Skip to content

omni instruments | sensors and data acquisition equipment

Omni Instruments Ltd

Sales & Technical Support

  • +44 (0) 1382 443000
  • info@omni.uk.com
Omni Instruments Ltd
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Products
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
  • Home
  • Custom Systems
  • Our Brands
  • System Hires
  • About
  • Contact
Need Help?
£0.00 0 Basket
Product
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
  • Data Loggers
  • Displacement
  • Display & Control
  • Flow Meters
  • Gas Detection
  • Gyros & Accelerometers
  • Level & Distance
  • Load Cells
  • Pressure Sensors
  • Radio & GSM Telemetry
  • Remote Monitoring
  • Serial Ethernet & ModBus
  • Solar & Wind Power
  • Subsea & Offshore
  • Temperature and Humidity
  • Test & Calibration
  • Torque Transducers
  • Vibration Monitoring
  • Voltage & Current
  • Water Quality
  • Weather Instruments
  • Accessories
£0.00 0 Basket

Uncategorised

Home / Uncategorised / Page 58
  • Grid View
  • List View
SAFT LS26500 3.6V Battery

BATT-SB-C

SAFT LS26500 Size C Battery. Capacity 3.6V @ 7.7Ah...
View Product

CAL-SCS-ANEMOMETER

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers a 5 point calibration...
View Product

CAL2AXISFIXEDPOINT

Calibration 2 Axis - Fixed Point (Wind Tunnel). The calibration procedure involves the unit being fixed in one point facing North with a varying wind speed from 0 to 30 or 40m/s. The calibration certificate then compares the wind tunnel velocity readings to those collected by the unit...
View Product

CALCERT A

Initial Calibration Certificate for Infrared Sensors, PyroMini, PyroCouple and PyroPen. UKAS traceable certificate showing the measured temperature at three points across the sensors temperature range. Only available when ordered along with a brand new sensor...
View Product

CMC-99-LOGGER

Licence Key to allow a CMC-99 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
View Product

GC-60

Transmitters for use with external probes - Wired sockets for 2 x state indications (e.g. door open/close)..
View Product

KTC-EXT-CAB-100M-REEL

Type K extension cable 7/0.2mm PVC flat pair. c100M length Reel..
View Product
MTN/MS001 - Quickfit to Flat Base Adapter

MTN/MS001

Quick-fit to stainless steel flat base adapter for attachment with epoxy resin. Provides a high rigidity connection but with reduced high frequency response...
View Product

UA-USB-232-ISO

USB to RS232 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
View Product

ULTRA-COP

Non-melting hydrocarbon grease. Low contact resistance. 50ml tube. Provides a clear contact from sensor to the surface to improve the ultrasonic signal...
View Product

WCDCOM32

COM 32 Installation CD with USB cable..
View Product

551-72

30ml Fill Solution for Galvanic Dissolved Oxygen Electrode...
View Product

CAL-SCS-ANEMOMETER-ADD

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers additional probes over a single flow range or additionals ranges on the same probe...
View Product

CMC-141-LOGGER

Licence Key to allow a CMC-141 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
View Product

GC-60F

GEN II radio transmitter with wired sockets for connection to water detection cables. The GC-60F will transmit a 1.0 value for OK and a 0.0 value to indicate the presence of water on the active portion of the detection cable. Supplied with 4 x AA Alkaline batteries, stub antenna and..
View Product

MPU18V

100-240VAC 50/60Hz Mains Adapter supplied with 4-single fit mains plugs for UK, Euro, US and AUS/NZ. Powers SQHUB and Data Loggers. Output 18VDC, 1.6A..
View Product
MTN/MS002 - Quickfit to M8 Thread Adapter

MTN/MS002

Quick-fit to M8 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
View Product

UA-USB-485-ISO

USB to RS485 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
View Product

CMC-N16-LOGGER

Licence Key to allow a CMC-N16 unit to log data...
View Product
MTN/MS003 - Quickfit to M10 Thread Adapter

MTN/MS003

Quick-fit to M10 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
View Product

133-220

General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 3 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-220..
View Product

3462523

2 Metre Cable with IP67 M12 Mating Connector. Colour Coding: Pin 1 - Brown, Pin 2 - White, Pin 3 - Blue, Pin 4 - Black...
View Product

551-73

500ml Zero Solution for Dissolved Oxygen Electrode..
View Product

888257

Quasar 900 Series Extended Commissioning Kit, Covers Methane, Propane and Ethylene. The kit includes an alignment tool, a magnetic mode selector, 6 functional check filters (Part No. 888260-1, 88260-2, 888260-3, 888260-4, 888260-5 and 888260-6), socket keys and non-EX USB/RS485 harness converter kit.. Used for System installations and periodical function tests..
View Product
Previous Page1 … Page5 Next
SAFT LS26500 3.6V Battery

BATT-SB-C

SAFT LS26500 Size C Battery. Capacity 3.6V @ 7.7Ah. ...
View Product

CAL-SCS-ANEMOMETER

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers a 5 point calibration. ...
View Product

CAL2AXISFIXEDPOINT

Calibration 2 Axis - Fixed Point (Wind Tunnel). The calibration procedure involves the unit being fixed in one point facing North with a varying wind speed from 0 to 30 or 40m/s. The calibration certificate then compares the wind tunnel velocity readings to those collected by the unit. ...
View Product

CALCERT A

Initial Calibration Certificate for Infrared Sensors, PyroMini, PyroCouple and PyroPen. UKAS traceable certificate showing the measured temperature at three points across the sensors temperature range. Only available when ordered along with a brand new sensor. ...
View Product

CMC-99-LOGGER

Licence Key to allow a CMC-99 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels). ...
View Product

GC-60

Transmitters for use with external probes - Wired sockets for 2 x state indications (e.g. door open/close) ...
View Product

KTC-EXT-CAB-100M-REEL

Type K extension cable 7/0.2mm PVC flat pair. c100M length Reel ...
View Product
MTN/MS001 - Quickfit to Flat Base Adapter

MTN/MS001

Quick-fit to stainless steel flat base adapter for attachment with epoxy resin. Provides a high rigidity connection but with reduced high frequency response. ...
View Product

UA-USB-232-ISO

USB to RS232 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable. ...
View Product

ULTRA-COP

Non-melting hydrocarbon grease. Low contact resistance. 50ml tube. Provides a clear contact from sensor to the surface to improve the ultrasonic signal. ...
View Product

WCDCOM32

COM 32 Installation CD with USB cable ...
View Product

551-72

30ml Fill Solution for Galvanic Dissolved Oxygen Electrode. ...
View Product

CAL-SCS-ANEMOMETER-ADD

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers additional probes over a single flow range or additionals ranges on the same probe. ...
View Product

CMC-141-LOGGER

Licence Key to allow a CMC-141 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels). ...
View Product

GC-60F

GEN II radio transmitter with wired sockets for connection to water detection cables. The GC-60F will transmit a 1.0 value for OK and a 0.0 value to indicate the presence of water on the active portion of the detection cable. Supplied with 4 x AA Alkaline batteries, stub antenna and integrated LCD display. Leak sensing cable available separately. ...
View Product

MPU18V

100-240VAC 50/60Hz Mains Adapter supplied with 4-single fit mains plugs for UK, Euro, US and AUS/NZ. Powers SQHUB and Data Loggers. Output 18VDC, 1.6A ...
View Product
MTN/MS002 - Quickfit to M8 Thread Adapter

MTN/MS002

Quick-fit to M8 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response. ...
View Product

UA-USB-485-ISO

USB to RS485 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable. ...
View Product

CMC-N16-LOGGER

Licence Key to allow a CMC-N16 unit to log data. ...
View Product
MTN/MS003 - Quickfit to M10 Thread Adapter

MTN/MS003

Quick-fit to M10 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response. ...
View Product

133-220

General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 3 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-220 ...
View Product

3462523

2 Metre Cable with IP67 M12 Mating Connector. Colour Coding: Pin 1 - Brown, Pin 2 - White, Pin 3 - Blue, Pin 4 - Black. ...
View Product

551-73

500ml Zero Solution for Dissolved Oxygen Electrode ...
View Product

888257

Quasar 900 Series Extended Commissioning Kit, Covers Methane, Propane and Ethylene. The kit includes an alignment tool, a magnetic mode selector, 6 functional check filters (Part No. 888260-1, 88260-2, 888260-3, 888260-4, 888260-5 and 888260-6), socket keys and non-EX USB/RS485 harness converter kit.. Used for System installations and periodical function tests and re-alignments. ...
View Product
SAFT LS26500 3.6V Battery

BATT-SB-C

SAFT LS26500 Size C Battery. Capacity 3.6V @ 7.7Ah...
View Product

CAL-SCS-ANEMOMETER

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers a 5 point calibration...
View Product

CAL2AXISFIXEDPOINT

Calibration 2 Axis - Fixed Point (Wind Tunnel). The calibration procedure involves the unit being fixed in one point facing North with a varying wind speed from 0 to 30 or 40m/s. The calibration certificate then compares the wind tunnel velocity readings to those collected by the unit...
View Product

CALCERT A

Initial Calibration Certificate for Infrared Sensors, PyroMini, PyroCouple and PyroPen. UKAS traceable certificate showing the measured temperature at three points across the sensors temperature range. Only available when ordered along with a brand new sensor...
View Product

CMC-99-LOGGER

Licence Key to allow a CMC-99 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
View Product

GC-60

Transmitters for use with external probes - Wired sockets for 2 x state indications (e.g. door open/close)..
View Product

KTC-EXT-CAB-100M-REEL

Type K extension cable 7/0.2mm PVC flat pair. c100M length Reel..
View Product
MTN/MS001 - Quickfit to Flat Base Adapter

MTN/MS001

Quick-fit to stainless steel flat base adapter for attachment with epoxy resin. Provides a high rigidity connection but with reduced high frequency response...
View Product

UA-USB-232-ISO

USB to RS232 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
View Product

ULTRA-COP

Non-melting hydrocarbon grease. Low contact resistance. 50ml tube. Provides a clear contact from sensor to the surface to improve the ultrasonic signal...
View Product

WCDCOM32

COM 32 Installation CD with USB cable..
View Product

551-72

30ml Fill Solution for Galvanic Dissolved Oxygen Electrode...
View Product

CAL-SCS-ANEMOMETER-ADD

SCS Calibration Certificate for MiniAir anemometers, vane anemometers fitted to MiniAir display units and cup anemometers. Price covers additional probes over a single flow range or additionals ranges on the same probe...
View Product

CMC-141-LOGGER

Licence Key to allow a CMC-141 unit to log data. 1.5GB of internal memory, up to 250 million samples, and a maximum logging speed of 10Hz (limited to a number of recording channels)...
View Product

GC-60F

GEN II radio transmitter with wired sockets for connection to water detection cables. The GC-60F will transmit a 1.0 value for OK and a 0.0 value to indicate the presence of water on the active portion of the detection cable. Supplied with 4 x AA Alkaline batteries, stub antenna and..
View Product

MPU18V

100-240VAC 50/60Hz Mains Adapter supplied with 4-single fit mains plugs for UK, Euro, US and AUS/NZ. Powers SQHUB and Data Loggers. Output 18VDC, 1.6A..
View Product
MTN/MS002 - Quickfit to M8 Thread Adapter

MTN/MS002

Quick-fit to M8 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
View Product

UA-USB-485-ISO

USB to RS485 adapter, optically isolated, Panel or DIN Rail mountable. Supplied with 3 foot USB cable...
View Product

CMC-N16-LOGGER

Licence Key to allow a CMC-N16 unit to log data...
View Product
MTN/MS003 - Quickfit to M10 Thread Adapter

MTN/MS003

Quick-fit to M10 male stainless steel stud adapter. Provides a high rigidity connection but with reduced high frequency response...
View Product

133-220

General Purpose K-Type Penetration Probe, 100mm x 3.3mm diameter. Supplied with 3 metre PTFE Insulated Lead and a K Therm MiniPlug connector. Probe Temperature Range: -75 to +250°C, Response Time: <5 Seconds. Part Ref 133-220..
View Product

3462523

2 Metre Cable with IP67 M12 Mating Connector. Colour Coding: Pin 1 - Brown, Pin 2 - White, Pin 3 - Blue, Pin 4 - Black...
View Product

551-73

500ml Zero Solution for Dissolved Oxygen Electrode..
View Product

888257

Quasar 900 Series Extended Commissioning Kit, Covers Methane, Propane and Ethylene. The kit includes an alignment tool, a magnetic mode selector, 6 functional check filters (Part No. 888260-1, 88260-2, 888260-3, 888260-4, 888260-5 and 888260-6), socket keys and non-EX USB/RS485 harness converter kit.. Used for System installations and periodical function tests..
View Product

CONTACT US

8:30am to 5pm Monday to Thursday
8:30am to 3pm on Friday.

  • +44 (0) 1382 443000
  • info@omni.uk.com

A real person will answer the phone and deal with your enquiry.
You can also click the button below and fill in our online enquiry form.

Technical Sales

links

  • About
  • Contact
  • Custom Systems
  • Privacy & Cookies
  • Terms & Conditions

omni instruments

Omni Instruments Ltd,
Unit 1, 14 Nobel Road,
Wester Gourdie Industrial Estate,
Dundee, DD2 4UH, UK

Sales & Support

  • +44 (0) 1382 443000
  • info@omni.uk.com

Payments

mastercard-color
visa-color
amex-color
Copyright Omni Instruments 2026 | Design. Build. Host.

        We are here to help

        Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

        Call us on +44 (0)1382 443000