9203B1B1
Solenoid and alarm driver, ATEX approved 2 channel driver output, PNP input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
SharpEye 40/40C-L4B Flame Detector
SharpEye 40/40C-L4B Dual Spectrum Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Response time: Typically< 5 Seconds. 0-5V analogue output, SPST Volt Free Alarm, Fault and Auxiliary relays. Stepped 0-20mA..
SharpEye 40/40D-L4B Flame Detector
SharpEye 40/40D-L4B Ultra Fast Ultraviolet Infrared (UV/IR) Flame Detector. Spectral Response: Ultraviolet: 0.185 to 0.260µm; Infrared: 4.3 to 4.8µm, 3 sensitivity ranges and Field of View of 100° Horizontal & 95° Vertical. Standard (<5 secs), Ultra Fast (<20msecs) and High speed response of 50mSecs. 0-5V analogue output, SPST Volt Free..
9203B1B2
Solenoid and alarm driver, ATEX approved 2 channel driver output, NPN input, SIL 2, low current version (35 mA), 19.2 - 31.2 VDC supply. 2 relay outputs...
12103152
Cold Weather Cover. The Cold Weather Cover is made of a durable nylon shell filled with insulation and provides excellent protection in all weather conditions. The cover installs easily by slipping over the main body of the 2AP and is equipped with convenient fastening flaps for quick and simple installation...
123-212
Flexible High Temperature K Type Thermocouple, stainless steel 130mm x 3mm diameter. ABS/Nylon Hexagonal Handle with 1 metre straight PVC lead terminated with a K Therm Plug connector. Maximum probe temperature 1,100 C, Hexagonal Handle 105 C and PVC cable 80 C...
133-363
PTFE insulated exposed junction wire probes, K Type Thermocouple, 2000mm x 1.5mm diameter, terminated with a K Type Thermocouple Plug connector. Maximum probe temperature 250 C...
133-373
Heavy duty PTFE insulated exposed junction wire probes, K Type Thermocouple, 2000mm x 2.4mm diameter, terminated with a K Therm Plug connector. Maximum probe temperature 250 C...
SMP21 Smart Pyranometer
The SMP21 Pyranometer is a secondary standard pyranometer with an amplified analogue and RS485 Modbus RTU output. The SMP21 is identical to the CMP21 pyranometer but includes a Modbus interface allowing for an improved response time and rescaleable, temperature corrected measurement data. The amplified output options are 0-1V or 4-20mA..
10130007
ComNav G1 GNSS Satellite Compass with G3 Colour Display. Output: NMEA2000. Update rate: Heading & position updates at up to 20 times per second, and can operate at sustained turn rates up to 45° per second. Power Supply 10 to 36vDC (240mA @ 12vDC). The G1 contains a ComNav receiver..
111-761
P11 Protected Bulb pH Electrode for a pH range of 0-14. Combination electrode with a Silver/Silver Chloride, single porous Teflon junction. Eo point 0 to +/-25mV. Shaft dimensions (approx) 12mm diameter and 120mm length. BNC connector with 1m cable. Operating temperature 0 to 100 C. Suitable for pH monitoring where..
321.01.55.15.05.1.4
PTM/N submersible depth sensor, range 0 to 1 BarG (0-10mWG). Closed version with standard Viton seals and 12m PUR cable connection. Output - 2-wire, 4-20mA. Accuracy ±0.25%. Compensated temperature range -5 to 50°C..
9106A2A
Single channel isolated HART transparent repeater, 4-20mA input, 4ƒ-20 mA output, power supply 19.2 - 31.2, Uo=25.6 V, SIL2 certified to IEC 61508..
9106B2A
Single channel isolated HART transparent repeater ATEX approved I.S., 4-20mA input, 4ƒ-20 mA output, power supply 19.2 - 31.2, Uo= 25.6V, SIL2 certified to IEC 61508..
9203A2A1
Solenoid and alarm driver, 1 channel driver output, 1 PNP input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. 1 relay output...
9203B2A
Solenoid and alarm driver, ATEX approved 1 channel driver output, digital switch input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. Relay output...
B-563
20 channel input terminal, Multi-Input type. Suitable for the GL860 data logger...
RX250-AL
GEN II Receiver logger for up to 250 channels over 125 transmitters. Dual RS232 serial ports, alarm and GSM text output, LCD display, internal memory for 247.000 readings and 24 hour built-in standby battery (6 x NiMh AA batteries). Supplied with LC68 lead, MP12U AC power supply, detachable antenna, LC-TX..
SOL-CSA-OMNI-0030
Switch to logger cable for SW2 unit. 5 metre cable fitted with a Birns MCIL5M on switch end and a Birns SCIL4F on the logger end...
14891
Transport Case for BD300 Chart Recorder...
9203A2A2
Solenoid and alarm driver, 1 channel driver output, 1 NPN input, SIL 2, high current version (50-60 mA), 19.2 - 31.2 VDC supply. 1 relay output...
RX250-AL-1M
GEN II Receiver logger for up to 250 channels over 125 transmitters. Dual RS232 serial ports, alarm and GSM text output, LCD display, internal memory for 1 million readings and 24 hour built-in standby battery (6 x NiMh AA batteries). Supplied with LC68 lead, MP12U AC power supply, detachable antenna,..
SOL-CSA-OMNI-0031
Battery to switch cable. 5Mtrs cable fitted with a Birns SCOM4F c/w MLSA Locking sleeve on one end and a Birns SCOM4M c/w MLSA Locking sleeve on the other end. Overall length 5Mtrs...
RX250-AL-2M
GEN II Receiver logger for up to 250 channels over 125 transmitters. Dual RS232 serial ports, alarm and GSM text output, LCD display, internal memory for 2 million readings and 24 hour built-in standby battery (6 x NiMh AA batteries). Supplied with LC68 lead, MP12U AC power supply, detachable antenna,..
