LEO 2Ei Digital Manometer with digital display. Pressure range -1 to 3 Bar with 1mBar resolution and 0.1%FS accuracy. Peak reading function and selectable engineering units. Internal battery for up to 1,000 hours continuous operation. Pressure connection: Stainless Steel 7/16″-20 UNF male connection with ¼” BSP swivel adapter. Certified ATEX approved for intrinsic safety.
£300.00
A lot of biogas processes can include digesters where anaerobic digestion by micro organisms breakdown organic matter producing gases, which can build up. Using a LEO2EI-1-3Bar gauge can help operators to see the current pressure and take action, if necessary. Extracting excess gas before it builds up and endangers the process.
The reliability of your gas supply can be very dependent on catching leaks early and knowing the systems are properly pressurised. The resettable MIN and MAX values on the LEO2EI-1-3BAR can be used to monitor gas pressure fluctuations, catching peaks and troughs to understand the impact on your systems. A sudden spike could cause damage to equipment, or a trough could endanger delicate processes.
| Pressure Ranges | This unit | Other Stocked Ranges | Non-Stocked Ranges |
| -1…3 Bar | -1…30 Bar 0…300 Bar 0…700 Bar |
-1…10 Bar -1…100 Bar |
|
| Available Units | Bar, mBar, hPa, kPa, MPa, PSI, kp/cm2 | ||
| Accuracy | 0.1%FS typical | ||
| Compensated Temperature Range | 0 to 50 °C | ||
| Media Temperature | -40 to +85°C | ||
| Operating Temperature | -10 to +60°C, LCD 0-50°C | ||
| Storage Temperature | -20 to +0°C | ||
| Protection | IP65 | ||
Intrinsically safe version LEO2-Ei in accordance with 2014/34/EU (ATEX) and IECEx
LCIE 01 ATEX 6001 X
IECEx LCIE 18.0035 X
Zone 0: Ex II 1G Ex ia IIC T5 Ga
The intrinsically safe version may only be operated using the CR2430 battery from RENATA. Part Number: LEO2-EI-BATT
Max. permitted ambient temperature range -10 to 80 °C
We can provide the LEO2Ei-1-3BAR gauges with a calibration certificate. This can be done inhouse with UKAS traceable certification in 1-3 days, or at a UKAS certified calibration house in around 1 week. Available separately.
¼”NPT Swivel Adapters are available from stock and can be swapped for the ¼”BSP, if required.
NPL-CAL-5 POINTS
£37.50
NPL-CAL-11 POINTS
£79.35
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
