MX16-A-001-0-0-0
MX16 Gas Detection Controller configured for 4-20mA Analogue Input Gas Detector. Pre-Configured for Methane (CH4) with a range of 0-100%LEL. 2 Alarm levels (Al1, Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions 265 x..
MX16-N-001-1-0-0
Easy Duo MX16 Gas Detection Controller with OLCT10N for CH4 (Methane) fitted with 10m cable. Range 0-5% Volume. RS485 Modbus Comms, 2 Alarm levels (Al1 and Al2) + 1 fault, with Dry Contact Relays. LCD back-lit display. IP55 Enclosure with 3 x M16 and 2 x M20 cable glands. Dimensions..
N1040I-RA-485
N1040i Universal Process Indicator with one alarm relay (SPDT) and one 4-20mA output plus RS485 serial communications. Suitable for PT100, Thermocouples, 0/4-20mA, 0-50mV and 0-5/10V inputs. Programmable via front keypad and bright LED display. Power Supply: 100-240vAC, 48 to 240vDC...
Novus Cloud Devices
NOVUS Cloud is a platform focused on Internet of Things solution that expands the horizons of data viewing. Combined with NOVUS devices, this platform receives, stores, analyses and displays on dashboards measurements of room temperature, humidity, weather stations or any other variable of interest. Data access via the Internet is..
OBUG Single Point Platform Load Cell
The OBUG series of load cells are single point load cells designed for applications where the point of application of the load or force may vary. Single point load cells are primarily designed for the platform type weighing scales where applications are diverse, ranging from weighing a single diamond to..
OMNI-TM-8812 Ultrasonic Thickness Gauge
The TM-8812 is a handheld microprocessor-controlled ultrasonic thickness gauge specifically designed to measure the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass, plastics and other good ultrasonic wave conductors, as long as they have parallel top and bottom surfaces. This gauge can be used to determine..
PL-525-0.1-V
PL-525 Relative Low Range Pressure Transmitter. Range 0 to 100mBar. Power Supply 12-33vDC, output 0-10vDC. IP65 stainless steel casing with ½" BSP male thread pressure connection, ceramic diaphragm and DIN connector. Operating temperature range -15 to +80°C...
PL-692-0.1-V
PL-692-0.1-V differential pressure transmitter suitable for liquids, steam and gases. Pressure range 0-100mBarD over a 0-10V output with 18-33vDC power supply. IP65 stainless steel casing with a pair of 6mm compression pressure connection, ceramic Al2O3 (96%) diaphragm and 1.5m flying lead. Operating temperature range -15 to +85°C...
Reference Calibration Thermometer
A Reference Calibration Thermometer is used for calibration testing. Our unit features a high-accuracy PT100 probe for completing calibration tests on a range of thermometers and probes. The PT100 probe covers a temperature range of -199.99 to 199.99 °C and displays readings with a resolution of 0.01 °C. The reference..
RWS-05 Remote Weather Station
Complete Remote Weather Station with a GSM/GPRS logger and wind speed and direction sensor. This weather station is based around the GRD3305-XF datalogger, which will send the data directly to a web server running the Middleware software, or our own M2M web interface. Data is sent in real-time to the..
RX250-AL
GEN II Receiver logger for up to 250 channels over 125 transmitters. Dual RS232 serial ports, alarm and GSM text output, LCD display, internal memory for 247.000 readings and 24 hour built-in standby battery (6 x NiMh AA batteries). Supplied with LC68 lead, MP12U AC power supply, detachable antenna, LC-TX..
SGA Series – Analogue Strain Gauge Signal Conditioning Amplifier
The amplifier module is primarily intended for use with strain gauge based transducers. It provides both the excitation supply for the transducer and conditions the signal to provide standard voltage or current outputs. Physically, it is constructed on a single PCB and can be mounted in an enclosure or supplied..
SGW1-IA2-MMP Modbus Multiplexer
The SGW1-IA2-MMP Modbus Multiplexer is capable of connecting up to 3 RS232 Modbus ASCII/RTU devices to single RS485 Modbus ASCII/RTU device transparently. The unit has four independent serial ports that can be connected to a Master or Slave unit with different baud rates or Modbus protocols (ASCII or RTU). The..
Sharpeye Flame Simulator
Flame simulators allow you to fully test the function of your flame detection system under real fire conditions without the associated risks of an open flame. The Spectrex range of FS-1X00 flame simulators covers the full range of IR, UV/IR, IR3 and IR4 flame detectors. Each flame simulator covers a..
SOL-CSA-OMNI-0030
Switch to logger cable for SW2 unit. 5 metre cable fitted with a Birns MCIL5M on switch end and a Birns SCIL4F on the logger end...
SWS-W510 Large Digit Panel Indicator
Large-size (100mm high digits) simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the RS-485 serial interface link..
Temperature Controller N960
Great substitute for the old and obsolete analog controllers for holding extreme simplicity in operation and yet featuring the highly accurate performance of digital technology. The 20mm high display can be viewed from far away and the big functional keyboard can be operated by users wearing gloves..
TG-4081
Tinytag Transit 2 (TG-4081) Temperature Logger in an unobtrusive grey case. Temperature range -40 to +70°C. Memory 8,000 readings with delayed and magnetic switch trigger start options, plus 2 programmable alarms. Logging intervals 1 sec to 10 days with min, max & actual readings. Data can be downloaded via the..
TGE-0010-SPK
TTinytag TGE-0010 CO2 data logger starter kit. 32,000 reading memory, self calibrating NDIR Infra-red CO2 sensor with a measuring range of 0 to 2,000ppm. TGE-0010 comes complete with a (UK, EU & US) mains power supply, back-up battery, Software CD and download cable...
TGP-4500
Tinytag Plus 2 TGP-4500 Outdoor Temperature & Relative Humidity Logger with internally mounted NTC thermistor and capacitive humidity sensor. Temperature range -25 to +85°C with a 0.01°C resolution, Humidity range 0 to 100%RH with a 0.3%RH resolution. Memory: 32,000 readings. Replaceable internal battery. Logging rate 1 second to 10 days..
TGP-4703-ED
Tinytag Plus 2 Voltage data logger. Range 0-2.5vDC. Memory for 32,000 readings with 2 programmable alarms. Logging rate 1 sec to 10 days with min, max & actual readings, battery life up to 2 year. Splash proof I.P. 65 case. Unit is supplied with the Current/Voltage input cable, CAB-3239. Custom..
TGRF-4704-A
Tinytag Plus Radio Data Logger for One 25V Voltage Input. Measurement Range: 0 to 25V, Resolution 1mV. Logging Interval: 2 mins to 10 day with 2 Fully Programmable, Latching Alarms, with 1 sec to 10 days Alarm Delay. Red LED and Tinytag Explorer Connect Warnings with Email and SMS options...
TGU-4500
Tinytag Ultra 2 TGU-4500 indoor temperature & humidity logger with internally mounted NTC thermistor and capacitive humidity sensor. Temperature range -40 to +85°C with a 0.01°C resolution, Humidity range 0 to 95%RH with a 0.3%RH resolution. Memory: 32,000 readings. Replaceable internal battery. Logging rate 1 second to 10 days with..
TK-4702-PK
Tinytalk 2 TK-4702-PK voltage logger, voltage range 0-25V DC. Memory 16,000 readings. Logging rate 1 sec to 10 days with min, max & actual readings. Comes complete with input cable...
