The DBBSM series loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 30,000Kgf with a standard 2.7mV/V (2mV/V above 10,000Kgf) output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ...

The DBBSMM series of loadcells are a miniature S beam, bi-directional load cell suitable for tension and compression applications. Loadcells are available with a bi-directional range of 1Kgf up to 50Kgf with a standard 2mV/V output and accuracy of 0.03%. Units can be supplied with suitable inline amplifiers to provide a calibrated 4-20mA output. ...

The DDEN series load cells are an inline bi-directional load cell suitable for tension and compression applications in areas likely to be submerged. The DDENA version is fitted with an integral amplifier and can incorporate any of the ICA series amplifiers, or DCELL RS485 signal digitisers. ...

Ranges 1 tonne to 300 tonnes, output 1.5mV/V, accuracy 0.20%, sealed to IP66 (IP67 & IP68 submersible optional) ...

The CCDDT load cells are dome top column load cells designed for the measurement of compressive forces. The CCDDT can be used for applications including hydraulic press calibration, pile force measurement, jack force measurement, centre of gravity measurement systems and structural proof testing. Ranges 2 to 1,000 tonnes. Standard output is 1.5mV/V with an accuracy of ±0.25% and options for inline amplifiers for standard 4-20mA or voltage outputs. ...

The CBES load cell is a low profile load cell designed for the measurement of compressive forces. The CBES is equally suited for both force measurement and weighing applications alike. The compact design allows the cell to be fitted into the smallest of spaces can be retrofitted in weighing systems, the low height gives an added benefit in that it does not increase the headroom required for vessels and is simple to install. Ranges 50 ...

The CDFT micro button load cell is designed for compression measurement where space is extremely limited. Measuring just 9mm in diameter and 2.9mm in overall height, the CDFT is the smallest compression load cell that we offer. Ranges 10N to 250N. Standard output is 0.5 o 2mV/V with options for inline amplifiers for standard 4-20mA or voltage outputs and handheld display for immediate readout. ...

The CCG load cell is an annular/force washer load cell designed for the measurement of compressive forces and they are suitable for use in a wide range of research and industrial applications. The CCG load cell is often used in electro-mechanical test rigs and other critical bolted installations for monitoring continuously, or periodically, the tension profile of bolts during their use in the installation. The CCG load cell can also be used in cable tension ...

The OBUC series of loadcells are single point load cells designed for applications where the point of application of the load or force may vary. Single point load cells are primarily designed for the platform type weighing scales where applications are diverse, ranging from weighing a few Kg to heavy canisters of nitrogen gas. Other applications include low range tensile test machines, robotics and web tension measurement. Load cells are available with a range of ...

The OBBS Series of load cells are bending beam load cells designed for low capacity weighing applications, such as batching hoppers, low profile platforms and conveyor packing and weighing hoppers. Their IP68 environmental protection rating, polyurethane shielded cable and stainless steel construction makes it ideal for use in weighing applications such as food, pharmaceutical, brewing etc. Load cellls are available with vessel mounts for static applications and shock mounts where vibration and transient loads may ...