Load Button for Compression Loads
Load buttons are used to align forces through the principle axis of the load cell. This reduces the effects of extraneous forces and improves the performance of the load cell. These load buttons are suitable for all compressive load cells on our website with threaded ports...
LOG-PT1000-ET030-RC
Wireless temperature data logger with an external PT1000 temperature probe with 30cm cable, range -40 to +85°C. Internal flash memory for up to 500,000 measured values with serial number, time and date. Suitable for Long-term logging of up to 6 years without battery replacement. IP69 white plastic housing...
LOG-PT1000-RC
Wireless temperature data logger with an internal PT1000 temperature probes, range -40 to +85°C. Internal flash memory for up to 500,000 measured values with serial number, time and date. Suitable for Long-term logging of up to 6 years without battery replacement. IP69 white plastic housing...
LogBox Temperature & Humidity Data Logger.
The LogBox-RHT-LCD is a dual channel data logger with integrated sensors for monitoring temperature and relative humidity. The LCD display will show current readings as well as minimum and maximum values from the logging period, plus the LogChart II software and IRLink allows you to export the data to a..
LPMS 9-Axis IMU AHRS Motion Sensor with Wired Connections
The LPMS Motion Sensor with wired connections are a miniature inertial measurement unit (IMU) and attitude and heading reference system (AHRS) sensor with options for CANBus, USB, RS232 or UART TTL outputs. The units are very versatile and capable of performing accurate, high speed orientation and displacement measurements. Each unit..
LS100-15FT
Low cost light sensor, wide dynamic range, 15FT cable..
LS100-4FT
Low Cost light sensor, wide dynamic range, 4 ft cable...
LSI Inclinometer
LSI Series gravity referenced servo inclinometer, linearity 0.02% FRO, operating temperature -20 to +80°C, output 5vDC.Power supply 9 - 36vDC or 15vDC, Range 14.5, 30 or 90 degrees...
LSOC/P Inclinometer
LSOC/P Gravity-Referenced Servo Inclinometer. Ranges ±1°, ±3°, ±14.5°, ±30° or ±90° . Power supply 12 to 18vDC, for a 5vDC output, or 20-30vDC, for a 4-20mA output. Options for solder pins or 6-way connector output. Operating temperature -18 to +70°C...
LSTS
Laser Sighting Tool. This tool screws onto the front of the PyroCouple or PyroMini sensor and is used only during installation to aim the sensor at the required point. Activated by push button...
M12x1.5
M12 Cable gland with a 1.5mm thread. Cable Diameter range 3 to 6.5mm. Panel Hole 12mm...
M16x1.5
M16 Cable gland with a 1.5mm thread. Cable Diameter range 5 to 10mm. Panel Hole 16mm..
M20x1.5
M20 Cable gland with a 1.5mm thread. Cable Diameter range 10 to 14mm. Panel Hole 20mm..
M25x1.5
M16 Cable gland with a 1.5mm thread. Cable Diameter range 13 to 18mm. Panel Hole 25mm..
M31
M31 Multiplexer for XR440 Pocket Loggers. Allows for up to 3 XR440 Pocket Loggers to be networked with one M31. Multiple M31 may be daisy-chained up to a maximum of 255 Pocket Loggers. Internal Lithium battery, average life 3 years...
MA-U
Amplifier MA-U with adjustable input ranges ±10mV, ±100mV, ±1V or ±10V. Output 0-5V or ±5V. With 10kHz bandwidth, it is ideal for dynamic signals...
MA-UI
Amplifier MA-UI with adjustable input ranges +/-10mV....+/-10V, +/-2mA...+/-200mA. Output 0-5v DC. With 10kHz bandwidth, it is ideal for dynamic signals...
MA-UNI
Amplifier MA-UNI with adjustable input ranges suitable for mV, Voltage, Current, Resistance (Thermocouple), Strain gauges, LVDTs and linear potentiometers. Output +/-5vDC. With 10kHz bandwidth, it is ideal for dynamic signals...
MAG930 Battery Operated Magnetic Flowmeter
MAG930 battery powered electromagnetic flowmeter, PN16 (PN10 above 200mm) with display unit to display rate & total (IP67), with USB Modbus communications, calibration and FlowAssistant configuration software, calibration certificate. Integral programmable data logger as standard...
MAL-FU
MAL-FU Series miniature amplifier suitable for frequency input with ranges of 0-100Hz, 0-1kHz or 0 to 10kHz. Amplifier provides proportional 0-5vDC output with galvanic isolation...
MAL-I20MA
MAL-I Series miniature amplifier suitable for input ranges of ±20mA. Amplifier provides a proportional ±5vDC output and 5vDC sensor supply with a 0.2% accuracy and selectable cut off frequencies of (2, 15, 340Hz)..
MAL-ISO1
Galvanically isolating signal amplifier for input ranges +/-1v or 4-20mA, output +/- 5v, frequency range 0-160 Hz...
MAL-PT100
Miniature Amplifiers for PT100 Input. Suitable for PT100 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT100 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy:..
MAL-PT1000
Miniature Amplifiers for PT1000 Input. Suitable for PT1000 temperature input ranges between -60°C and 300°C. 2-, 3-, or 4-wire PT1000 inputs and 8Hz or 66Hz cut-off frequency and selectable via solder jumpers. Amplifier provides a 1mA sensor supply and a proportional linearised output in the range -1 to 5vDC. Accuracy:..
