omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?
9107B HART Transparent Driver

9107B HART Transparent Driver

9107B is a 1- or 2-channel isolated 1:1 driver. The device allows for the operation and drive control of I/P converters, valves and indicators in Hazardous Areas. Operation of HART devices is possible as the unit transmits HART communications signals bi-directionally. 9107B can be mounted in a safe area, or in Zone 2/Class I, Division 2 and transmit signals to Zone 1 0, 1, 2 and Zone 20, 21, 22, including mining/Class I/II/III, Div 1, Groups A-G.

View Options

Need help finding the right product?

CONTACT US

Description

Application

  • 9107B is a 1- or 2-channel isolated 1:1 driver for Intrinsically Safe Applications
  • Operation and drive control of I/P converters, valves and indicators mounted in Hazardous Area
  • Operation of HART devices is possible as the unit transmits HART communication signals bi-directionally.
  • 9107B can be mounted in the safe area or in zone 2 / Class I, Division 2 and transmit signals to Zone 0, 1, 2 and Zone 20, 21, 22, including mining/Class I/Ii/III, Div 1, Groups A-G.
  • The PR 45xx displays the process value for each channel and can be used to define high and low limits for detection of loop current level. If these limits are exceeded, the status relay will activate.
  • Dual channel versions can be used for signal splitter applications – 1 in and 2 out

Advanced features

  • The PR 45xx detachable display and the green and red front LEDs indicate operation status for each channel.
  • A tag number can be defined for each channel.
  • Output line fault detection.
  • In the 1-channel version the status relay can be used as a simple limit switch.
  • Suitable for the use in systems up to Performance Level “d” according to ISO-13849.

Technical characteristics

  • High galvanic isolation of 2.6 kVAC.
  • High accuracy better than 0.1%.
  • Continuous check of vital stored data for safety reasons.

Mounting

  • The devices can be mounted vertically or horizontally without distance between neighbouring units.

 

Environmental Conditions

Operating temperature -20°C to +60°C
Storage temperature -20°C to +85°C
Calibration temperature 20…28°C
Relative humidity < 95% RH (non-cond.)
Protection degree IP20
Installation in Pollution degree 2 & measurement / overvoltage cat. II

Mechanical specifications

Dimensions (HxWxD) 109 x 23.5 x 104 mm
Dimensions (HxWxD) w/ 4501 / 4511 109 x 23.5 x 116 / 131 mm
Weight approx. 250 g
Weight incl. 4501 / 4511 (approx.) 265 g / 350 g
DIN rail type DIN EN 60715/35 mm
Wire size 0.13…2.08 mm2 AWG 26…14 stranded wire
Screw terminal torque 0.5 Nm
Vibration IEC 60068-2-6
Vibration: 2…13.2 Hz ±1 mm
Vibration: 13.2…100 Hz ±0.7 g

Common specifications

Supply
Supply voltage 19.2…31.2 VDC

Isolation voltage
Test /working: Input to any 2.6 kVAC / 300 VAC reinforced isolation
Analog output to supply 2.6 kVAC / 300 VAC reinforced isolation
Status relay to supply 1.5 kVAC / 150 VAC reinforced isolation

Response time
Response time (0…90%, 100…10%) < 5 ms
Programming via PR 4500 Series Interface/Displays
Signal dynamics, Input
 Analog Signal Chain
Signal dynamics, Ouput Analog Signal Chain
HART bi-directional communication
frequency range		 0.5…7.5 kHz
Signal / noise ratio > 60 dB
Accuracy Better than 0.1% of selected range
mA, absolute accuracy ≤ ±16 μA
mA, temperature coefficient ≤ ±1.6 μA / °C
Effect of supply voltage change on output
(nom. 24 VDC)		 < ±10 μA
EMC immunity influence < ±0.5% of span
Extended EMC immunity: NAMUR NE 21,
A criterion, burst		 < ±1% of span

Input specifications

Current input
Measurement range 3,5…23 mA
Sensor error detection: Loop break 4…20 mA < 1 mA
Input voltage drop, supplied unit < 2 V @ 23 mA
Input voltage drop, non-supplied unit < 4 V @ 23 mA

Output specifications

Current output
Signal range 3.5…23 mA
Load (@ current output) ≤ 725 Ω
Load stability ≤ 0.01% of span / 100 Ω
Current limit ≤ 28 mA

Status relay
Max. voltage 110 VDC / 125 VAC
Max. current 0.3 ADC / 0.5 AAC
Status relay output terminal 33-34: Relay function N.C.
Programmable low setpoint 0…29.9 mA
Programmable high setpoint 0…29.9 mA
Hysteresis for setpoints 0.1 mA
Max. voltage – hazardous installation 32 VDC / 32 VAC
Max. current – hazardous installation 1 ADC / 0.5 AAC
of span = normal measurement range 4…20 mA

Observed authority requirements

EMC 2014/30/EU
LVD 2014/35/EU
ATEX 2014/34/EU
RoHS 2011/65/EU
EAC TR-CU 020/2011
EAC Ex TR-CU 012/2011

Approvals

ATEX DEKRA 11ATEX0247 X
IECEx DEK 11.0088X
FM FM16US0465X/FM16CA0213X
INMETRO DEKRA 16.0002 X
UL UL 61010-1 E314307
UL 913 E233311 (only 9107xx-U9)
CCC 2020322304003422
EAC Ex
 RU C-DK.HA65.B.00355/19
DNV Marine TAA00000JD
ClassNK TA18527M
SIL SIL 2 certified & fully assessed acc. to IEC 61508

Product

Ref

Price

Product Description

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now