N20K48 Process Controller
The N20K48 is a compact controller that can be expanded by a wide range of micromodules to fit any application. The N20K48 micromodules use ClickNGo technology to allow the module to fit the display and be easily configured using the QuickTune Mobile app..
N1020 Temperature Controller
The Novus N1020 is a compact, ultra-shallow 1/32 DIN PID temperature controller designed to deliver high-precision industrial control at a low cost. It features automatic tuning for both PID and ON-OFF control modes, universal input support for PT100 RTDs, Thermocouples and 0-50mV. plus one SSR-driving pulse and electromechanical relay. Built..
N1040 Temperature Controller
The NOVUS N1040 is a compact, ultra-shallow 1/16 DIN PID temperature controller designed to deliver high-precision process control at a low cost. It features automatic tuning for both PID and ON-OFF control modes, universal input support for PT100 RTDs as well as J, K, and T thermocouples, and up to..
N1040i Universal Process Indicator
The N1040i Universal indicator is a compact universal display suitable for most common Thermocouple, PT100 RTD and linear 4-20mA, Voltage and mV inputs. The unit is housed in a 1/16 DIN enclosure with a very simple configuration interface to allow programming. The N1040i has optional RS485 interface, two optional alarm..
N1040T Time and Temperature Controller
The N1040T is a compact, cost-effective temperature and time controller featuring automatic tuning for both PID and ON-OFF control, housed in a flame-retardant casing with reduced depth. It supports PT100 sensors and J/K/T thermocouples with decimal precision, and includes a quick-connect wiring system to simplify installation. Equipped with two independent..
N1050 Temperature PID Controller
The Novus N1050 features a high-contrast, multi-colour LCD display designed with custom 11-segment alphanumeric characters that present process variables, parameters, and status messages clearly. Built into a compact 1/16 DIN panel format, it offers wide, multi-angle readability alongside large numerical digits for quick monitoring. Dedicated indicators line the display area..
N480D Series PID Temperature Controller
The N480D series of PID temperature controllers were designed to provide a high performance inexpensive high end controller with simple configuration and use. The controller will accept temperature inputs from Thermocouples and PT100 RTD sensors and has a wide range of options of two SPST, one SPDT, logic pulse and..
LoopView Display
LoopView is a two-wire 4-20 mA loop indicator, low power loop-powered indicator. It has a DIN connector standard EN 175301-803 (old DIN 43650 form A) male and female connectors. LoopView is powered by the current loop itself and allows to be inserted into sensors already installed in industrial facilities, to..
Universal Indicator N1500
High performance, universal panel mount indicator suitable for a variety of signals and sensors including RTD s, load cells, thermocouples, voltage and current. Large range of output options including relays, analogue retransmission and RS485 for connection to systems supporting the MODBUS protocol. Easy to program via front keypad, ultra bright..
Large Digit Universal Indicator N1500-G
Similar features to the N1500 indicator however with large 56mm, ultra bright LED display. Suitable for applications where the display has to be viewed over a considerable distance...
Temperature Controller N960
The N960 temperature controller is an ideal replacement for obsolete potentiometric controllers, combining simple operation with the high precision of a PID controller. It has a dual display, with an 18mm display for measuring variables and a 13mm display for Setpoints. N960 is the ideal device for applications that require..
Universal Controller N2000
The N2000 Universal Process controller is a real breakthrough in versatility for holding in one single instrument all the major features required in the vast majority of industrial processes...
Universal Controller N2000S
The N2000S is a complete servo position controller engineered for precise and reliable control in critical processes. Designed for motorised valves, servo actuators, and dampers, it features two dedicated opening/closing relays, a programmable 0/4–20 mA analogue output, configurable for control or PV/SP retransmission, and a universal input compatible with most..
Universal Controller N3000
The N3000 is a Big Digit Universal Process Controller similar to the N2000 display but larger with 18mm PV Red Digits and 13mm SV Green Digits in a 96 x 96 x 92mm display. The basic N3000 unit includes one universal input, two SPST relays, two SPDT relays, 24vDC output..
