MC 4.0 Multiprobe Anemometer with Logger and Display
The MC 4.0 is suitable for determining the flow velocity, temperature and relative humidity of gaseous and liquid media. The measurement with a vane anemometer is considered to be the most accurate of the possible measurement methods. The MC 4.0 includes an internal logger for up to 1 million readings,..
MiniAir20 Vane Anemometers
The MiniAir20 vane anemometers can be used to monitor air flows on the MC 4.0 Handheld Display. The probes are available with Micro, Mini and Macro heads and with flow range of 20m/s and 40m/s. The probes are designed to be automatically recognised by the MC4.0 display, which can set..
MiniAir20 Robust Vane Anemometers
The MiniAir20 robust vane anemometers can be used to monitor aggressive air flows with the MC 4.0 Handheld Display. The probes are available with Steel Micro and Mini and Brass Macro heads and with flow ranges of 20m/s and 40m/s. The probes are designed to be automatically recognised by the..
MC 4.0 ThermoAir Hot Wire Anemometer
The MC 4.0 is suitable for the measurement of very low air flows, as well as air temperature and humidity readings. The measurement with a thermoelectric anemometer with uni-directional or omni-directional probe with flow ranges as low as 1 or 5m/s. The MC 4.0 includes an internal logger for up..
ThermoAir 20 Directional Hot Wire Anemometer
The ThermoAir 20 Directional Hot Wire Anemometer is a directional wind sensor suitable for monitoring low air flows. The Hot Wire Anemometer is able to detect much lower air flow velocities than the vane anemometer and probes are available with velocity range of 0-1m/s and 0-5m/s. Providing a clear low..
ThermoAir 20 Omni-Directional Hot Wire Anemometer
The ThermoAir 20 Omni-Directional Hot Wire Anemometer is wind sensor suitable for monitoring very low air flows. The Hot Wire Anemometer is able to detect much lower air flow velocities than vane anemometer and probes are available with velocity range of 0-1m/s and 0-5m/s. Providing a clear low flow value..
MC 4.0 ManoAir Pressure Gauge
The MC 4.0 ManoAir is part of the MC 4.0 range but comes with a pressure sensor module that allows the unit to measure absolute or differential pressure. The MC 4.0 ManoAir includes an internal logger for up to 1 million readings, Bluetooth connectivity and pressure module for connecting 2..
MiniAir20 Eex Portable Vane Anemometer with Display for Hazardous Areas
The MiniAir20 Eex universal anemometer is suitable for measuring the velocity of gaseous media plus air & surface temperature in a hazardous areas. The display provides an instantaneous value measurement with freely selectable average value measuring intervals, from 2 seconds up to 2 hours. Hazardous Area Approved..
MiniAir6 Vane Anemometers for Air Flow Monitoring
The MiniAir 6 is a vane anemometer for measuring the flow velocities of gases with a linear voltage output. The MiniAir 6 provides a 0-2V output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 6.5-26vDC power..
MiniAir60 Vane Anemometers for Air Flow Monitoring
The MiniAir 60 is a vane anemometer for measuring the flow velocities of gases with a linear frequency output. The MiniAir 60 provides a 0-4vDC/TTL output relative to flow velocity ranges of up to 20m/s or 40m/s with Micro, Mini and Macro sized turbines. The units require a 4.5-5.5vDC power..
MiniAir64 Vane Anemometers for Air & Gas Flows
The MiniAir64 vane anemometers provide a 4-20mA output relative to the flow velocity ranges of up to 20m/s or 40m/s. The units are simple to install or use as part of a fixed system or in conjunction with data loggers, displays or portable indicators. The sensors operate from a 9-24vDC..
ThermoAir 6 & 64 Hot Wire Anemometer with 0-1V or 4-20mA Output
The ThermoAir 6 and 64 anemometers are ideal for low air flow measurement with high resolution (0.01-5m/s) where an analogue output is required to interface with external systems such as PLC's data loggers or BMS systems. Features include automatic zero point calibration and temperature compensation from 0-40°C...
MiniAir Vane Anemometers with Ex Certification
These MiniAir vane anemometers come with Ex certification and provide linear voltage or current outputs relative to the flow velocity ranges of up to 20m/s or 40m/s. Each unit comes with external electronics and EX barrier, with a standard 20m cable between the probe and electronics. The electronics must be..
MiniAir6 High Temperature Steel Anemometers with Separate Electronic Housing
These MiniAir 6's are Steel vane anemometer for high temperature air and gas flows with a separate electronics housing with a linear voltage output. The separate electronics housing allows the Steel anemometer to be used for air flow measurements up to 250°C. The MiniAir 6 provides a 0-2V output relative..
MiniAir Replacement Snap Heads
The MiniAir anemometers with plastic anemometer heads are designed with snap on heads that can be replaced on site without any need for recalibration or adjustment. Replacement snap heads should be of the same original size, flow range and vane material as the original probes. A table is provided on..
