Description

Professional power packs housed within a protective Peli™ Case. These battery packs are the portable solution, easy to carry and install. A robust IP65 Waterproof standard case has been pre wired. The batteries use prismatic cells that create the lightest weight construction. Supplied with fitted fuel gauge and charger.

Fuel Gauge

With an external fuel gauge you can check the power level remaining in the battery. A touch of the button shows how much energy remains and whether you need to recharge.

Neutrik Connections

Each Peli™ Case is equipped with two Neutrik connections, each offering up to 20A continuous output at ambient temperature up to 25°C. A combined output of 30A can be achieved if the two connectors are used with a Twin Neutrik Output Lead (TR8155). Please note – if both sockets are being used as output connections the total current must not exceed 30A.

Waterproof

Tracer LiFePO₄ battery packs are a totally sealed unit and waterproof to IP65 standard.

IP Compliant Peli™ Cases

For more than 30 years Peli™ has built a reputation for manufacturing the toughest Protector Cases in the world. These high quality, protective cases offer safe transportation for fragile or expensive equipment and are the choice of professionals.

High Efficiency Charger

The 10A Charger (TR8206 included) will charge your battery quickly.

For faster charge times, a rapid 20A charger (TR8212) is available. Please purchase separately.

Safety Features

Integrated Electronic ‘Battery Management System’ (BMS) provides the following protection:

• Overcharge & over-discharge protection
• Thermal protection
• Over current protection
• Short circuit protection

Flat Discharge

LiFePO₄ technology gives a very flat discharge curve which means sustained power to the end of the cycle. If you are powering lights they will remain brighter for longer, giving you sustained performance.

Certified Safe

All Tracer LiFePO₄ batteries conform to standard UN 38.3 which is the ONLY relevant safety standard for LiFePO₄batteries. Our battery packs have been through a rigorous testing procedure by UN certified inspectors. You should NEVER handle a non-certified LiFePO₄ battery pack.

*Upon request the BMS can be changed to 30A continuous 60A peak.