Uncategorised

Grid View
List View

Edit Content

CA-XSA-4W

Wall Mount Enclosure for WLM4 water detection module. ...

CA00SD2

Protection Cap for all panel-mounted connectors with tight thread. ...

CA00SD4

Protection Cap for all panel-mounted sockets, with tight thread. ...

CA3GD

Panel-mounted socket. 3 pin Female Connection ...

CA3GS

Panel-mounted connector. 3 pin Female Connection ...

CA3LD

Cable Socket. 3 pin Female Connection ...

CA3LS

Cable Connector. 3 pin Male Connection. ...

CA6GD

Panel-mounted Socket. 6 pin Female Connection. ...

CA6GS

Panel-mounted connector. 6 pin Female Connection ...

CA6LD

Cable Socket. 6 pin Female Connection ...

CA6LS

Cable Connector. 6 pin male connection. ...

Cable Gland Fitted

System integrated cable gland fitted to a purchased enclosure by our technicians. ...

CDI 25

CDI 25 Compressed Air Flow Meter for local display with alarm functions. Suitable for compressed air and Nitrogen. Unit comes with two band clamps, 4 digit LED digital display. Accuracy 5% of RDG +1% FSD, Operating temperature 4-49°C. ...

CDI 6200

Compressed air flow meter, for pipe sizes 1/2 to 1 1/2 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CDI 6400

Compressed air flow meter, for pipe sizes 2 inch to 6 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CF916-1/8

Bored through stainless steel fitting for the PT916 probe. 1/8" NPT thread. ...

CGR3 Pyrgeometer

The CGR3 is a pyrgeometer, designed to provide an economical solution for meteorological measurements of downward atmospheric long wave radiation. The CGR3 uses a thermopile detector and has a sensitivity of 5 to 15µV/Wm² in a spectral range of 4.5 to 42nm. The CGR3 use a flat silicon window with ...

CMP3

CMP 3 Pyranometer, ISO Second Class, is suitable for solar irradiance measurements in spectral ranges of 310 to 2800nm up to a maximum of 2,000 W/m² with response time <18 seconds and typical sensitivity 10µV/W/m² that varies less than 5 % from -10 to +40°C. The pyranometer uses a 4mm ...

COLGSM-868MHZ

Colinear GSM Wall mount antenna, 3dB gain with 5m of Cable and SMA male connector. Supplied with mounting bracket. ...

Corrosive Chemical Oval Gear Meter

The CR range of oval gear meters for corrosive chemical applications. Made with a PPS body, Hastelloy C shaft and PPS Rotors. ...

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

The CP11 handheld instrument is an economical multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. Operating ranges: -20 to +60°C, 0.1 to 99.95% RH and 0-5,000ppm CO2, calculated Dew Point and Wet Bulb Temperature. 18,000 values with time stamp, automatic recording (%RH/°C/ppm), 99 single values with ...

CRE-S100-CAB

RS232 connection cable with CRE subsea connectors, depth rated to 4000 metres ...

CS-U-VL10-0

Stainless Steel rounded end probe. 125mmx3.2mm U bead, with 10m VS cable. ...

CS-UU-VL5-0

Stainless Steel rounded end probe. 125mmx3.2mm UU bead, with 5m VS cable. ...

Edit Content

CA-XSA-4W

Wall Mount Enclosure for WLM4 water detection module. ...

CA00SD2

Protection Cap for all panel-mounted connectors with tight thread. ...

CA00SD4

Protection Cap for all panel-mounted sockets, with tight thread. ...

CA3GD

Panel-mounted socket. 3 pin Female Connection ...

CA3GS

Panel-mounted connector. 3 pin Female Connection ...

CA3LD

Cable Socket. 3 pin Female Connection ...

CA3LS

Cable Connector. 3 pin Male Connection. ...

CA6GD

Panel-mounted Socket. 6 pin Female Connection. ...

CA6GS

Panel-mounted connector. 6 pin Female Connection ...

CA6LD

Cable Socket. 6 pin Female Connection ...

CA6LS

Cable Connector. 6 pin male connection. ...

Cable Gland Fitted

System integrated cable gland fitted to a purchased enclosure by our technicians. ...

CDI 25

CDI 25 Compressed Air Flow Meter for local display with alarm functions. Suitable for compressed air and Nitrogen. Unit comes with two band clamps, 4 digit LED digital display. Accuracy 5% of RDG +1% FSD, Operating temperature 4-49°C. ...

CDI 6200

Compressed air flow meter, for pipe sizes 1/2 to 1 1/2 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CDI 6400

Compressed air flow meter, for pipe sizes 2 inch to 6 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CF916-1/8

Bored through stainless steel fitting for the PT916 probe. 1/8" NPT thread. ...

CGR3 Pyrgeometer

The CGR3 is a pyrgeometer, designed to provide an economical solution for meteorological measurements of downward atmospheric long wave radiation. The CGR3 uses a thermopile detector and has a sensitivity of 5 to 15µV/Wm² in a spectral range of 4.5 to 42nm. The CGR3 use a flat silicon window with an internal thin film coating to filter out short-wave solar radiation but allows infrared radiation to reach the broadband thermopile detector. A pair of CGR3's ...

CMP3

CMP 3 Pyranometer, ISO Second Class, is suitable for solar irradiance measurements in spectral ranges of 310 to 2800nm up to a maximum of 2,000 W/m² with response time <18 seconds and typical sensitivity 10µV/W/m² that varies less than 5 % from -10 to +40°C. The pyranometer uses a 4mm dome to protect the thermopile from external influences. CMP3s are fitted with 10m of cable for connection to amplifier, data loggers and other instrumentation. ...

COLGSM-868MHZ

Colinear GSM Wall mount antenna, 3dB gain with 5m of Cable and SMA male connector. Supplied with mounting bracket. ...

Corrosive Chemical Oval Gear Meter

The CR range of oval gear meters for corrosive chemical applications. Made with a PPS body, Hastelloy C shaft and PPS Rotors. ...

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

The CP11 handheld instrument is an economical multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. Operating ranges: -20 to +60°C, 0.1 to 99.95% RH and 0-5,000ppm CO2, calculated Dew Point and Wet Bulb Temperature. 18,000 values with time stamp, automatic recording (%RH/°C/ppm), 99 single values with time stamp, manual recording, (%RH/°C/DP/Tw/ppm) 4 x AA batteries (50 Hours Life), or AC mains Power adapter. ...

CRE-S100-CAB

RS232 connection cable with CRE subsea connectors, depth rated to 4000 metres ...

CS-U-VL10-0

Stainless Steel rounded end probe. 125mmx3.2mm U bead, with 10m VS cable. ...

CS-UU-VL5-0

Stainless Steel rounded end probe. 125mmx3.2mm UU bead, with 5m VS cable. ...

CA-XSA-4W

Wall Mount Enclosure for WLM4 water detection module. ...

CA00SD2

Protection Cap for all panel-mounted connectors with tight thread. ...

CA00SD4

Protection Cap for all panel-mounted sockets, with tight thread. ...

CA3GD

Panel-mounted socket. 3 pin Female Connection ...

CA3GS

Panel-mounted connector. 3 pin Female Connection ...

CA3LD

Cable Socket. 3 pin Female Connection ...

CA3LS

Cable Connector. 3 pin Male Connection. ...

CA6GD

Panel-mounted Socket. 6 pin Female Connection. ...

CA6GS

Panel-mounted connector. 6 pin Female Connection ...

CA6LD

Cable Socket. 6 pin Female Connection ...

CA6LS

Cable Connector. 6 pin male connection. ...

Cable Gland Fitted

System integrated cable gland fitted to a purchased enclosure by our technicians. ...

CDI 25

CDI 25 Compressed Air Flow Meter for local display with alarm functions. Suitable for compressed air and Nitrogen. Unit comes with two band clamps, 4 digit LED digital display. Accuracy 5% of RDG +1% FSD, Operating temperature 4-49°C. ...

CDI 6200

Compressed air flow meter, for pipe sizes 1/2 to 1 1/2 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CDI 6400

Compressed air flow meter, for pipe sizes 2 inch to 6 inch , clamp on type, accuracy 5% of RDG +1% FSD, operating temperature 4-49 C. With 4-20mA, pulse outputs. Optional MODBUS RTU RS485 O/P, NEMA4 IP67 enclosure. ...

CF916-1/8

Bored through stainless steel fitting for the PT916 probe. 1/8" NPT thread. ...

CGR3 Pyrgeometer

The CGR3 is a pyrgeometer, designed to provide an economical solution for meteorological measurements of downward atmospheric long wave radiation. The CGR3 uses a thermopile detector and has a sensitivity of 5 to 15µV/Wm² in a spectral range of 4.5 to 42nm. The CGR3 use a flat silicon window with ...

CMP3

CMP 3 Pyranometer, ISO Second Class, is suitable for solar irradiance measurements in spectral ranges of 310 to 2800nm up to a maximum of 2,000 W/m² with response time <18 seconds and typical sensitivity 10µV/W/m² that varies less than 5 % from -10 to +40°C. The pyranometer uses a 4mm ...

COLGSM-868MHZ

Colinear GSM Wall mount antenna, 3dB gain with 5m of Cable and SMA male connector. Supplied with mounting bracket. ...

Corrosive Chemical Oval Gear Meter

The CR range of oval gear meters for corrosive chemical applications. Made with a PPS body, Hastelloy C shaft and PPS Rotors. ...

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

The CP11 handheld instrument is an economical multiple parameter meter that simultaneously measures and records CO2, humidity and temperature. Operating ranges: -20 to +60°C, 0.1 to 99.95% RH and 0-5,000ppm CO2, calculated Dew Point and Wet Bulb Temperature. 18,000 values with time stamp, automatic recording (%RH/°C/ppm), 99 single values with ...

CRE-S100-CAB

RS232 connection cable with CRE subsea connectors, depth rated to 4000 metres ...

CS-U-VL10-0

Stainless Steel rounded end probe. 125mmx3.2mm U bead, with 10m VS cable. ...

CS-UU-VL5-0

Stainless Steel rounded end probe. 125mmx3.2mm UU bead, with 5m VS cable. ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Uncategorised

CA-XSA-4W

CA00SD2

CA00SD4

CA3GD

CA3GS

CA3LD

CA3LS

CA6GD

CA6GS

CA6LD

CA6LS

Cable Gland Fitted

CDI 25

CDI 6200

CDI 6400

CF916-1/8

CGR3 Pyrgeometer

CMP3

COLGSM-868MHZ

Corrosive Chemical Oval Gear Meter

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

CRE-S100-CAB

CS-U-VL10-0

CS-UU-VL5-0

CA-XSA-4W

CA00SD2

CA00SD4

CA3GD

CA3GS

CA3LD

CA3LS

CA6GD

CA6GS

CA6LD

CA6LS

Cable Gland Fitted

CDI 25

CDI 6200

CDI 6400

CF916-1/8

CGR3 Pyrgeometer

CMP3

COLGSM-868MHZ

Corrosive Chemical Oval Gear Meter

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

CRE-S100-CAB

CS-U-VL10-0

CS-UU-VL5-0

CA-XSA-4W

CA00SD2

CA00SD4

CA3GD

CA3GS

CA3LD

CA3LS

CA6GD

CA6GS

CA6LD

CA6LS

Cable Gland Fitted

CDI 25

CDI 6200

CDI 6400

CF916-1/8

CGR3 Pyrgeometer

CMP3

COLGSM-868MHZ

Corrosive Chemical Oval Gear Meter

CP11 – Handheld Instrument for Temp, RH and CO2 Measurements

CRE-S100-CAB

CS-U-VL10-0

CS-UU-VL5-0

Contact us

8:30 AM to 5 PM Monday to Thursday8:30 AM to 3 PM on Friday.

We are here to help

Enquire now

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.