The MiniAir20 robust vane anemometers can be used to monitor aggressive air flows with the MC 4.0 Handheld Display. The probes are available with Steel Micro and Mini and Brass Macro heads and with flow ranges of 20m/s and 40m/s. The probes are designed to be automatically recognised by the MC4.0 display, which can set the range automatically to match the connected probe. Ideal for use in areas where the air flows may contain small particles or gases that may corrode Aluminium or plastic.
The MiniAir20 robust vane anemometer probes are available with Micro and Mini Steel heads and with Brass Macro heads for aggressive air flow ranges of up to 20m/s and 40m/s. These probes are designed to be automatically recognised by the MC4.0 display, which can set the range automatically to match the connected probe. The probes in this section are the steel blade anemometers with steel heads that are screwed directly to the handle. The Macro probes are made from Brass and Aluminium. These probe heads are not intercchangeable.
| Snaphead Size | Micro | Mini | Macro |
| Range 20m/s | 0.6 – 20 m/s | 0.4 – 20 m/s | 0.2 – 20 m/s |
| Range 40m/s | 0.7 – 40 m/s | 0.5 – 40 m/s | 0.3 – 40 m/s |
| Operating Temperature | -10 to +80°C | ||
| Snaphead Dimensions | ø11 x 15mm | ø22 x 28mm | ø85 x 80mm |
| Shaft Length | 165mm | 175mm | 235mm |
| Accuracy | 1.0% FS and 1.5% of reading | ||
| Shaft Diameter | 15mm | ||
| Cable Length from Electronics | 2m Cable (1.8m visible) | ||
93.0440
£2,114.72
93.0486
£2,166.21
95.0284
£1,578.89
95.0313
£1,618.94
95.0008
£1,265.21
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
