omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?

Weather and Environmental Sensors

Edit Content

GENII Wireless Environmental Monitoring System

The GENII wireless environmental monitoring system is able to cover a wide range of environmental parameters. Transmitters are available for direct connections to weather stations, heat flux sensors, thermocouples, light sensor, depth sensors, etc and any other sensors with standard mV, V or mA outputs. A system can be customised ...
View Product

HYGROCLIP 2. Standard Air Measurement Probes.

The HC2A-S is the standard and most cost effective range of probes for the measurement of humidity and temperature in air using handheld instruments, data loggers or transmitters. Fully interchangeable with a digital output to suit products like the HygroPalm handheld and HygroFlex transmitters. The HygroClip sensors also provide two ...
View Product
Small Stevenson Screen

Stevenson Screen Model 306

The lightweight Radiation Shield model 306 is a small Stevenson screen designed to protect temperature and relative humidity sensors against error-producing solar radiation and precipitation. The shape of the shield allows optimum wind flow between the discs, whilst prevent rain and the heat from the Sun affecting the sensors readings. ...
View Product
TR-815 Tipping Rain Bucket

TR-815 Stainless Steel Tipping Rain Bucket

The TR-815 rain gauge is a freestanding tipping rain bucket made from 304 Stainless Steel through out. Provides a 0.2mm pulse output for rain fall totals. The 8" collector features a 40-45° sharp edge to ensure correct rain collection and prevent splashing.Complies with the specifications, which requires a minimum diameter ...
View Product

TR-525 Tipping Bucket Rain Gauge

The TR-525 rain gauge is a freestanding tipping rain bucket used to measure precipitation totals with a pulse output for rain fall totals. The open top funnel is available in various sizes to allow for different measurement units (mm or inches) and to provide different resolutions for rain fall totals. ...
View Product
WD-RS Rain Sensor

Rain Sensor with Integral Heater

The WD-RS rain sensors can be combined with the WD-AMX alarm units to provide an output on the first signs of rain. This can be used to automate the closure of windows on the first drops of rain. The WD-AMX alarm unit includes a 250vAC @ 12A relay that can ...
View Product

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew, ...
View Product
PA600B Barometric Pressure Transmitter

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...
View Product
SkyWatch Handheld Anemometers

Skywatch Handheld Anemometer

The Skywatch range of handheld anemometers offers a trio of durable, precise, and multi-functional instruments. Each model is built around a large, multi-directional 54mm propeller, ensuring accurate readings without the need for perfect alignment with the wind. The Eole is a dedicated anemometer measuring instantaneous, average, and maximum wind speed. ...
View Product

Skywatch Weather Station for Smartphone with Bluetooth Connectivity

The Skywatch is a Bluetooth anemometer with sensors for wind speed, wind direction, temperature, humidity, barometric pressure and UV index. It is a small rugged handheld unit with solid state sensors housed in a stainless steel body. Real time measurements are sent to your Android or Apple smartphone which displays ...
View Product

TT-O & TT-OR Outside Air Sensor

The TT-O-CVO temperature sensors are used to measure outside air temperatures. Units are available with a PT100 sensing element, which is located in a 10mm diameter cap in the lid for the TT-O-CVO and in a PTFE radiation shield for the TT-OR-CVO. The PTFE radiation shield will minimise the effects ...
View Product
Edit Content

GENII Wireless Environmental Monitoring System

The GENII wireless environmental monitoring system is able to cover a wide range of environmental parameters. Transmitters are available for direct connections to weather stations, heat flux sensors, thermocouples, light sensor, depth sensors, etc and any other sensors with standard mV, V or mA outputs. A system can be customised to your requirements, with battery or externally powered transmitters to cover virtually any type of environmental condition and can be linked up to a GEN ...
Add to basket

HYGROCLIP 2. Standard Air Measurement Probes.

The HC2A-S is the standard and most cost effective range of probes for the measurement of humidity and temperature in air using handheld instruments, data loggers or transmitters. Fully interchangeable with a digital output to suit products like the HygroPalm handheld and HygroFlex transmitters. The HygroClip sensors also provide two analogue 0-1V output signal for OEM or data logging applications. These sensors are ideal for use with our Stevenson screen for monitoring temperature and humidity ...
Add to basket
Small Stevenson Screen

Stevenson Screen Model 306

The lightweight Radiation Shield model 306 is a small Stevenson screen designed to protect temperature and relative humidity sensors against error-producing solar radiation and precipitation. The shape of the shield allows optimum wind flow between the discs, whilst prevent rain and the heat from the Sun affecting the sensors readings. The white UV stabilized thermoplastic discs offer a high reflectivity, low thermal conductivity and rugged weather resistance. The screen can be mounted directly to a ...
Add to basket
TR-815 Tipping Rain Bucket

TR-815 Stainless Steel Tipping Rain Bucket

The TR-815 rain gauge is a freestanding tipping rain bucket made from 304 Stainless Steel through out. Provides a 0.2mm pulse output for rain fall totals. The 8" collector features a 40-45° sharp edge to ensure correct rain collection and prevent splashing.Complies with the specifications, which requires a minimum diameter of 8" collector. ...
Read more

TR-525 Tipping Bucket Rain Gauge

The TR-525 rain gauge is a freestanding tipping rain bucket used to measure precipitation totals with a pulse output for rain fall totals. The open top funnel is available in various sizes to allow for different measurement units (mm or inches) and to provide different resolutions for rain fall totals. Buckets are also available to comply with the specifications required by the National Weather Service, which requires a minimum diameter of 8". ...
Add to basket
WD-RS Rain Sensor

Rain Sensor with Integral Heater

The WD-RS rain sensors can be combined with the WD-AMX alarm units to provide an output on the first signs of rain. This can be used to automate the closure of windows on the first drops of rain. The WD-AMX alarm unit includes a 250vAC @ 12A relay that can be used to activate motors to close the windows, or by integration into an existing Building Management System to then control the windows. The WD-RS ...
Add to basket

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew, plus it will help drying the surface after the precipitation has stopped falling. ...
Add to basket
PA600B Barometric Pressure Transmitter

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...
Select options
SkyWatch Handheld Anemometers

Skywatch Handheld Anemometer

The Skywatch range of handheld anemometers offers a trio of durable, precise, and multi-functional instruments. Each model is built around a large, multi-directional 54mm propeller, ensuring accurate readings without the need for perfect alignment with the wind. The Eole is a dedicated anemometer measuring instantaneous, average, and maximum wind speed. The Meteos adds a thermometer, calculating and displaying the wind chill factor alongside the full suite of wind measurements. The flagship Atmos unit is a ...
Read more

Skywatch Weather Station for Smartphone with Bluetooth Connectivity

The Skywatch is a Bluetooth anemometer with sensors for wind speed, wind direction, temperature, humidity, barometric pressure and UV index. It is a small rugged handheld unit with solid state sensors housed in a stainless steel body. Real time measurements are sent to your Android or Apple smartphone which displays the values and also logs data. Data can be combined from several instruments via the Skywatch web interface. ...
Read more

TT-O & TT-OR Outside Air Sensor

The TT-O-CVO temperature sensors are used to measure outside air temperatures. Units are available with a PT100 sensing element, which is located in a 10mm diameter cap in the lid for the TT-O-CVO and in a PTFE radiation shield for the TT-OR-CVO. The PTFE radiation shield will minimise the effects of direct sunlight and strong winds. The units use a 24vDC power supply to provide an active 0-10V or 4-20mA output option with pre-set temperature ...
Read more

GENII Wireless Environmental Monitoring System

The GENII wireless environmental monitoring system is able to cover a wide range of environmental parameters. Transmitters are available for direct connections to weather stations, heat flux sensors, thermocouples, light sensor, depth sensors, etc and any other sensors with standard mV, V or mA outputs. A system can be customised ...
View Product

HYGROCLIP 2. Standard Air Measurement Probes.

The HC2A-S is the standard and most cost effective range of probes for the measurement of humidity and temperature in air using handheld instruments, data loggers or transmitters. Fully interchangeable with a digital output to suit products like the HygroPalm handheld and HygroFlex transmitters. The HygroClip sensors also provide two ...
View Product
Small Stevenson Screen

Stevenson Screen Model 306

The lightweight Radiation Shield model 306 is a small Stevenson screen designed to protect temperature and relative humidity sensors against error-producing solar radiation and precipitation. The shape of the shield allows optimum wind flow between the discs, whilst prevent rain and the heat from the Sun affecting the sensors readings. ...
View Product
TR-815 Tipping Rain Bucket

TR-815 Stainless Steel Tipping Rain Bucket

The TR-815 rain gauge is a freestanding tipping rain bucket made from 304 Stainless Steel through out. Provides a 0.2mm pulse output for rain fall totals. The 8" collector features a 40-45° sharp edge to ensure correct rain collection and prevent splashing.Complies with the specifications, which requires a minimum diameter ...
View Product

TR-525 Tipping Bucket Rain Gauge

The TR-525 rain gauge is a freestanding tipping rain bucket used to measure precipitation totals with a pulse output for rain fall totals. The open top funnel is available in various sizes to allow for different measurement units (mm or inches) and to provide different resolutions for rain fall totals. ...
View Product
WD-RS Rain Sensor

Rain Sensor with Integral Heater

The WD-RS rain sensors can be combined with the WD-AMX alarm units to provide an output on the first signs of rain. This can be used to automate the closure of windows on the first drops of rain. The WD-AMX alarm unit includes a 250vAC @ 12A relay that can ...
View Product

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew, ...
View Product
PA600B Barometric Pressure Transmitter

PA600B Barometric Pressure Transmitter

The PA600 series barometric pressure transmitter has a set range of 0.75 - 1.25 Bar absolute. It is available with 4-20mA 0-5V, 0-10V, a ratiometric 0.5 - 4.5V or 2mV/V outputs The unit has a stainless steel body and suitable for long-term installation outdoors. ...
View Product
SkyWatch Handheld Anemometers

Skywatch Handheld Anemometer

The Skywatch range of handheld anemometers offers a trio of durable, precise, and multi-functional instruments. Each model is built around a large, multi-directional 54mm propeller, ensuring accurate readings without the need for perfect alignment with the wind. The Eole is a dedicated anemometer measuring instantaneous, average, and maximum wind speed. ...
View Product

Skywatch Weather Station for Smartphone with Bluetooth Connectivity

The Skywatch is a Bluetooth anemometer with sensors for wind speed, wind direction, temperature, humidity, barometric pressure and UV index. It is a small rugged handheld unit with solid state sensors housed in a stainless steel body. Real time measurements are sent to your Android or Apple smartphone which displays ...
View Product

TT-O & TT-OR Outside Air Sensor

The TT-O-CVO temperature sensors are used to measure outside air temperatures. Units are available with a PT100 sensing element, which is located in a 10mm diameter cap in the lid for the TT-O-CVO and in a PTFE radiation shield for the TT-OR-CVO. The PTFE radiation shield will minimise the effects ...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now