The HC2A-USB converts a PC into a temperature and humidity measurement system. The HC2A-USB provides a simple PC based temperature and humidity monitoring system, ideal for residential or office rooms. It is based on the AirChip3000 technology and is connected via a USB compatible interface cable directly to a PC running the HW4 software.

The Hygrosoft is a software product and used to communicate with measurement instruments from Rotronic. Hygrosoft can perform measurement, device configuration, handling of log data, calibration, adjustment and water activity. The software is available for desktop PCs (MS Windows) and mobile devices (Android and iOS). Water Activity version available on MS Windows platform only and subject to an additional charge.

The HCD-S-MOD is a high performance Digital Humidity and Temperature Probe. Featuring very low current consumption, highest accuracy and fast measurement results within 50ms. This is due to the new AirChip4000, which together with the new HYGROMER® HT-1 sensor forms a powerful combination.

Hygroclip 2 High Temperature probes measure humidity and temperature up to 200°C. The probe is handheld, but the long probe enables full penetration into ducts, ovens, dryers or climatic chambers whilst the operator remains at a safe distance. The high performance PPS probe can withstand the wide operating range, yet has a low thermal mass which provides a faster response times than metal probes. It can be fitted with a range of filters to provide the optimum sensor protection and response characteristics the application requires.

The HygroClip industrial cable mounted probes are especially designed for demanding industrial environments with high temperatures of up to 200°C. It measures humidity and temperature and is compatible with the HF5, HF8 series measurement transmitters, HP32 and HP23 handheld devices, plus the HL-NT data loggers.

Hygroclip 2 Mini probes measure humidity and temperature in tight spaces with a 4mm stainless steel or 5mm nickel-plated brass probe on 2m of cable. Being two of the smallest combined humidity and temperature probe available, the SC04 & SC05 probes are well suited to applications where space is at apremium, or when the minimum intrusion is important. In applications where dust may be present, a slip over filter is available (Ref SP-T05).

Industrial screw-in probe for pressurised and vacuums applications up to 400 Bar with ½" BSP or ½" NPT connection. Mounted on a 2m cable with a digital interface to connect to the HygroFlex 5 series of transmitters.

Stainless steel cable mounted HygroClip2 100mm probe for measurements in industrial applications where the extra robustness of a stainless steel probe is essential. Typical applications include the food and pharmaceutical industry, or very high temperature applications. The probe is supplied with a metal sensor protection cage, that can be fitted with a range of filters to protect from high air velocity, dust and other contaminants.

Hygroclip 2 Sword probes measure humidity (ERH) and temperature in paper, card, textiles and any sheet materials. The handheld probe is robust yet lightweight and the sword has rounded edges to minimise insertion damage, and thermally equilibrates extremely quickly with the material to give you a fast result.

A selection of HC2 probes suitable for monitoring temperature and relative humidity in hazardous areas. Probes are available with for direct connection to an HF5 EX transmitter, cable mounted with 2, 5 or 10m cable and with a 1/2" BSP or NPT thread. Probes can be mounted in a Zone 0 environment with HF5 EX transmitters in Zone 1 or 2.