Downloads

Datasheet

LEO 2Ei Digital Manometer

Description

Product Applications – LEO2EI-1-3BAR-1/4″BSP

Biogas Industry

A lot of biogas processes can include digesters where anaerobic digestion by micro organisms breakdown organic matter producing gases, which can build up. Using a LEO2EI-1-3Bar gauge can help operators to see the current pressure and take action, if necessary. Extracting excess gas before it builds up and endangers the process.

Gas Supplies

The reliability of your gas supply can be very dependent on catching leaks early and knowing the systems are properly pressurised. The resettable MIN and MAX values on the LEO2EI-1-3BAR can be used to monitor gas pressure fluctuations, catching peaks and troughs to understand the impact on your systems. A sudden spike could cause damage to equipment, or a trough could endanger delicate processes.

Features

  • Pressure range of -1 to 3 Bar
  • Display read out can be changed to 7 different units of measure
  • Display updated twice a second for a rapid response
  • Front Buttons allow switching between Min or Max readings
  • Swivel Adapter allows for optimal positioning, even under pressure
  • Rubber Cover is available to protect the gauge from knocks or damage

Specifications

Pressure Ranges This unit Other Stocked Ranges Non-Stocked Ranges
-1…3 Bar -1…30 Bar
0…300 Bar
0…700 Bar		 -1…10 Bar
-1…100 Bar
Available Units Bar, mBar, hPa, kPa, MPa, PSI, kp/cm2
Accuracy 0.1%FS typical
Compensated Temperature Range 0 to 50 °C
Media Temperature -40 to +85°C
Operating Temperature -10 to +60°C, LCD 0-50°C
Storage Temperature -20 to +0°C
Protection IP65

Hazardous Area Details

Intrinsically safe version LEO2-Ei in accordance with 2014/34/EU (ATEX) and IECEx

LCIE 01 ATEX 6001 X
IECEx LCIE 18.0035 X
Zone 0: Ex II 1G Ex ia IIC T5 Ga

The intrinsically safe version may only be operated using the CR2430 battery from RENATA. Part Number: LEO2-EI-BATT
Max. permitted ambient temperature range -10 to 80 °C

Scope of Delivery

We can provide the LEO2Ei-1-3BAR gauges with a calibration certificate. This can be done inhouse with UKAS traceable certification in 1-3 days, or at a UKAS certified calibration house in around 1 week. Available separately.

¼”NPT Swivel Adapters are available from stock and can be swapped for the ¼”BSP, if required.