Uncategorised

Grid View
List View

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the..

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to..

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4..

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion..

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed...

SMP21 Smart Pyranometer

The SMP21 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP21 is identical to the CMP21 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA..

SNAPJU112

Replacement MiniAir Junior Micro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU212 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2112...

SNAPJU114

Replacement MiniAir Junior Micro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU214 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2114...

SNAPJU122

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU222 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2122...

SNAPJU124

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU224 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2124...

SNAPJU132

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU232 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2132...

SNAPJU134

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU234 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2134...

SNAPJU252

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2252...

SNAPJU254

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2254...

SNAPJU262

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2262...

SNAPJU264

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2264...

SO1-TWS-CL/U

TBox Nano - TwinSoft Suite Software. Full configuration Suite to program all TBox devices (version for Windows 95, 98, XP, 2000, NT, Vista, Windows 7 and 10). Includes WebForm and Report Studio. Programming of unlimited number of RTUs. Available for English, French and German languages - hardware key to be..

ADAPTOR1/4BSPF-1/4NPTM

1/4 inch BSP female to 1/4 inch NPT male adaptor. Converts a standard LEO2 manometers from 1/4 inch BSP to 1/4 inch NPT thread. Stainless Steel constructions suitable for low pressure applications only...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the bridge output signal and measure the torque applied to the shaft. Using the full bridge helps to diminish errors from any off-axis forces and increases ...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the bridge output signal and measure the torque applied to the shaft. Using the full bridge helps to diminish errors from any off-axis forces ...

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access. ...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications. ...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both. ...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4 and newer. Information display in real time on your smartphone. ...

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL. ...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices. ...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply. ...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion ...

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed. ...

SMP21 Smart Pyranometer

The SMP21 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP21 is identical to the CMP21 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA and these are identically configured to allow for easy installation and exchange during recalibration. The SMP21 has two, 2mm thick, high quality concentric domes which ...

SNAPJU112

Replacement MiniAir Junior Micro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU212 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2112. ...

SNAPJU114

Replacement MiniAir Junior Micro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU214 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2114. ...

SNAPJU122

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU222 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2122. ...

SNAPJU124

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU224 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2124. ...

SNAPJU132

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU232 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2132. ...

SNAPJU134

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU234 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2134. ...

SNAPJU252

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2252. ...

SNAPJU254

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2254. ...

SNAPJU262

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2262. ...

SNAPJU264

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2264. ...

SO1-TWS-CL/U

TBox Nano - TwinSoft Suite Software. Full configuration Suite to program all TBox devices (version for Windows 95, 98, XP, 2000, NT, Vista, Windows 7 and 10). Includes WebForm and Report Studio. Programming of unlimited number of RTUs. Available for English, French and German languages - hardware key to be placed on USB port - free lifetime upgrades ...

ADAPTOR1/4BSPF-1/4NPTM

1/4 inch BSP female to 1/4 inch NPT male adaptor. Converts a standard LEO2 manometers from 1/4 inch BSP to 1/4 inch NPT thread. Stainless Steel constructions suitable for low pressure applications only. ...

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque. A speed sensor for monitoring in dynamic applications, enabling direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to process the..

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

These SGR Series Transducers can be used to monitoring bi-directional rotary or static torque with an external electronics box. An integrated speed sensor enable the direct measurements of transmitted power and RPM. The SGR Series Transducers operate using a four-element strain gauge wheatstone bridge, which connects to a microcontroller to..

ENCL-SV600

Small ABS Enclosure, sealed to IP 65, suitable for housing one SV300 or SV600 AC Voltage Sensors. When purchased with AC Voltage Sensor, the sensor will be mounted and wired with supplied transformer. Enclosure is fitted with glands for access...

SGW1-2044-IA-MB-DF1

Modbus ASCII/RTU to DF1 Converter, 2 RS232 ports. Industrial Applications...

SharpEye Flame Detector.

The SharpEye Flame Detectors are compliant with European standard EN54-10. These units are also SIL2 and EX approved for Zone 1 hazardous areas. The SharpEye detectors are specifically designed for all fire types and can use one of several sensors, either in UV, IR or a combination of both...

SKYWATCH-BL-500

Skywatch Bluetooth anemometer for smartphone, measures wind speed (3-150 km/h, accuracy ±3%), wind direction, temperature (-25 to +60°C, accuracy ±3°C) humidity (0-100%, accuracy ±3%), barometric pressure (300-110 hPa, accuracy ±0.2 hPa) and UV index (0-15, accuracy ±1). In stainless steel case. Works with Android 4.4 and newer and IOS 8.4..

SLC10422-TTL

SLC10422-TTL single channel serial converter with RS422/TTL...

SLC22232

Dual Channel Serial Line Voltage Level Converter RS232 to/from RS422. Dimensions 1.53 x 0.628 inches). Provides two bi-directional channels, each of which converts RS232 signals from a computer to/from RS422 or TTL format for a variety of digital devices...

SLC2J09ADS

PC Interface Cable for Air Data System. Pre-built interface cable that connects ADS Series Air Data System (via mating connector) to a RS232 serial port. >48 inch (1.22m) long, has pre-tinned pigtails for 10-32 VDC external power supply...

SLC2J09SF

PC Interface Kit. Cable assembly comprising of 9 pin RS232 connecter wired through to the MIDGII miniature mating connector, with flying leads for the external MIDGII DC supply. The cable has the SLC2232 PCB fitted inline to make the RS422 to RS232 conversion..

SLC2JUSB

Pre-built interface cable that connects MIDG II (via mating connector) to a PC USB port. >1.22m long. No external power source needed...

SMP21 Smart Pyranometer

The SMP21 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP21 is identical to the CMP21 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA..

SNAPJU112

Replacement MiniAir Junior Micro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU212 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2112...

SNAPJU114

Replacement MiniAir Junior Micro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 11mm diameter x 15mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU214 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2114...

SNAPJU122

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU222 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2122...

SNAPJU124

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU224 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2124...

SNAPJU132

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU232 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2132...

SNAPJU134

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with an Aluminium turbine. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJunior anemometer probe, Part Ref: MINIJU234 or MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2134...

SNAPJU252

Replacement MiniAir Junior Mini snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2252...

SNAPJU254

Replacement MiniAir Junior Mini snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 22mm diameter x 28mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2254...

SNAPJU262

Replacement MiniAir Junior Macro snap head with an air velocity range of 20 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2262...

SNAPJU264

Replacement MiniAir Junior Macro snap head with an air velocity range of 40 m/s with a synthetic plastic construction snap head with a Steel vane. Sensing head 85mm diameter x 80mm. This snap head may be used with the MiniAirJuniorEx Anemometer probe, Part Ref MIEXJU2264...

SO1-TWS-CL/U

TBox Nano - TwinSoft Suite Software. Full configuration Suite to program all TBox devices (version for Windows 95, 98, XP, 2000, NT, Vista, Windows 7 and 10). Includes WebForm and Report Studio. Programming of unlimited number of RTUs. Available for English, French and German languages - hardware key to be..

ADAPTOR1/4BSPF-1/4NPTM

1/4 inch BSP female to 1/4 inch NPT male adaptor. Converts a standard LEO2 manometers from 1/4 inch BSP to 1/4 inch NPT thread. Stainless Steel constructions suitable for low pressure applications only...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Uncategorised

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

SMP21 Smart Pyranometer

SNAPJU112

SNAPJU114

SNAPJU122

SNAPJU124

SNAPJU132

SNAPJU134

SNAPJU252

SNAPJU254

SNAPJU262

SNAPJU264

SO1-TWS-CL/U

ADAPTOR1/4BSPF-1/4NPTM

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

SMP21 Smart Pyranometer

SNAPJU112

SNAPJU114

SNAPJU122

SNAPJU124

SNAPJU132

SNAPJU134

SNAPJU252

SNAPJU254

SNAPJU262

SNAPJU264

SO1-TWS-CL/U

ADAPTOR1/4BSPF-1/4NPTM

SGR Series Rotary Transducer For Torque, Speed & Power Measurements

SGR Series Rotary Transducer For Torque, Speed & Power Measurements – External Electronics

ENCL-SV600

SGW1-2044-IA-MB-DF1

SharpEye Flame Detector.

SKYWATCH-BL-500

SLC10422-TTL

SLC22232

SLC2J09ADS

SLC2J09SF

SLC2JUSB

SMP21 Smart Pyranometer

SNAPJU112

SNAPJU114

SNAPJU122

SNAPJU124

SNAPJU132

SNAPJU134

SNAPJU252

SNAPJU254

SNAPJU262

SNAPJU264

SO1-TWS-CL/U

ADAPTOR1/4BSPF-1/4NPTM

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.