QI Single Phase Power & Energy Meter
Compact CT sized power meter that offers a huge number of measurements including THD, Watt, VA, VAR, kW/h, Min/Max RMS plus many more. Ranges up too 1000V and 400A and frequency from 1Hz to 400Hz with a 0.5% accuracy. Fast 11k Hz sampling rate capable of capturing spikes in your..
Conto D4-Sh – Multifunction Power Meters
The Conto D4-SH multifunction power meter is suitable for monitoring single and three phase supplies for current, phase to phase and phase to neutral voltage and kWh consumption. It offers a pulse output for kWh measurement or Modbus RS485..
Conto D4-Pd kWh Meter
The Conto D4-Pd can be used for single phase or three phase direct input, up to 63 amps. It is available with pulsed output for kWh or Modbus RS485..
Direct Input Multifunction Energy Meter
A low cost DIN rail mounting multifunction energy meters with direct mains electricity input (no CT required) for single phase supplies up to 80A. The meter features a backlit LCD display and an RS485 Modbus output. The Modbus output can be connected to a wide range of Omni Instruments data..
Direct Input MID Approved KWh Meters
A low cost DIN rail mounting MID approved kWh meters with direct mains electricity input (no CT required). Ranges 0-45 or 0-100 amps. The Pulse output can be connected to a wide range of Omni Instruments data loggers and remote data acquisition units (GPRS, and SMS). The PRO1D-MID & PRO75D-MID..
ND-350 Multi-Function Meter
The ND-350 is a DIN Rail mounted Electronic Multifunction Power Meter. Suitable for both 3 wire and 4 wire 3f unbalanced loads, these Meters have been designed to measure accurately irrespective of the type of load ideal for a motor or heater, or for a modern electronically controlled load. Available..
Nemo 96 HD Multi-Function Power Meters
The Nemo 96 HD is a multifunction power meter designed as a panel mounted meter with plug in modules for different communication outputs. Output modules include RS485 (Modbus/JBus RTU protocols), RS232, Pulse Output, 4-20mA, SPST Relays, M-Bus and Profibus protocols...
Nemo D4-DC Multi-Function DC Power Meter
The Nemo D4-DC is a multi-function power meter designed for monitoring DC power supplies. Voltage input 10-300vDC and direct current of up to 10A. Higher ranges available using external adapters and DC current Shunts. Output has two alarm relay outputs, pulse output or RS485 Communications...
DBP Series Split Core Current Transformers.
A range of split core transformers designed for installation into existing plants where removal of busbars/cable lugs prevent installation of standard current transformers. Suitable for monitoring single phases and can be used with the Conto D4, ADM and PRO range of Energy Meters...
TAS Series Fixed Core Current Transformers.
A range of high quality 3 phase current transformers in a single housing with fixed cores suitable for primary currents from 50 to 800A. Suitable for monitoring three phases and can be used with the Conto D4, ADM and PRO range of Energy Meters...
PM-CT-M Current Transformer
The PM-CT-M range of moulded case type Current Transformers are for use with the PM-M850 kWh Meter and other suitable equipment...
PM-CT-xSC Current Transformers (Split Core)
This range of split core Current Transformers can be fitted to conductors without disruption to the installation. They are ideal for retrofits, upgrades and temporary applications. Suitable for use with the PM-M850 kWh Meter...
QA-POWER-M Single Phase Network Power Analyser and Data Logger
Single phase network power analyser with TRMS (true RMS) function. USB configurable, with 4-way galvanic isolation The input range is 1000vDC / 600vAC, 10A AC/DC or up to 800A with additional CT, with universal power supply AC/DC, programmable alarm contact, RS485 Modbus output, and a 4-20mA / 0-10v DC output....
NEMO 96HD Additional Modules
A selection of NEMO 96HD modules for use with the Nemo 96HD Multi-function power meters. These modules provide additional output and communications options to the power meters..
