These Tinytag Plus 2 loggers are designed to monitor standard mA or vDC inputs in the ranges of 0-25mA, 0-2.5 and 0-25vDC. The TGP-4703 cover a voltage range of 0-2.5vDC and the TGP-4704 0-25vDC. The TGP-4804 covers a current range of 0-25mA. The unit has a waterproof case and features high reading resolution and accuracy, a large memory, a fast offload speed and a low battery monitor. These units are supplied with a 1m long input lead with flying leads for easy connection.
The Tinytag Plus 2 Instrumentation range of data loggers allow for low DC voltage or 4-20mA current inputs. Logger have an internal memory for up to 32,000 readings, low battery monitor, high accuracy and improved reading resolution. The Tinytag Instrumentation loggers replace the existing Tinytag Re-Ed range, and these loggers can be used to record outputs from third party sensors, enabling users to measure a wide range of properties such as solar irradiance, heat flux, pressure, flow rate, etc.
| Â Part Number: | TGP-4703 | TGP-4704 | TGP-4804 |
| Â Input Range | 0-2.5vDC | 0-25vDC | 0-25mA |
|  Resolution: | 0.1mV | 1mV | 1µA |
|  Accuracy: | 0.2% of reading ±10mV | 0.2% of reading ±20mV | 0.2% of reading ±20µA |
| Â Internal Memory: | 32,000 Readings | ||
| Â Start Options: | Magnetic Switch, Relative/Actual (up to 45 days) | ||
| Â Stop Options: | When Full, After No. of Readings, Never (wrap around) | ||
| Â Reading Types: | Actual, Minimum, Maximum | ||
| Â Logging Interval: | 1 second to 10 days | ||
| Â Offload: | While stopped or when logging in minute multiples | ||
| Â Alarms: | Two, fully programmable | ||
|  Functional Range: | -40°C to +85°C | ||
| Â Dimensions: | 80mm (Height) x 59mm (Width) x 34mm (Depth) | ||
| Â Weight: | 110g | ||
Each logger is supplied with a 1m input cable, CAB-3239.
| CAB-3239Â | Tinytag Voltage/Current Input Lead |
| Cable Length: | 1m |
| Cable Material: | PVC |
| Temp Rating: | -10 to +85°C |
| IP Rating: | IP68 (Connector) |
| Weight: | 60g |
A 5-pin plug, ACS-9703, is available separately.
| ACS-9703 |
5-Pin Plug |
| Shell Material: | Brass and Zinc Alloy (Nickel plated) |
| Contact Material: | Cooper Alloy (Gold plated) |
| Temp Rating: | -40 to +85°C |
| IP Rating: | IP68 (-25 to 85°C) |
| Weight: | 15g |
The standard configuration will record the values in voltage or milliamps at each user-defined logging interval. Loggers can be factory configured for use with a third-party sensor, with specific values, for applications such as pressure, wind speed or scaled values. To confirm that this logger can be configured to work with a specific sensor, please contact us or fill in the attached Configuration Form. Without Custom Configuration, the logger will only show the voltage or current at each logging interval.
TGP-4703
£125.00
TGP-4704
£125.00
TGP-4804
£125.00
TGP-4703-ED
£175.00
TGP-4704-ED
£175.00
Need help with your products or have a question for us on our custom systems? Use the form below to send us a message and our experts will be in touch to help.
