DigiRail Connect – Ethernet I/O Module
The DigiRail Connect has eight models with five different channel types: digital input channels; analogue input channels; digital output channels; relay output channels; and analog output channels. The connectivity of DigiRail connect allows it to be used as slave Modbus RTU device in RS485 networks or as a server Modbus..
DigiRail I/O Modules
The DigiRail Modules are a set of small DIN Rail mounted acquisition modules that will accept a range of different inputs. Specific units can be configured to accept mA, V, mV, PT100, Thermocouple or digital pulse inputs, plus one unit provides 2 relay outputs. The unit will connect to a..
RME1 Ethernet Web Enabled Analogue Acquisition Unit
The RME1 is an analogue acquisition module that will accept 4-20mA, 0-10V, PT100 and thermocouple (Type J, K, T, R, N, E, S) inputs. The unit provides an output over Modbus TCP, web page (HTTP), SNPM (Version 1), CVS/XML and can be configurable with the M2M web interface. Data can..
RME2 Ethernet Web Enabled Analogue Acquisition Unit
The RME2 is an analogue acquisition module that will accept 4-20mA, 0-10V, PT100 and thermocouple (Type J, K, T, R, N, E, S) inputs. The unit provides an output over Modbus TCP, web page (HTTP), SNMP (Version 1), CVS and XML. Data can be viewed in real time, table and..
RMS2 Acquisition Module with Serial Communications
The RMS2 Modules are suitable for acquiring Voltage, Current, PT100 or Thermocouple inputs on a Modbus network. Each module can acquire inputs from up to 8 channels and convert the readings to a ModBus ASCII or Modbus RTU serial output. RMS2-AI collects 0-10V and 4-20mA analogue inputs, RMS2-PT will connect..
RMS1-TD Quad temperature meter with Modbus interface
RMS1-TD is a temperature acquisition module with serial slave Modbus communication. Accurate, yet inexpensive means of obtaining temperature readings through slave Modbus RTU. Provides an end-to-end solution for remote monitoring applications. No additional modules required...
RMS1-GR Digital and Analog I/O in Modbus Serial
The RMS1-GR allows for the acquisition of digital and analogue inputs into a Modbus serial protocol and will allow for the control of up to 16 relay or transistor outputs. The RMS1-GR can operate as a Modbus Master or Slave in Modbus RTU or Modbus ASCII...
DigiRail Modbus I/O Modules
The DigiRail Modbus I/O Modules offer versatile DIN rail mountable input/output modules for industrial automation, all configured using the free DigiConfig software via Modbus RTU commands. The DigiRail-2A provides two universal analogue inputs, supporting various signals like thermocouples, PT100s, mV, V, and mA. The DigiRail-4C is a digital counter module..
DigiRail OEE IO Module
The NOVUS DigiRail OEE is an industrial I/O module for real-time data acquisition in manufacturing environments, directly supporting Overall Equipment Effectiveness (OEE) and Manufacturing Execution Systems (MES) initiatives. Featuring 6 digital and 2 analogue inputs, plus 2 digital outputs for process control. It offers robust connectivity via Ethernet or Wi-Fi,..
