omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content
Need Help?
Edit Content

Uncategorised

Edit Content

111-993

P11/CER/DJ/LiCl Glass Bodied Non Aqueous pH Electrode for a pH range of 0-14. Combination electrode with a Silver Chloride, liquid filled, double annular ceramic junction. Eo point -25 to +25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 80 C. Suitable..
View Product

9203A1B1

Solenoid and alarm driver, 2 channel driver output, 2 PNP inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

9203B1B

Solenoid and alarm driver, ATEX approved 2 channel driver output, digital switch input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

BM25KITCHD25

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 25m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

MCDC8F

Blanking cap for miniature series MCIL type subsea connector, 8 pin female, to suit MCIL8M inline connector or MCBH8M bulkhead connectors...
View Product
SharpEye 40/40C-LB Ultraviolet Infrared (UV/IR) Flame Detector

SharpEye 40/40C-LB Flame Detector

SharpEye 40/40C-LB Integrated Ultraviolet Infrared (UV/IR) Flame Detector. 2 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC...
View Product
SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-LB Flame Detector

SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 2.5 to 3.0µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free..
View Product

Type 595

Type 595 temperature probe with stainless steel stem 6mm diameter, inegral 100mm extension, with connection head...
View Product

WindObserver90

WindObserver 90 Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind speed range 0-100m/s, wind direction 0-359 degrees . Optional heating and analogue outputs, plus various connection and base mounting options. Ideal for extreme weather conditions...
View Product

9203A1B2

Solenoid and alarm driver, 2 channel driver output, 2 NPN inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

BM25KITCHD50

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 50m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

MCDC8M

Blanking cap for miniature series MCIL type subsea connector, 8 pin male, to suit MCIL8F inline connector or MCBH8F bulkhead connectors...
View Product

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew,..
View Product

BM25KITCHD100

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 100m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

1081643

Low power reed switch relay, nominal supply voltage 5V, current 3.3mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 150vDC...
View Product

1081648

Low power reed switch relay, nominal supply voltage 12V, current 8mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 200vAC...
View Product

111-702

P11/HA Glass Bodied High Alkaline pH Electrode for a pH range of 0-14. Combination electrode with a Silver/Silver Chloride reference wire and ceramic junction. Eo point 0 to +/-25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 100 C. Suitable for..
View Product

9203A2A

Solenoid and alarm driver, 1 channel driver output, 1 digital switch input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. 1 relay output...
View Product

9203B1B1

Solenoid and alarm driver, ATEX approved 2 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product
EL-USB-1-PRO Industrial Temperature Data Logger

EL-USB-1-PRO Industrial Temperature Data Logger

The EL-USB-1-PRO industrial data logger measures and stores up to 32,510 temperature readings over a -40 to +125°C (-40 to +257°F) range. The EL-USB-1-PRO is housed in a stainless steel housing. The logger can be simply plugged into a USB port to download the data. Data can then be graphed,..
View Product
SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared Flame Detector

SharpEye 40/40C-L4B Flame Detector

SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA..
View Product
SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-L4B Flame Detector

SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free..
View Product

9203B1B2

Solenoid and alarm driver, ATEX approved 2 channel driver output, NPN input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

12103152

Cold Weather Cover. The Cold Weather Cover is made of a durable nylon shell filled with insulation and provides excellent protection in all weather conditions. The cover installs easily by slipping over the main body of the 2AP and is equipped with convenient fastening flaps for quick and simple installation...
View Product
Edit Content

111-993

P11/CER/DJ/LiCl Glass Bodied Non Aqueous pH Electrode for a pH range of 0-14. Combination electrode with a Silver Chloride, liquid filled, double annular ceramic junction. Eo point -25 to +25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 80 C. Suitable for pH monitoring in liquids/Non aqueous solutions. ...
View Product

9203A1B1

Solenoid and alarm driver, 2 channel driver output, 2 PNP inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs. ...
View Product

9203B1B

Solenoid and alarm driver, ATEX approved 2 channel driver output, digital switch input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs. ...
View Product

BM25KITCHD25

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 25m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using multiple LEL, IR, PID sensors, OR aspirated OR wireless versions. ...
View Product

MCDC8F

Blanking cap for miniature series MCIL type subsea connector, 8 pin female, to suit MCIL8M inline connector or MCBH8M bulkhead connectors. ...
View Product
SharpEye 40/40C-LB Ultraviolet Infrared (UV/IR) Flame Detector

SharpEye 40/40C-LB Flame Detector

SharpEye 40/40C-LB Integrated Ultraviolet Infrared (UV/IR) Flame Detector. 2 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC. All via 17 terminal accessed through 2 x M25 or 2 x ¾" NPT cable entries. Heavy duty Copper free Aluminium enclosure with red polyurethane ...
View Product
SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-LB Flame Detector

SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 2.5 to 3.0µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC. All via 17 terminal accessed through 2 ...
View Product

Type 595

Type 595 temperature probe with stainless steel stem 6mm diameter, inegral 100mm extension, with connection head. ...
View Product

WindObserver90

WindObserver 90 Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind speed range 0-100m/s, wind direction 0-359 degrees . Optional heating and analogue outputs, plus various connection and base mounting options. Ideal for extreme weather conditions. ...
View Product

9203A1B2

Solenoid and alarm driver, 2 channel driver output, 2 NPN inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs. ...
View Product

BM25KITCHD50

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 50m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using multiple LEL, IR, PID sensors, OR aspirated OR wireless versions. ...
View Product

MCDC8M

Blanking cap for miniature series MCIL type subsea connector, 8 pin male, to suit MCIL8F inline connector or MCBH8F bulkhead connectors. ...
View Product

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew, plus it will help drying the surface after the precipitation has stopped falling. ...
View Product

BM25KITCHD100

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 100m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using multiple LEL, IR, PID sensors, OR aspirated OR wireless versions. ...
View Product

1081643

Low power reed switch relay, nominal supply voltage 5V, current 3.3mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 150vDC. ...
View Product

1081648

Low power reed switch relay, nominal supply voltage 12V, current 8mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 200vAC. ...
View Product

111-702

P11/HA Glass Bodied High Alkaline pH Electrode for a pH range of 0-14. Combination electrode with a Silver/Silver Chloride reference wire and ceramic junction. Eo point 0 to +/-25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 100 C. Suitable for pH monitoring in photographic solutions and where sodium is present. ...
View Product

9203A2A

Solenoid and alarm driver, 1 channel driver output, 1 digital switch input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. 1 relay output. ...
View Product

9203B1B1

Solenoid and alarm driver, ATEX approved 2 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs. ...
View Product
EL-USB-1-PRO Industrial Temperature Data Logger

EL-USB-1-PRO Industrial Temperature Data Logger

The EL-USB-1-PRO industrial data logger measures and stores up to 32,510 temperature readings over a -40 to +125°C (-40 to +257°F) range. The EL-USB-1-PRO is housed in a stainless steel housing. The logger can be simply plugged into a USB port to download the data. Data can then be graphed, printed and exported to other applications using the free EasyLog software. The internal battery is a replaceable long-life lithium battery which will last for up ...
View Product
SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared Flame Detector

SharpEye 40/40C-L4B Flame Detector

SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC. All via 17 terminal accessed through 2 x M25 or 2 x ¾" NPT ...
View Product
SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-L4B Flame Detector

SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC. All via 17 terminal accessed through 2 ...
View Product

9203B1B2

Solenoid and alarm driver, ATEX approved 2 channel driver output, NPN input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs. ...
View Product

12103152

Cold Weather Cover. The Cold Weather Cover is made of a durable nylon shell filled with insulation and provides excellent protection in all weather conditions. The cover installs easily by slipping over the main body of the 2AP and is equipped with convenient fastening flaps for quick and simple installation. Extends operating temperature of the 2AP from 0 to 50 C to -20 C to 50 C and down to -50 C for heated units. ...
View Product

111-993

P11/CER/DJ/LiCl Glass Bodied Non Aqueous pH Electrode for a pH range of 0-14. Combination electrode with a Silver Chloride, liquid filled, double annular ceramic junction. Eo point -25 to +25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 80 C. Suitable..
View Product

9203A1B1

Solenoid and alarm driver, 2 channel driver output, 2 PNP inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

9203B1B

Solenoid and alarm driver, ATEX approved 2 channel driver output, digital switch input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

BM25KITCHD25

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 25m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

MCDC8F

Blanking cap for miniature series MCIL type subsea connector, 8 pin female, to suit MCIL8M inline connector or MCBH8M bulkhead connectors...
View Product
SharpEye 40/40C-LB Ultraviolet Infrared (UV/IR) Flame Detector

SharpEye 40/40C-LB Flame Detector

SharpEye 40/40C-LB Integrated Ultraviolet Infrared (UV/IR) Flame Detector. 2 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA signal with HART Comms, plus RS485 Modbus Comms. Power Supply: 18-32vDC...
View Product
SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-LB Flame Detector

SharpEye 40/40D-LB Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 2.5 to 3.0µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free..
View Product

Type 595

Type 595 temperature probe with stainless steel stem 6mm diameter, inegral 100mm extension, with connection head...
View Product

WindObserver90

WindObserver 90 Ultrasonic Anemometer with an IP66 Stainless Steel housing. Wind speed range 0-100m/s, wind direction 0-359 degrees . Optional heating and analogue outputs, plus various connection and base mounting options. Ideal for extreme weather conditions...
View Product

9203A1B2

Solenoid and alarm driver, 2 channel driver output, 2 NPN inputs, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

BM25KITCHD50

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 50m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

MCDC8M

Blanking cap for miniature series MCIL type subsea connector, 8 pin male, to suit MCIL8F inline connector or MCBH8F bulkhead connectors...
View Product

MR42 Rain Sensor

The MR42 is a capacitance type rain sensor with an output (open collector) for either raining or not raining condition. The green sensor surface sensor is coated to protect against pollution and is heated a few degrees above ambient to ensure that it is not affected by fog or dew,..
View Product

BM25KITCHD100

BM25 Intrinsically Safe Trickle Charge Kit. Kit includes two IS power supply and wiring arrangement with 100m of cable. The Dual BM25 Intrinsically Safe Trickle charger which includes an additional IS power module, is required to provide an adequate trickle charge rate to continuously maintain a BM25 battery when using..
View Product

1081643

Low power reed switch relay, nominal supply voltage 5V, current 3.3mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 150vDC...
View Product

1081648

Low power reed switch relay, nominal supply voltage 12V, current 8mA. Single pole single throw. Operating time 0.5mS, release time 0.1mS. Max switching current 500mA, max switching voltage 200vAC...
View Product

111-702

P11/HA Glass Bodied High Alkaline pH Electrode for a pH range of 0-14. Combination electrode with a Silver/Silver Chloride reference wire and ceramic junction. Eo point 0 to +/-25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 100 C. Suitable for..
View Product

9203A2A

Solenoid and alarm driver, 1 channel driver output, 1 digital switch input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. 1 relay output...
View Product

9203B1B1

Solenoid and alarm driver, ATEX approved 2 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product
EL-USB-1-PRO Industrial Temperature Data Logger

EL-USB-1-PRO Industrial Temperature Data Logger

The EL-USB-1-PRO industrial data logger measures and stores up to 32,510 temperature readings over a -40 to +125°C (-40 to +257°F) range. The EL-USB-1-PRO is housed in a stainless steel housing. The logger can be simply plugged into a USB port to download the data. Data can then be graphed,..
View Product
SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared Flame Detector

SharpEye 40/40C-L4B Flame Detector

SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA..
View Product
SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared Flame Detector

SharpEye 40/40D-L4B Flame Detector

SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free..
View Product

9203B1B2

Solenoid and alarm driver, ATEX approved 2 channel driver output, NPN input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
View Product

12103152

Cold Weather Cover. The Cold Weather Cover is made of a durable nylon shell filled with insulation and provides excellent protection in all weather conditions. The cover installs easily by slipping over the main body of the 2AP and is equipped with convenient fastening flaps for quick and simple installation...
View Product

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry
Sales & Technical support

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Call us on +44 (0)1382 443000

Enquire now