Uncategorised

Grid View
List View

Edit Content

MLP-149-001

MultiPrint Thermal Printer. Power Supply 20-30vDC @ 36W. Operating Temperature 0 to 50°C. Unit is supplied with rolls of thermal paper and USB cables for connecting to CMC logger. Requires a CMC with a rear USB port for connection. ...

SGW1-2B0-00-IA3-MB-NM

SGW1 - NMEA 0183 to Modbus RTU/ASCII protocol converter. 2 RS232/RS485 ports (1 x NMEA + 1 x Modbus) plus USB port for configuration. This converter will read the data on an NMEA 0183 device and map the readings to Modbus registers. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: ...

DESK-NT

Desktop stand for the HygroPalm handheld instruments HP21, HP22, HP23, HP-23-AW with securing clip. ...

BATT-0004

3.6V Lithium AA Battery. Supplied batteries may differ from the picture. ...

SER-9513

A service kit for the Tinytag Transit (TG-3080). This kit contains a replacement battery and a service instruction sheet. ...

SER-9550

The SER-9550 service kit is suitable for the Tinytag View 2 loggers. This kit contains a replacement battery, seal, silica gel pack and a service instruction sheet. ...

SER-9514

Service Kit for Tinytag Transit 2 & CO2 data loggers. This kit contains a replacement battery and a service instruction sheet for the Transit 2 (TG-4080 & TG-4081) and CO2 (TGE-0010 & TGE-0011) data loggers. ...

4512

PR 4512 Bluetooth Communications Interface. Allows for programming and live readings to a iOS or Android device and any of the 4000 and 9000 Series devices. Each 4512 display can be used on several different units to allow for modification/transfer of operation parameters or on an individual unit as a ...

SER-9525

A service kit for the Tinytag Aquatic 2 data logger. This pack contains a replacement battery, 'O' ring and a service instruction sheet. ...

BATT-0006

2/3AA Replacement High Temperature Lithium battery for EL-USB-1-PRO dataloggers. ...

SP-1051

Modification to allow the GS-44 to run on an external 9VDC supply. ...

DARCAPLUS

DARCA Plus Version 3.0. Downloading And Remote Control Application for GEN II Receiver Loggers and Squirrel 1000 Series data loggers. Powerful graphing tools display real-time or historical data, summary window displays data and statistical information, configures GEN II transmitters and map transmitter to Squirrel channels, password protected, printer output, connection ...

LW-ANT/SMA

Lightweight indoor/outdoor dipole antenna with 5m lead, SMA plug and mounting hardware ...

PR-CONFIG

Complete programming and configuration of programmable PR units to client specifications prior to shipping. ...

DARCAHERITAGE

DARCA Heritage Version 1.0 software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a datafile, warning if ...

MOUNT-1212

3.5g Tube of Thermally Conductive and Electrically Insulating Thermal Paste. Operating temperature range -50 to +130°C, thermal conductivity 9.0W/(mK). Ideal for applications where pressure is applied to fix the sensor and will provide a very strong thermal coupling as paste will adapt to the surface inhomogeneities. ...

DARCAHERITAGE V2

DARCA Heritage Version 2.0 Administrator software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a database, warning ...

MOUNT-1213

Thermally conductive and electrically insulating thermal glue. 2 x 3.5g tubes, operating temperature range -40 to +150°C, thermal conductivity 7.5W/(mK). Ideal for applications requiring additional mechanical stability. ...

DARCAHERITAGE V2-ADD

Additional User Licences for Darca Heritage Version 2.0. ...

MOUNT-1235

Double Sided Thermal Tape. Thermally conductive and electrically insulating double-sided tape. Dimensions: 3cm wide, 5m length. Ideal for mounting gSkin U-Value and Heat Flux sensors indoors. ...

MOUNT-1237

250g tub of thermally conductive putty for mounting gSkin sensors. Ideal for repeated mounting and remounting sensors to different locations and surfaces. Suitable for use with various different U-Value and Heat Flux sensors. ...

CAL-TEMP-UK

Single point UKAS traceable temperature calibration certificate available for any of the EL-USB temperature data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25 C) and conforms to the stated specification. The equipment used ...

CAL-TEMP/RH-UK

Single-point, UKAS traceable temperature and humidity calibration certificate available for any of the EL-USB/Wifi temperature and humidity data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25°C) and humidity (50%) and conforms to the ...

ELCS-3-0

ELCS-3-0 U type thermistor probe, 3 metre cable, with stainless steel probe 124 x 4.8mm diameter. ...

Edit Content

MLP-149-001

MultiPrint Thermal Printer. Power Supply 20-30vDC @ 36W. Operating Temperature 0 to 50°C. Unit is supplied with rolls of thermal paper and USB cables for connecting to CMC logger. Requires a CMC with a rear USB port for connection. ...

SGW1-2B0-00-IA3-MB-NM

SGW1 - NMEA 0183 to Modbus RTU/ASCII protocol converter. 2 RS232/RS485 ports (1 x NMEA + 1 x Modbus) plus USB port for configuration. This converter will read the data on an NMEA 0183 device and map the readings to Modbus registers. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: 100 x 22.5 x 112mm. Operating Temperature: -15 to 65°C. ...

DESK-NT

Desktop stand for the HygroPalm handheld instruments HP21, HP22, HP23, HP-23-AW with securing clip. ...

BATT-0004

3.6V Lithium AA Battery. Supplied batteries may differ from the picture. ...

SER-9513

A service kit for the Tinytag Transit (TG-3080). This kit contains a replacement battery and a service instruction sheet. ...

SER-9550

The SER-9550 service kit is suitable for the Tinytag View 2 loggers. This kit contains a replacement battery, seal, silica gel pack and a service instruction sheet. ...

SER-9514

Service Kit for Tinytag Transit 2 & CO2 data loggers. This kit contains a replacement battery and a service instruction sheet for the Transit 2 (TG-4080 & TG-4081) and CO2 (TGE-0010 & TGE-0011) data loggers. ...

4512

PR 4512 Bluetooth Communications Interface. Allows for programming and live readings to a iOS or Android device and any of the 4000 and 9000 Series devices. Each 4512 display can be used on several different units to allow for modification/transfer of operation parameters or on an individual unit as a fixed display for readout of process data and status, plus as the 4512 can also provide 30 days data logging at 1 second intervals of ...

SER-9525

A service kit for the Tinytag Aquatic 2 data logger. This pack contains a replacement battery, 'O' ring and a service instruction sheet. ...

BATT-0006

2/3AA Replacement High Temperature Lithium battery for EL-USB-1-PRO dataloggers. ...

SP-1051

Modification to allow the GS-44 to run on an external 9VDC supply. ...

DARCAPLUS

DARCA Plus Version 3.0. Downloading And Remote Control Application for GEN II Receiver Loggers and Squirrel 1000 Series data loggers. Powerful graphing tools display real-time or historical data, summary window displays data and statistical information, configures GEN II transmitters and map transmitter to Squirrel channels, password protected, printer output, connection to loggers via serial port, USB, GSM or land line. ...

LW-ANT/SMA

Lightweight indoor/outdoor dipole antenna with 5m lead, SMA plug and mounting hardware ...

PR-CONFIG

Complete programming and configuration of programmable PR units to client specifications prior to shipping. ...

DARCAHERITAGE

DARCA Heritage Version 1.0 software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a datafile, warning if any channel inputs are outside of safe limits, sending alarms via email or text message, metering data graphically on user-defined floorplans which show each groups ...

MOUNT-1212

3.5g Tube of Thermally Conductive and Electrically Insulating Thermal Paste. Operating temperature range -50 to +130°C, thermal conductivity 9.0W/(mK). Ideal for applications where pressure is applied to fix the sensor and will provide a very strong thermal coupling as paste will adapt to the surface inhomogeneities. ...

DARCAHERITAGE V2

DARCA Heritage Version 2.0 Administrator software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a database, warning if any channel inputs are outside of safe limits, sending alarms via email or text message, metering data graphically on user-defined floorplans which show each ...

MOUNT-1213

Thermally conductive and electrically insulating thermal glue. 2 x 3.5g tubes, operating temperature range -40 to +150°C, thermal conductivity 7.5W/(mK). Ideal for applications requiring additional mechanical stability. ...

DARCAHERITAGE V2-ADD

Additional User Licences for Darca Heritage Version 2.0. ...

MOUNT-1235

Double Sided Thermal Tape. Thermally conductive and electrically insulating double-sided tape. Dimensions: 3cm wide, 5m length. Ideal for mounting gSkin U-Value and Heat Flux sensors indoors. ...

MOUNT-1237

250g tub of thermally conductive putty for mounting gSkin sensors. Ideal for repeated mounting and remounting sensors to different locations and surfaces. Suitable for use with various different U-Value and Heat Flux sensors. ...

CAL-TEMP-UK

Single point UKAS traceable temperature calibration certificate available for any of the EL-USB temperature data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25 C) and conforms to the stated specification. The equipment used for the test is traceable to UKAS standards. ...

CAL-TEMP/RH-UK

Single-point, UKAS traceable temperature and humidity calibration certificate available for any of the EL-USB/Wifi temperature and humidity data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25°C) and humidity (50%) and conforms to the stated specification. The equipment used for the test is traceable to UKAS standards. ...

ELCS-3-0

ELCS-3-0 U type thermistor probe, 3 metre cable, with stainless steel probe 124 x 4.8mm diameter. ...

MLP-149-001

MultiPrint Thermal Printer. Power Supply 20-30vDC @ 36W. Operating Temperature 0 to 50°C. Unit is supplied with rolls of thermal paper and USB cables for connecting to CMC logger. Requires a CMC with a rear USB port for connection. ...

SGW1-2B0-00-IA3-MB-NM

SGW1 - NMEA 0183 to Modbus RTU/ASCII protocol converter. 2 RS232/RS485 ports (1 x NMEA + 1 x Modbus) plus USB port for configuration. This converter will read the data on an NMEA 0183 device and map the readings to Modbus registers. Power supply: 10-30vDC, consumption 70mA @ 12vDC. Dimensions: ...

DESK-NT

Desktop stand for the HygroPalm handheld instruments HP21, HP22, HP23, HP-23-AW with securing clip. ...

BATT-0004

3.6V Lithium AA Battery. Supplied batteries may differ from the picture. ...

SER-9513

A service kit for the Tinytag Transit (TG-3080). This kit contains a replacement battery and a service instruction sheet. ...

SER-9550

The SER-9550 service kit is suitable for the Tinytag View 2 loggers. This kit contains a replacement battery, seal, silica gel pack and a service instruction sheet. ...

SER-9514

Service Kit for Tinytag Transit 2 & CO2 data loggers. This kit contains a replacement battery and a service instruction sheet for the Transit 2 (TG-4080 & TG-4081) and CO2 (TGE-0010 & TGE-0011) data loggers. ...

4512

PR 4512 Bluetooth Communications Interface. Allows for programming and live readings to a iOS or Android device and any of the 4000 and 9000 Series devices. Each 4512 display can be used on several different units to allow for modification/transfer of operation parameters or on an individual unit as a ...

SER-9525

A service kit for the Tinytag Aquatic 2 data logger. This pack contains a replacement battery, 'O' ring and a service instruction sheet. ...

BATT-0006

2/3AA Replacement High Temperature Lithium battery for EL-USB-1-PRO dataloggers. ...

SP-1051

Modification to allow the GS-44 to run on an external 9VDC supply. ...

DARCAPLUS

DARCA Plus Version 3.0. Downloading And Remote Control Application for GEN II Receiver Loggers and Squirrel 1000 Series data loggers. Powerful graphing tools display real-time or historical data, summary window displays data and statistical information, configures GEN II transmitters and map transmitter to Squirrel channels, password protected, printer output, connection ...

LW-ANT/SMA

Lightweight indoor/outdoor dipole antenna with 5m lead, SMA plug and mounting hardware ...

PR-CONFIG

Complete programming and configuration of programmable PR units to client specifications prior to shipping. ...

DARCAHERITAGE

DARCA Heritage Version 1.0 software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a datafile, warning if ...

MOUNT-1212

3.5g Tube of Thermally Conductive and Electrically Insulating Thermal Paste. Operating temperature range -50 to +130°C, thermal conductivity 9.0W/(mK). Ideal for applications where pressure is applied to fix the sensor and will provide a very strong thermal coupling as paste will adapt to the surface inhomogeneities. ...

DARCAHERITAGE V2

DARCA Heritage Version 2.0 Administrator software for GEN II Receiver Loggers and Squirrel 1000 Series data loggers in large installations. Designed specifically for museum curators and users wanting a more advanced software package. Configuring and metering GEN II Transmitters, changing logger settings, updating site data automatically to a database, warning ...

MOUNT-1213

Thermally conductive and electrically insulating thermal glue. 2 x 3.5g tubes, operating temperature range -40 to +150°C, thermal conductivity 7.5W/(mK). Ideal for applications requiring additional mechanical stability. ...

DARCAHERITAGE V2-ADD

Additional User Licences for Darca Heritage Version 2.0. ...

MOUNT-1235

Double Sided Thermal Tape. Thermally conductive and electrically insulating double-sided tape. Dimensions: 3cm wide, 5m length. Ideal for mounting gSkin U-Value and Heat Flux sensors indoors. ...

MOUNT-1237

250g tub of thermally conductive putty for mounting gSkin sensors. Ideal for repeated mounting and remounting sensors to different locations and surfaces. Suitable for use with various different U-Value and Heat Flux sensors. ...

CAL-TEMP-UK

Single point UKAS traceable temperature calibration certificate available for any of the EL-USB temperature data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25 C) and conforms to the stated specification. The equipment used ...

CAL-TEMP/RH-UK

Single-point, UKAS traceable temperature and humidity calibration certificate available for any of the EL-USB/Wifi temperature and humidity data loggers (except EL-USB-RT). Each certificate is valid for 12 months and indicates that the purchased data logger has been tested at a specific temperature (25°C) and humidity (50%) and conforms to the ...

ELCS-3-0

ELCS-3-0 U type thermistor probe, 3 metre cable, with stainless steel probe 124 x 4.8mm diameter. ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Uncategorised

MLP-149-001

SGW1-2B0-00-IA3-MB-NM

DESK-NT

BATT-0004

SER-9513

SER-9550

SER-9514

4512

SER-9525

BATT-0006

SP-1051

DARCAPLUS

LW-ANT/SMA

PR-CONFIG

DARCAHERITAGE

MOUNT-1212

DARCAHERITAGE V2

MOUNT-1213

DARCAHERITAGE V2-ADD

MOUNT-1235

MOUNT-1237

CAL-TEMP-UK

CAL-TEMP/RH-UK

ELCS-3-0

MLP-149-001

SGW1-2B0-00-IA3-MB-NM

DESK-NT

BATT-0004

SER-9513

SER-9550

SER-9514

4512

SER-9525

BATT-0006

SP-1051

DARCAPLUS

LW-ANT/SMA

PR-CONFIG

DARCAHERITAGE

MOUNT-1212

DARCAHERITAGE V2

MOUNT-1213

DARCAHERITAGE V2-ADD

MOUNT-1235

MOUNT-1237

CAL-TEMP-UK

CAL-TEMP/RH-UK

ELCS-3-0

MLP-149-001

SGW1-2B0-00-IA3-MB-NM

DESK-NT

BATT-0004

SER-9513

SER-9550

SER-9514

4512

SER-9525

BATT-0006

SP-1051

DARCAPLUS

LW-ANT/SMA

PR-CONFIG

DARCAHERITAGE

MOUNT-1212

DARCAHERITAGE V2

MOUNT-1213

DARCAHERITAGE V2-ADD

MOUNT-1235

MOUNT-1237

CAL-TEMP-UK

CAL-TEMP/RH-UK

ELCS-3-0

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.