 2 x 4-20mA inputs, 24-230 vAC/DC power supply, provides 18V loop power to transmitters via zener barrier and 2 x isolated 4-20mA O/P s to external devices. ...
The 6185 is a loop powered isolator suitable for the galvanic separation of analogue current signals with a straight 1:1 conversion of 0-20mA inputs. The 6185 is available in single, dual and four channel versions with a slimline 3185 series available in single and dual channel versions, all with no ...
4 Relay module for the MX32 v2 & MX43 Gas Controllers. Output module includes 4 relay outputs with 2 additional logic inputs. MX32 v2 can manage up to 16 external relays and the MX43 up to 24 external relays. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 8-28vDC power supply. Single channel unit for PT100/PT1000, Ni100 or Resistance input, producing a 4-20mA output. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with a 7.2-35vDC power supply. Single channel unit for TC or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
2-Wire programmable transmitter with HART Protocol and an 8-35vDC power supply. Dual channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Intrinsically safe 2-Wire programmable transmitter with HART Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
PR6337D Intrinsically safe 2-Wire programmable transmitter with HART 7 Protocol and an 8-28vDC power supply. Single channel unit for RTD, TC, Ohm or mV input, producing a 4-20mA output. 1.5kvAC galvanic isolation. Can be mounted vertically or horizontally on a DIN rail. ...
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
