The SHP1 pyrheliometer is a high quality radiometer used for the measurement of direct solar radiation. The SHP1 combines the sensor technology of the CHP1 with a smart interface to provide an RS485 Modbus and an amplified analogue output. The SHP1 has options for a 4-20mA or 0-1V output signal that is consistent between instruments and after recalibrations. The serial output is addressable and can also provide additional information on the individual units. The pyrheliometer needs to be pointed at the sun at all times and the Solys2 and 2AP Suntrackers have been designed to incorporate a SHP1. Every SHP1 is supplied with a calibration certificate traceable to the World Radiometric Reference and is valid for 1 year from the date of first use by the customer.
The SHP 1 Pyrheliometer is a combination of the design and sensor technology of the CHP 1 with an integrated smart interface to provide an amplifier analogue output along with a detailed 2-wire RS485 Modbus protocol signal. Information on the units serial number, instrument settings, calibration history, etc can all be obtained from the unit via the Modbus output.Also, after recalibration, the sensor will retain the same analogue and digital measurement ranges meaning the associated data collection equipment does not require any adjustment, even replacement SHP 1’s can be configured with the same settings.
A complete digital solar monitoring system can be built using a Solys2 suntracker, SHP1 (Direct solar radiation), SMP11 (Total global radiation) and a shaded SMP11 (diffuse solar radiation). All readings can then be collected via Modbus to a suitable data logging system, eg a DT82I data logger.
Diagram
Specification
| Spectral range: | 200 to 4000nm |
| Response time: | <2 seconds (95%) |
| Analogue Output: |
-V Version: 0-1V -A Version: 4-20mA |
| Serial Output: | 2-wire RS485, Modbus |
| Analogue Output Range: |
-V Version: -200 to 2000Wm² -A Version: 0 to 1600Wm² |
| Temperature dependence of sensitivity: | <0.5% (-30 to +60°C) |
| Operating temperature range: | -40 to +80°C |
| Field of view: | 5° ±0.2° |
The SHP 1 has a maximum output range of -200 to 4000Wm² and the analogue outputs can be rescaled to your own requirements.The negative range is used to show negative readings and if used in atmospheric conditions it is advised to keep the factory settings.
Associated University Paper
Nakhon Pathom Rajabhat University, Thailand – Basic Meteorology
0375900-100
£3,508.00
0375900-102
£2,643.00
0375900-200
£3,508.00
0375900-202
£3,643.00
2523146
£51.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
