omni instruments | sensors and data acquisition equipment

Sales & Technical Support

Edit Content

3000 Slim Series of 6mm Signal Conditioner and Isolators

Edit Content

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...

3225 Slim Series Universal Frequency Converter

The 3225 is a universal frequency to current/voltage or frequency to frequency converter. The 3225 accepts a frequency input between 0 and 100kHz and produces an active current output 0-23mA, Voltage output (0-1, 0-5, 0-10, 0.2-1 or 2-10vDC) or a Relay output. The unit is configured via DIP Switches and ...

3100 Slim Series of 6mm Isolators & Converters

The Slim Series is a range of 6mm isolators, converters, repeaters and splitters. This series is designed for galvanic isolation of RTD, TC, potentiometer, mA and V signals as well as conversion of these signals into a standard current/voltage signal. The series includes an isolated universal converter, 2-channel devices, signal ...

3186 Slim Series of 6mm Transmitter/Current Isolators

The 3186 Slim Series Isolators providing a 1:1 conversion of 4-20mA signals. The 3186A provide a 2-wire isolation with excitation and can be used to measure Passive input signals. The 3186B is used for Active input signals. Both are loop-powered devices and will cause a voltage drop of ≤3V. Accuracy ...
Edit Content

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and thermocouples into a HART system. All units are ATEX approved for Zone 2 environments, including the power rail and power control units. ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART 7 protocol unit that allow for integrating PT100 and thermocouples into a HART system. HART 7 revision protocol allows for extended programming. All units are ...

3225 Slim Series Universal Frequency Converter

The 3225 is a universal frequency to current/voltage or frequency to frequency converter. The 3225 accepts a frequency input between 0 and 100kHz and produces an active current output 0-23mA, Voltage output (0-1, 0-5, 0-10, 0.2-1 or 2-10vDC) or a Relay output. The unit is configured via DIP Switches and via 4590 programmer. Units are ATEX, IECEx and UL approved for use in Hazardous Areas. ...

3100 Slim Series of 6mm Isolators & Converters

The Slim Series is a range of 6mm isolators, converters, repeaters and splitters. This series is designed for galvanic isolation of RTD, TC, potentiometer, mA and V signals as well as conversion of these signals into a standard current/voltage signal. The series includes an isolated universal converter, 2-channel devices, signal splitters, repeaters and devices with loop supply >17 V / 20mA. All units are ATEX approved for Zone 2 environments (except 3105). ...

3186 Slim Series of 6mm Transmitter/Current Isolators

The 3186 Slim Series Isolators providing a 1:1 conversion of 4-20mA signals. The 3186A provide a 2-wire isolation with excitation and can be used to measure Passive input signals. The 3186B is used for Active input signals. Both are loop-powered devices and will cause a voltage drop of ≤3V. Accuracy better than 0.05% over a range of 3.8-20.5mA. Units are ATEX approved for Zone 2 environments. ...

3100 Slim Series of 6mm Temperature Transmitters

The Slim Series is a range of 6mm isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to output and temperature ranges. The series includes HART 7 protocol units for integrating PT100 and ...

PR 3300 Series Loop-Powered Temperature Converters

The PR 3300 Series is a range of 6mm loop-powered temperature isolators and signal converters suitable for use with K & J Type thermocouples and PT100 temperature sensors. Programming is achieved via selectable DIP switches allowing changes to 4-20mA output and temperature ranges. The series includes the PR 3337 HART ...

3225 Slim Series Universal Frequency Converter

The 3225 is a universal frequency to current/voltage or frequency to frequency converter. The 3225 accepts a frequency input between 0 and 100kHz and produces an active current output 0-23mA, Voltage output (0-1, 0-5, 0-10, 0.2-1 or 2-10vDC) or a Relay output. The unit is configured via DIP Switches and ...

3100 Slim Series of 6mm Isolators & Converters

The Slim Series is a range of 6mm isolators, converters, repeaters and splitters. This series is designed for galvanic isolation of RTD, TC, potentiometer, mA and V signals as well as conversion of these signals into a standard current/voltage signal. The series includes an isolated universal converter, 2-channel devices, signal ...

3186 Slim Series of 6mm Transmitter/Current Isolators

The 3186 Slim Series Isolators providing a 1:1 conversion of 4-20mA signals. The 3186A provide a 2-wire isolation with excitation and can be used to measure Passive input signals. The 3186B is used for Active input signals. Both are loop-powered devices and will cause a voltage drop of ≤3V. Accuracy ...

Contact us

8:30 AM to 5 PM Monday to Thursday
8:30 AM to 3 PM on Friday.

A real person will answer the phone and deal with your enquiry

We are here to help

Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.

Enquire now