Ranges 1 tonne to 300 tonnes, output 1.5mV/V, accuracy 0.20%, sealed to IP66 (IP67 & IP68 submersible optional)
The DBCL series load cell is ideal for measuring both tensile and compressive forces in high force applications. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end Bearing. There is great flexibility in the DBCL design, allowing us to offer special sizes, to meet specific application requirements, or different end thread sizes/combinations. There are versions available with male threads at each end, or male threads one end, female the other. We are also happy to supply any of the DBCL series with imperial thread sizes.
The DBCL series can be supplied as shown or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated. The DBCL series can be supplied on it’s own or combined with our extensive range of instrumentation to provide a complete load monitoring system.
| Standard Capacities (Tonnes): | 0-1, 0-2, 0-3, 0-5, 0-7.5, 0-10, 0-20, 0-30, 0-50, 0-75, 0-100, 0-150 |
| Sensitivity: | 1.5mv/V Nominal |
| Zero Balance/Offset: | <±2.0% Rated Output |
| Non-Linearity: | <±0.2% Rated Output |
| Hysteresis: | <±0.2% Rated Output |
| Repeatability: | <±0.2% Rated Output |
| Bridge Resistance: | 1te: 350Ω , 2 to 50te: 700Ω , 15 to 150te: 1400Ω |
| Insulation Resistance: | >5000 @ 50vDC |
| Excitation Voltage: | 10vDC Recommended (2-15vDC Acceptable) |
| Operating Temperature: | -20 to +70°C |
| Compensated Temperature: | -10 to +50°C |
| Storage Temperature: | -20 to +70°C |
| Safe Overload: | 150% of Rated Capacity |
| Ultimate Overload: | 300% of Rated Capacity |
| IP Rating: | Standard IP66 (IP67 or IP68 submersible available on request) |
| Fatigue Life: | 108 Cycles Typical (109 cycles on fatigue-rated version) |
| Cable: | 6-pin bayonet lock connector with 5m mating cable assembly |
| Construction: | Stainless Steel |
| Capacity | B | C | ØD | Thread D | Weight | Resolution Tonnes |
| 0-1 Tonnes | 76 | 16 | 31 | M12 x 1.25 | 0.4Kg | 0.001 |
| 0-2 Tonnes | 76 | 16 | 31 | M12 x 1.25 | 0.4Kg | 0.002 |
| 0-3 Tonnes | 84 | 22 | 38 | M20 x 1.5 | 0.7Kg | 0.005 |
| 0-5 Tonnes | 84 | 22 | 38 | M20 x 1.5 | 0.7Kg | 0.005 |
| 0-7.5 Tonnes | 108 | 29 | 44 | M24 x 2.0 | 1.3Kg | 0.01 |
| 0-10 Tonnes | 108 | 29 | 44 | M24 x 2.0 | 1.3Kg | 0.01 |
| 0-20 Tonnes | 203 | 50 | 57 | M36 x 3.0 | 3.3Kg | 0.02 |
| 0-30 Tonnes | 355 | 89 | 114 | M64 x 4.0 | 20Kg | 0.02 |
| 0-50 Tonnes | 355 | 89 | 114 | M64 x 4.0 | 20Kg | 0.05 |
| 0-75 Tonnes | 458 | 100 | 130 | M100 x 3.0 | 35.7Kg | 0.05 |
| 0-100 Tonnes | 458 | 100 | 130 | M100 x 3.0 | 35.7Kg | 0.1 |
| 0-150 Tonnes | 458 | 100 | 156 | M100 x 3.0 | 40.5Kg | 0.2 |
The optional load buttons and rod end bearings are designed to align forces through the principle axis of the load cell, reducing the effects of extraneous forces. Load Buttons are used for compressive forces and Rod End Bearings are used for tensile forces.
TRX
£368.00
TR150
£442.00
TR150-CASE
£35.00
DSC-USB
£302.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
